BuildYourCNC - 3/4 x 3/4 x 1/8 Aluminum Rail

3/4 x 3/4 x 1/8 Aluminum Rails 6061 - Inside Dimension 0.5830 inches

3/4 x 3/4 x 1/8 Aluminum Rails 6061 - Thickness 0.13 inches

3/4 x 3/4 x 1/8 Aluminum Rails 6061 - Outer Width 0.751 inches

3/4 x 3/4 x 1/8 Aluminum Rail

Price Options Your Cart

3/4 x 3/4 1/8 Aluminum Rail 6061 per foot - specify full amount needed in QTY, send email with specific cut lengths

$1.20

Total Length:

Introduction:

We use these aluminum rails as guide rails that the v-groove bearings ride along. The aluminum specification is 6061-T6 which is known for its structural characteristics.

Description:

Made out of high strength, high quality aluminum. This is used with our v-groove bearings, as tracks, for things like our gantry setups on our machines.

The actual dimensions are as follows:

Inside Dimension 0.5830 inches

Thickness 0.13 inches

Outer Width 0.751 inches

Ask a question about the 3/4 x 3/4 x 1/8 Aluminum Rail:

Previously answered questions:

Click on the question to reveal the answer.

No previous questions. Be the first to ask a question about this product.

----

Related Tutorials

Two motors moving in opposite directions

How To Have Two Motors on a Single Axis Spinning in Opposite Directions on a CNC Machine
In this tutorial we will demonstrate how to have two motors on a single axis spinning in opposite directions with the use of a hex inverter.

Step 12: Gantry Linear Slide Bearings
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. Hey, where did that day go?? Man, time is a passin' and I just can't keep up. Well, today you will see the slide bearings for the gantry. These are very long linear slide bearings. They are long for a good reason. First, the gantry is big. Second, the gantry is heavy. Third, the gantry is made of MDF. Fourth, the gantry is made by HAND! Oh, did I say that the gantry is heavy??

Wiring Instruction for the Electronics Combo
Check out my new wiring videos here. They are full of great information on wiring the motors and drivers in a much easier way, and with troubleshooting and testing throughout.

Related Products

Thumbnail: CNC Machine Depreciated Version 1.2

CNC v1.2 Assembly: Stepper Drivers, Motors, and Power

V-Groove Bearings 3/16 inch ID

V-Groove Bearings 3/8 inch ID

blackTooth Laser Cutter/Engraver on Kickstarter

CNC Routing Machine Kit Version 1.3

1.5 kW (kilowatt) Inverter (Variable Frequency Drive - VFD)

----