I'd like complete package pricing, for a 110 unit 2'x4'.we can talk options later ,just need a basic turn key price.ill be rough carving arch top guitar tops and backs mostly.thankyou Greg m

Question #: 12183

Question: I'd like complete package pricing, for a 110 unit 2'x4'.we can talk options later ,just need a basic turn key price.ill be rough carving arch top guitar tops and backs mostly.thankyou Greg m

Current Solution

Hi Greg, You are looking at roughly $2600-3800. We have to give you a range rather than a number because the options matter a good deal in this case, particularly depending what computer equipment and software you might already have and your comfort level with electronics. Please send us an email at sales@buildyourcnc.com to discuss the various options and which would be best for your use case. With a couple of questions we can tell you exactly what your price would be.

Respond:

Other Possible Solutions to this Question

How can i get a complete list of all the components (electronics) I need for a CNC laser cutter with the laser controller? A wiring Diagram would probably be very helpful.
All the options for and variations of our blackTooth laser cutter/engraver are available on our website here https://buildyourcnc.com/blackToothLaserCutterAndEngraver.aspx#prettyPhoto. The wiring diagram is available here: https://buildyourcnc.com/blackToothLaserCutterAndEngraver.aspx#prettyPhoto/0/
We do not offer plans or a bill of materials for our machines at this time, but if you are interested in doing your own from scratch you can learn a lot about the design and build process from our tutorials. We wish you success in your endeavors.
Click the link to add information to this solution:
How can i get a complete list of all the components (electronics) I need for a CNC laser cutter with the laser controller? A wiring Diagram would probably be very helpful.
I am building a wet plasma table for my shop that is 8'x 16'. I will need hardware and software. Please heko me wuth the list, My phone is 9124273734. I would like to talk with someone if possible. Thanks, Rus
If you purchase the greenLean, you will get everything you need except a router, computer to operate the machine, and software to control the machine. You state that you have a computer. You can use this computer, but you will need to determine if it has a parallel port, or if you are going to need the USB controller option. As for the software, there are too many different options for you to choose from. We would not be able to tell you which to get, and how much it will cost you. This is a matter of preference. I can tell you, however, that you will need 3 types of software to complete a CNC project. You will need CAD software to design your design, CAM software to add tool paths and convert the design to g-code, and then control software to take the g-code and operate the machine.

Additional Information:
20
Click the link to add information to this solution:
I am building a wet plasma table for my shop that is 8'x 16'. I will need hardware and software. Please heko me wuth the list, My phone is 9124273734. I would like to talk with someone if possible. Thanks, Rus
I already built a 4 x 8ft carving machine, I would like to modify for laser cutting wood. Do you sell a conversion kit? I use Mach3 software and steppers. Thanks Ray
We offer a laser/spindle Z-axis attachment for our 4x8 greenBull CNC. The blackFoot 4x8 does not have a large enough gantry to accommodate the 40W laser tube.

Additional Information:

Additional Information:
We do sell the parts to convert your CNC milling machine to a laser, but you will need to develop the mounts that will hold all of the laser parts to the machine, if the machine was design and built by you.

We can offer guidance for this conversion.

The laser parts can be found here:
https://www.buildyourcnc.com/LaserComponents.aspx
Click the link to add information to this solution:
I already built a 4 x 8ft carving machine, I would like to modify for laser cutting wood. Do you sell a conversion kit? I use Mach3 software and steppers. Thanks Ray
I received my package and everything looks perfect but there wasn't an invoice in it. Can you please send me an invoice for my order? My tracking number was 9405511699000982499109.
Yes. We will send you an invoice for your order poste haste. Thanks you for your order and we apologize if this has caused you an inconvenience.

Additional Information:
Thank you very much! I really appreciate it.
Click the link to add information to this solution:
I received my package and everything looks perfect but there wasn't an invoice in it. Can you please send me an invoice for my order? My tracking number was 9405511699000982499109.
[575] Can the 24VDC supply used for the interface board be the same supply used for stepper drivers, or do you need separate power supplies? If not, does GND and DCM need to be isolated?
I would recommend using a separate 24VDC power supply for the controller. The 24VDC that is connected to the controller is used for delicate input signals and output signals that control external devices. To keep interference and possible current and voltage fluctuations at a minimum due to the motor load, a separate power supply would be best.
Click the link to add information to this solution:
[575] Can the 24VDC supply used for the interface board be the same supply used for stepper drivers, or do you need separate power supplies? If not, does GND and DCM need to be isolated?
[59] is it ok to use one pin for all of the limit switches wired NC and another pin for a z probe that is NO, or do all input pins need to be the same (NC or NO)? I would like to use LinuxCNC but will use Mach3 if necessary. a thanks!
It's generally acceptable to use one pin for all of your limit switches wired Normally Closed (NC), and another separate pin for a Z probe that is Normally Open (NO). LinuxCNC is quite flexible and allows for mixed configurations of NC and NO switches.

Just ensure you configure LinuxCNC correctly to recognize each pin's logic (Active low or active high). And perhaps run a few tests before running the machine.

Additional Information:
It's generally acceptable to use one pin for all of your limit switches wired Normally Closed (NC), and another separate pin for a Z probe that is Normally Open (NO). LinuxCNC is quite flexible and allows for mixed configurations of NC and NO switches.

Just ensure you configure LinuxCNC correctly to recognize each pin's logic (Active low or active high). And perhaps run a few tests before running the machine.
Click the link to add information to this solution:
[59] is it ok to use one pin for all of the limit switches wired NC and another pin for a z probe that is NO, or do all input pins need to be the same (NC or NO)? I would like to use LinuxCNC but will use Mach3 if necessary. a thanks!
BUILDING ONE OF YOUR GREENBULL 6X LONG AND 2.2 KILOWATT SPINDLE DOES NOT FIT. SEEMS LEAD SCREW YOU SENT WITH KIT IS SHORT 42" LOOKS LIKE IT NEEDS TO BE 5 OR 6 INCH LONGER. THIS CORRECT? WHAT THE NEEDED LENGTH FOR UNIT?
The leadscrew length for the greenBull long Z-axis is 47 inches.

Additional Information:
Click the link to add information to this solution:
BUILDING ONE OF YOUR GREENBULL 6X LONG AND 2.2 KILOWATT SPINDLE DOES NOT FIT. SEEMS LEAD SCREW YOU SENT WITH KIT IS SHORT 42" LOOKS LIKE IT NEEDS TO BE 5 OR 6 INCH LONGER. THIS CORRECT? WHAT THE NEEDED LENGTH FOR UNIT?
I'm not sure of ALL the things I will need to do some of my ideas for the cnc machine. I'll mostly be cutting out 3/4" plywood projects. How much minimum for a 5' by 10' system? I need the hardware and software to get the job done. I saw the price for your basic unit 3-4 grand but don't know what all I NEED to start work.
The 5x10 greenBull base kit comes with the structure, hardware, and electronics for motion control. In order to have a fully functional CNC you will need a table base for your machine, a spindle or router to handle your cutting applications, end mills (bits) for cutting, CAD, CAM and CNC software, and a computer. There are also accessories you can add such as limit switches, emergency stops, and cable carrier for cable management. If you are looking for more information or a formal quote please contact sales@buildyoucnc.com
Click the link to add information to this solution:
I'm not sure of ALL the things I will need to do some of my ideas for the cnc machine. I'll mostly be cutting out 3/4" plywood projects. How much minimum for a 5' by 10' system? I need the hardware and software to get the job done. I saw the price for your basic unit 3-4 grand but don't know what all I NEED to start work.
if i purchase the 4 Axis Electronic Combos and the Combo #1 with hardware, plans and DVD what else do i need to have a complete cnc machine
Other items you will need if you are purchasing the electronic combo (motors, drivers, power supply and computer interface) and the hardware and plans kit:

You will need the wood to create the structure of the machine. You will need a router to serve as the cutting instrument. You will need a computer to control the machine and the software that will serve as the control program. You will also need lead screws and rails (aluminum angles). If you intend to have faster travel than 20 ipm, we recommend purchasing the 5 start lead screws so you can achieve up to 300 ipm. https://www.buildyourcnc.com/item/mechanical-leadscrews-leadnuts-!5-5-starts-10-tpi
Click the link to add information to this solution:
if i purchase the 4 Axis Electronic Combos and the Combo #1 with hardware, plans and DVD what else do i need to have a complete cnc machine
hi, would like to make a change on my order, i purchase this part 2.2kW Spindle with 220V Inverter $528.00, and would like to make it for 110 volts instead of 220v. please
Sure, not a problem at all. You will need to call our office and provide your information so that we can change the correct order.

Our phone number can be seen by hovering over the "Need Help?" at the top right of each page.
Click the link to add information to this solution:
hi, would like to make a change on my order, i purchase this part 2.2kW Spindle with 220V Inverter $528.00, and would like to make it for 110 volts instead of 220v. please
Since you don't sell the hardware only package for the Blackfoot 4'x8' can you tell me what items I should look for for the chain sprockets, spacers to mount them to the 1/2" rod, and chain? All the other parts I can source from elsewhere
I'm not sure I understand the question. You are looking for spacers or sprockets?

Additional Information:
Nevermind, I found my answer. Thank you
Click the link to add information to this solution:
Since you don't sell the hardware only package for the Blackfoot 4'x8' can you tell me what items I should look for for the chain sprockets, spacers to mount them to the 1/2" rod, and chain? All the other parts I can source from elsewhere
I have the 2.2KW VFD. I would like to have it controlled through software. What are the Mode parameters that need to be changed that will allow FWD/ REV, START/STOP and RPM control?
What controller are you using to control the cnc machine (Mach3 usb, parallel breakout board, etc.)?

The spindle VFD has an input for 0-10 volts to control the speed and can be used with the MAch3 USB or the Pokeys57CNC board. There are also other terminals in the VFD to control the forwared/reverse and start and stop. Mach3 has parameters to control these output and you need to specify which pins are used for these.

You can also use the TX/RX RS-485 connection on the VFD to have total control using an FTDI USB to serial connector board to connect the computer directly to the VFD.

How to connect the USB to Serial adapter to the VFD:
https://www.buildyourcnc.com/FAQ/13790

FTDI USB to Serial:
https://www.buildyourcnc.com/item/Interfaces-newbiehack-Interfaces-TTL232R-USB-UART-Serial

Pokeys57CNC board:
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board

Mach3 USB board:
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

Parallel Breakout board:
https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

Additional Information:
I do apologize for leaving out the parts list.
Leadshine MX4660 4-Axis Digital Stepper Motor Driver
Ethernet SmoothStepper
YL600-2S-2K20 VFD
4 Relay control board
Has anyone had any success getting Mach3 to control the spindle speed and direction?
Click the link to add information to this solution:
I have the 2.2KW VFD. I would like to have it controlled through software. What are the Mode parameters that need to be changed that will allow FWD/ REV, START/STOP and RPM control?
I have an Advantage Router 600 table, the control system seems to have gone out or died, would like options on upgrading the control system to be able to use the router again.
Please send an email to sales@buildyourcnc.com outlining your requirements and we will be happy to discuss the various ways to meet them.
Click the link to add information to this solution:
I have an Advantage Router 600 table, the control system seems to have gone out or died, would like options on upgrading the control system to be able to use the router again.
Board does not work for Z and A axis. Have swapped motors and drivers with no change. Note: When received package contained another package within (apparent return??). Request Return Authorization. Kevin Dawson
We send out only new products, so I'm not sure why that happened. To get an RMA, just ma the part back to us with a note of the issue and your name and address.

Send the package to
32624 SummerGlade Dr.
Wesley Chapel, FL 33545
Click the link to add information to this solution:
Board does not work for Z and A axis. Have swapped motors and drivers with no change. Note: When received package contained another package within (apparent return??). Request Return Authorization. Kevin Dawson
I HAVE A SIGN SHOP AND WE NEED CUT ALUMINUM, PLEXIGASS, FOAM AND OTHER MATERIALS FOR SIGNS. CAN YOU TELL ME WHAT MACHINE WE NEED? I LOOKING 4'X8' OR 5' X 10'
The overall size of the machine, really depends on both the area available to you and also the overall size of material being used. Now our larger machines (blackFoot, greenBull, greenLean) can cut all the materials mentioned above, and if equipped with our 2.2kW spindle you will be accurate up to ten thousandths of an inch.
Our greenBull machine does have an option for a long-z axis, that was especially designed to cut foam, but depending on the overall size it might not be a requirement for the specified request.
Click the link to add information to this solution:
I HAVE A SIGN SHOP AND WE NEED CUT ALUMINUM, PLEXIGASS, FOAM AND OTHER MATERIALS FOR SIGNS. CAN YOU TELL ME WHAT MACHINE WE NEED? I LOOKING 4'X8' OR 5' X 10'
I am interested in purchasing the Green Lean complete kit and also buy the ArtCamPro what other software will I need to up and running?
If you were to buy all of that, only thing you'll need is the mach3 software to run the machine.
Click the link to add information to this solution:
I am interested in purchasing the Green Lean complete kit and also buy the ArtCamPro what other software will I need to up and running?
If I purchase the [blackToe 2x4 v4.1 CNC Machine Kit - USB Electronics - Table Included] all I would need for this CNC to be fully operational is a laptop with mach 3 software and a router. Is this correct?
if you purchased the USB interface, you will need planet-cnc software rather than Mach3, and you will need a usb cable to connect the usb interface to the computer.

The blackToe 2x4 CNC Machine Kit with optional table will need wire to connect the electronics. Don't forget to get some end mills to use for cutting the intended material.

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
If I purchase the [blackToe 2x4 v4.1 CNC Machine Kit - USB Electronics - Table Included] all I would need for this CNC to be fully operational is a laptop with mach 3 software and a router. Is this correct?
Hello. I like your vertikal router. Is then router stabil enogh for the need of a Carpenter? Are you using 21mm Plywood or 21mm MDF. What type of spindel (KW) is maximum allowed and whatbis the maximum feed (6mm cutter) in oak. Thank you, Veit
The greenLean vertical CNC is stable enough to handle large-scale production on a daily basis. We use 3/4" MDO plywood, which is equivalent to about 19mm. The gantry is designed to hold a 2.2kW Spindle, with a maximum of 24,000 RPM.
Click the link to add information to this solution:
Hello. I like your vertikal router. Is then router stabil enogh for the need of a Carpenter? Are you using 21mm Plywood or 21mm MDF. What type of spindel (KW) is maximum allowed and whatbis the maximum feed (6mm cutter) in oak. Thank you, Veit
Online sending options are very expensive for European customers (~50% of the material cost). Could you tell us the weight and size of the greenLean Vertical CNC Machine Kit, allowing us to find better options ?
We are able to ship internationally but unfortunately we cannot control the shipping costs incurred for international customers. However, if you are associated with educational programs or Makerspaces and/or Fab Labs we do offer certain discounts in some cases. Please send an email to customer service for more information on receiving a quote.
Click the link to add information to this solution:
Online sending options are very expensive for European customers (~50% of the material cost). Could you tell us the weight and size of the greenLean Vertical CNC Machine Kit, allowing us to find better options ?