[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 1185

Question: Can we order a preassembled version of the blacktooth laser cutter and what would the lead time be.

Current Solution

We do have the option of assembled blackTooth CNC.
For further information on lead time and quote; please email (customerservice@buildyourcnc.com)

Respond:

Other Possible Solutions to this Question

  • I ordered the blacktooth laser cutter, there were only 4 red spade terminals, but the instructions pictures show that there should be more and would include blue spade terminals

    If you received fewer parts than is called for in the instructions, we will send the proper parts to you. Please call us to have these parts sent to you.

    Click the link to respond:
    I ordered the blacktooth laser cutter, there were only 4 red spade terminals, but the instructions pictures show that there should be more and would include blue spade terminals

  • WHAT CAN ADD TO MY BLACKTOOTH LASER CUTTER MEASURE THE TIME OF USE?

    Hour meter. This will tell you exactly how long your system has been 'on' giving you a more accurate bead on the length of your tubes life.

    Click the link to respond:
    WHAT CAN ADD TO MY BLACKTOOTH LASER CUTTER MEASURE THE TIME OF USE?

  • what are the specs of the blacktooth laser cutter (dimensions and weight) when assembled?

    The blackTooth envelope dimensions and weight:

    - Length and width: 37" x 34"
    - The height: 11.25"
    - The weight: 70 lbs.

    Click the link to respond:
    what are the specs of the blacktooth laser cutter (dimensions and weight) when assembled?

  • I am building the Blacktooth laser cutter. What is the safest and most accurate way to test the output of the laser power supply WITHOUT connecting the laser tube? Can I use a standard multimeter and measure the voltage output of the laser power supply?

    You can test the power supply, but you will need to take extra special care since the voltage on the high tension line can be lethal. Go to this instructable to see all the step on testing the power supply:

    http://www.instructables.com/id/How-to-test-and-set-a-Chinese-China-made-CO2-Laser/?ALLSTEPS

    Additional Information:

    Click the link to respond:
    I am building the Blacktooth laser cutter. What is the safest and most accurate way to test the output of the laser power supply WITHOUT connecting the laser tube? Can I use a standard multimeter and measure the voltage output of the laser power supply?

  • Hi, I live in Australia and am looking at purchasing the Blacktooth laser cutter and engraver. I am wondering what the cost to ship to Australia would be?

    You can use our shopping cart to determine the shipping. Add the machine and the parts you want to purchase, enter your shipping address and click on the Calculate Shipping Button to get a price for shipping. The shipping charges are determined directly from the carriers at the time of pressing that button.

    Click the link to respond:
    Hi, I live in Australia and am looking at purchasing the Blacktooth laser cutter and engraver. I am wondering what the cost to ship to Australia would be?

  • what is the size/width of pulley and timing belt used in Blacktooth laser cutter ?

    The blackTooth uses MXL timing belt with 1/4" MXL Drive Pulley 20 teeth.

    Click the link to respond:
    what is the size/width of pulley and timing belt used in Blacktooth laser cutter ?

  • What kind of cooling system should we set up for the Blacktooth laser cutter laser tube? Can tap water be used? Is water temperature critical?

    The blackTooth's 40 watt laser tube can be cooled with simple tap water. A bit of anti-freeze keeps the tap water clean and free of algae. The cooler the water, the better output you will get from the laser. A great source of information can be found here: http://www.buildyourtools.com/phpBB3/viewtopic.php?f=8&t=3452

    Click the link to respond:
    What kind of cooling system should we set up for the Blacktooth laser cutter laser tube? Can tap water be used? Is water temperature critical?

  • WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

    If you take the standard parallel cable BoB (Break Out Board), then you will need control software (Mach 3 or EMC2) and CAM software to make your G-Code (such as CamBam). Personally I use CamBam and Mach 3, they work beautifully but don't expect to turn them on and know how they work out of the box. Give yourself a few weeks to get familiar with the basics. CamBam is VERY powerful software for it's price. I'm surprised how much I keep learning on what I can do with it...I highly recommend it if you want as much control as possible.

    Mach 3 + CamBam as a bundle costs $310. EMC2 will give you a free replacement for Mach 3 and is exclusively for Linux.

    If you use the USB BoB, it will cost an extra $75 + $75 for the software. This is an all-in-one package so no need for Mach 3 or CamBam.

    For etching rasters (jpeg, bmp, tiff, non-vectors, photos), I highly recommend PicEngrave. It has been a labor of love for the past 9 years and John has done a wonderful job with it. It easily compares in quality compared to software that is in the $200-$300 range. John's software runs $40 and can be found here: http://picengrave.com/ (don't let the modest website fool you, this stuff can do amazing things). DotG and the Mach3 engrave plugin are two other options and instructions can be found on Dustans page in the gallery on buildyourcnc.com website.

    Click the link to respond:
    WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

  • WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

    I would say mechanically, between the official build instructions, Warren's awesome blog (http://blacktoothlaser.blogspot.com/) and the tips in the forum, the blackTooth is a really simple build. The challenges come with electronics and software. There's a number of different ways to drive the laser and motors. A decent understanding of electronics and computers is a must.

    Click the link to respond:
    WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

  • I ordered a Blacktooth Laser, but received no response that processing of the order has started? Will I be notified of shipping as soon as the weeks lead time is complete?

    Once we create the tracking information for an order, and it is entered into our system, you get emailed to the email address on file, with the tracking information. Sometimes these emails end up in the spam folder of your email, so please check there as well. You can also call, or email, us and we will let you know the status of your order.

    Additional Information:
    20

    Click the link to respond:
    I ordered a Blacktooth Laser, but received no response that processing of the order has started? Will I be notified of shipping as soon as the weeks lead time is complete?

  • What size and length of cable carrier suits the BlackTooth laser cutter?

    The space within the blackTooth laser cutter is so tight that a cable carrier will not fit.

    Click the link to respond:
    What size and length of cable carrier suits the BlackTooth laser cutter?

  • WHAT ARE SOME USEFUL MODIFICATIONS CAN APPLY TO THE BLACKTOOTH LASER CUTTER?

    Temperature probe monitor. Very valuable. This keeps you up to date on your coolant temperature levels.

    Voltage meter. This will tell you the exact level of voltage/power you are running telling the laser to run at instead of an arbitrary mark on a drawn wheel around your POT.

    Ammeter sensitive to 1mA. This will be sure your not over driving your tube and reducing it's life significantly.

    Hour meter. This will tell you exactly how long your system has been 'on' giving you a more accurate bead on the length of your tubes life.

    Exhaust fan upgrade. The current fan included is 100CFM. You can buy 120mm fans that push 250CFM and I have included a guide on how to go about doing this here. http://buildyourtools.com/phpBB3/viewto ... 8cdd1802bf

    To push the exhaust fan even further, if you have the room/power, I would highly recommend investing in a 600+ CFM "Dust Collector" system. 250CFM is still not suffice to draw all the smoke that can come off of 3mm or 1/8 MDF cutting job.

    A cutting surface. I bought myself a aluminum 'egg crate' mesh from my local HVAC company. They are used a cover for fluorescent lights and work great for low impact cutting surface. They come in 4'x8' sheets and are easily cut to fit. The other side is if you can find a steel honeycomb cutting bed to fit. These can be quite costly or fairly affordable depending where you are looking. The benefit of a steel honeycomb is you can use high power magnets to hold material down.

    Click the link to respond:
    WHAT ARE SOME USEFUL MODIFICATIONS CAN APPLY TO THE BLACKTOOTH LASER CUTTER?

  • I was wondering what the max depth is for something to go into the 40W C02 Laser cutter and engraver with blacktooth

    Hello, I was wondering if the Blactooth laser cutter can engrave in 3d, different depths in the same piece of wood?

    Additional Information:

    Click the link to respond:
    I was wondering what the max depth is for something to go into the 40W C02 Laser cutter and engraver with blacktooth

  • How long does processing typically take before a Blacktooth laser cutter ships? I see a week on a lot of the answers, but my order is pushing two. Since bad luck tends to follow me around, I just want to make sure I'm still in the realm of normal processing time.

    We have been quite busy during the Holiday season which is normal. This may result in extended lead times. If you would like to speak to a representative about your order please call 281-815-7701 or email customerservice@buildyourcnc.com and someone will advise you when to expect your order.

    Click the link to respond:
    How long does processing typically take before a Blacktooth laser cutter ships? I see a week on a lot of the answers, but my order is pushing two. Since bad luck tends to follow me around, I just want to make sure I'm still in the realm of normal processing time.

  • WHAT CAN USE BELOW MY WORKPIECE AS SUBSTRATE IN BLACKTOOTH LASER CUTTER?

    A cutting surface. I bought myself a aluminum 'egg crate' mesh from my local HVAC company. They are used a cover for fluorescent lights and work great for low impact cutting surface. They come in 4'x8' sheets and are easily cut to fit. The other side is if you can find a steel honeycomb cutting bed to fit. These can be quite costly or fairly affordable depending where you are looking. The benefit of a steel honeycomb is you can use high power magnets to hold material down.

    Click the link to respond:
    WHAT CAN USE BELOW MY WORKPIECE AS SUBSTRATE IN BLACKTOOTH LASER CUTTER?

  • What file types can the blackTooth Laser Cutter accept?

    LaserCAD and the Anywells Laser Controller used in our BlackTooth and Vertical Laser XL laser cutters and engravers can accept these file types:

    .nc (Gcode)
    .ai (Adobe Illustrator)
    .svg
    .pdf (Adobe Acrobat)
    .dxf (AutoCAD and Drawing Exchange)
    .plt
    .dst
    .dsb
    .uds (UD)
    .bmp (Bitmap image)
    .gif (Image)
    .jpg (Joint Photographers)
    .png

    Click the link to respond:
    What file types can the blackTooth Laser Cutter accept?

  • I am looking at buying the blacktooth-laser-cutter-engraver-40w. Can you give me some idea of the types and thickness of material this machine will cut and/or ingrave?

    Considering that "materials being lased by may emit gasses that are harmful to humans (corrode human tissue and cause damage to respiratory organs). Always read the MSDS (Material Safety Data Sheet) for the material to be lased. You can find these MSDS from manufacturer websites for the material you are considering for use in the laser system."
    We successfully have worked on Thin sheets of Brasswood, glass, foam, plexi-glass. The thickest materials you will be able to successfully cut is 1/4".

    Click the link to respond:
    I am looking at buying the blacktooth-laser-cutter-engraver-40w. Can you give me some idea of the types and thickness of material this machine will cut and/or ingrave?

  • Is the blackTooth Laser Cutter available for custom size orders?

    We will generally consider a change in dimensions or machine features if the change will be beneficial to other users as well. This is due, in part, to the time it takes to make such changes and that it maintains the desired functionality and expected safety.

    What dimensional changes do you wish for the blackTooth?

    Additional Information:
    I was hopping to be able to have a cutting surface of 2' x 4'

    Additional Information:
    We have that size in our queue to be designed. However, you may be more interested in the laser adapter we are designing for the existing CNC machines to house a laser tube on the z-axis of these machines. This will be a quicker turnaround.

    Additional Information:
    Is there a time frame possibly to having this adapter made as well as cost? I am possibly looking to start a business so I am looking for something I can use to mass produce some specific parts.

    Additional Information:
    There is one project that takes precedence to the adapter, so I would expect in two months time.

    Click the link to respond:
    Is the blackTooth Laser Cutter available for custom size orders?

  • how long would it take to build the blacktooth laser cutter?

    The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

    Click the link to respond:
    how long would it take to build the blacktooth laser cutter?