[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 1019

Question: Hi does your company offer financing?

Current Solution

For financing option, you can use the Bill Me Later feature offered by PayPal.

Respond:

Other Possible Solutions to this Question

  • What are your terms and conditions for financing?

    We work with banks who will process financing requests. For more information about submitting an application for financing please contact sales@buildyourcnc.com

    Click the link to respond:
    What are your terms and conditions for financing?

  • Do you offer single shaft NEMA 34 steppers in your cnc kits?

    Our NEMA 34 motors have a dual shaft, meaning, there is a shaft that extends from the front and rear. Our machines use this dual shaft motor in our machines. Currently we do not sell/carry any of these motors with one-input shaft.

    Click the link to respond:
    Do you offer single shaft NEMA 34 steppers in your cnc kits?

  • WHAT DOES YOUR HEART PUMP?

    Your heart pumps blood.

    Click the link to respond:
    WHAT DOES YOUR HEART PUMP?

  • Does your parallel breakout board support macn4?

    Yes, the parallel breakout board can be used with the parallel plug-in that is offered by the mach CNC software developers.

    Click the link to respond:
    Does your parallel breakout board support macn4?

  • How many poles and pairs does your 2.5 KW spindle have?

    Our spindles are 2 pole, however we do not understand the "and pairs" portion of your question?

    Click the link to respond:
    How many poles and pairs does your 2.5 KW spindle have?

  • Do you offer a touch plate kit? If not can a touch plate kit be added to your machines if so whats the process?

    Yes, you can add a touch plate kit. A touch plate works just like a limit switch. All you need are alligator clips and a conductive plate. Solder a wire to the conductive plate material and connect that to an IN (input) terminal. Connect the alligator clip to the gnd of the input and then to the end mill. Enable the home setting for the Z axis in Mach3 or Mach4 and use the "ref all home" button to home all of the axes. The z axis will home at the touch plate. Make sure that the touch plate is under the end mill when the z-axis is in the homing process.

    Here is a tutorial I made a while ago that explains this:
    https://buildyourcnc.com/PrimeronHomingandLimitSwitches.aspx

    Let me know what you think by click on the "submit response".

    Thanks

    Click the link to respond:
    Do you offer a touch plate kit? If not can a touch plate kit be added to your machines if so whats the process?

  • where is the company located

    We are located in Katy, TX

    Our Address is:
    20734 Settlers Lake Cir N.
    Katy, TX 77449

    Click the link to respond:
    where is the company located

  • Do you offer plans for the blackToe CNC Machine?

    The blackToe machine is offered as a kit only. We do have a machine that is build form plans. The plans refer to the scratch build machine: http://www.buildyourcnc.com/cnckitintro.aspx and the one in the book "Build Your Own CNC Machine": http://www.buildyourcnc.com/Book.aspx

    Additional Information:
    20

    Click the link to respond:
    Do you offer plans for the blackToe CNC Machine?

  • DOES YOUR COMBO #1 WITH PLANS AND THE DVD COME COMPLETE PARTS LIST?

    The parts list is located on this page: http://buildyourcnc.com/cnckitintro.aspx at the bottom of the description.

    Click the link to respond:
    DOES YOUR COMBO #1 WITH PLANS AND THE DVD COME COMPLETE PARTS LIST?

  • Does your Planet CNC Software have a Digitizing Wizard like Mach 3?

    Planet CNC is currently based in the UK as a independent company, and has a G-code wizard similar to the digitizing wizard in Mach 3. Although different software, you may download a demo here (http://www.planet-cnc.com/index.php?page=download) (first link).

    Click the link to respond:
    Does your Planet CNC Software have a Digitizing Wizard like Mach 3?

  • Laser; does your new laser controller uses the stander g-code files??

    No, the laser controller does not run standard g-code. Instead it uses a version of a printer control language which provides optimal results when processing detailed images and designs. If you need or want to control your laser with g-code, however, you can do so by running it from a computer using a standard machine control software. You can even set your laser up to operate both ways. Feel free to contact us directly if you need help sorting through your options.

    Click the link to respond:
    Laser; does your new laser controller uses the stander g-code files??

  • About your HIWIN rails. What Carriage block does the 78" rails come with, 2 flange or 2 with no flange?

    The HIWIN rails come with the same flange blocks that are sold individually.

    Click the link to respond:
    About your HIWIN rails. What Carriage block does the 78" rails come with, 2 flange or 2 with no flange?

  • Does your breakout board work with low voltage 3.3volt parallel ports?

    The breakout board will work with 3.3 volt parallel port. The integrated circuits on the board bring the level up to 5 volts for each pin when engaged. The breakout board is powered from the USB port and this is where the 5 volts is acquired.

    Click the link to respond:
    Does your breakout board work with low voltage 3.3volt parallel ports?

  • do your machine come with touch plate

    We can provide a touch plate. It is being developed.

    Click the link to respond:
    do your machine come with touch plate

  • do you built the machine yourself ?

    The blackToe machine is offered as a kit only. We do have a machine that is build form plans. The plans refer to the scratch build machine: http://www.buildyourcnc.com/cnckitintro.aspx and the one in the book "Build Your Own CNC Machine": http://www.buildyourcnc.com/Book.aspx

    Additional Information:
    20

    Click the link to respond:
    do you built the machine yourself ?

  • USPS does not recognize my address -- and your phones are never answered!

    We answer our phones during our business hours Monday -Friday from 9:00 to 5:00 CST. If you tried to call during those times, let me know. Thanks.

    We are having issues with our integration with stamps.com. I am looking into the situation now. Thanks.

    Additional Information:
    Let me know if you still need assistance. Thanks.

    Click the link to respond:
    USPS does not recognize my address -- and your phones are never answered!

  • USPS does not recognize my address -- and your phones are never answered!

    The blackTooth is a laser cutter/engraver, and its current design directs the beam in 2 dimensions (X and Y) over the surface of a workpiece which is assumed to be lying flat beneath the laser head. There is no mechanism to move the Z-axis directly. There is likewise no direct provision to move either the workpiece or the laser head for a 4th or 5th axis of operation because that would change the optical path and/or the focal point. However, you could certainly add a 4th axis to move a workpiece beneath the laser head -- it would be an interesting project, and if you do it we would like to see pictures.

    The ability of the software to support this addition depends upon which software you are using. If you are using a breakout board and machine control software designed for conventional CNC mills, such as Mach3, LinuxCNC, or PlanetCNC, then the answer is yes, the software will support the 4th axis quite easily. If you are using the integrated laser controller, the adaptation would be more difficult.

    Click the link to respond:
    USPS does not recognize my address -- and your phones are never answered!

  • What cnc machine does the plans refer to?

    The plans refer to the scratch build machine: http://www.buildyourcnc.com/cnckitintro.aspx and the one in the book "Build Your Own CNC Machine": http://www.buildyourcnc.com/Book.aspx

    Click the link to respond:
    What cnc machine does the plans refer to?

  • Do you ship your kits to france?

    You can determine if the country is serviceable by:
    - selecting the items you want to purchase on the website
    - go to the cart (shopping cart top left of any webpage)
    - log in, or register
    - Enter the address and click on calculate shipping.

    The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

    The shipping times are determined by the service you select in the shopping cart. If a machine is purchased, we generally have a one week lead time unless otherwise stated in the description of the machine's product page.

    Click the link to respond:
    Do you ship your kits to france?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.