[ Log In ]
[ Register ]

Question #: 13926

Question: Any Black Friday deals coming up or other deals? Thinking about purchasing a VLXL.

Current Solution

Yes, for the 2017 Black Friday, we will have a sale coming up. The sale will include all assembled machines at a 5% discount.

Additional Information:
So only assembled machines? Awe man. I would really like a discount on the Blacktooth Laser...

Additional Information:
You are preaching to the choir. We are the type of company eager to help makers out there, but our kits just don't have the profit margin to cover a discount.

Respond:

Other Possible Solutions to this Question

  • I am interested in purchasing the Green Lean complete kit and also buy the ArtCamPro what other software will I need to up and running?

    If you were to buy all of that, only thing you'll need is the mach3 software to run the machine.

    Click the link to add information to this solution:
    I am interested in purchasing the Green Lean complete kit and also buy the ArtCamPro what other software will I need to up and running?

  • So there will be no deals on kits (VLXL) coming up?

    The 2017 Black Friday will not include kits unfortunately. The profit margin on those items are not enough for us to be able to cover overhead and payroll if we added a discount.

    Click the link to add information to this solution:
    So there will be no deals on kits (VLXL) coming up?

  • Are there any videos or other sources of information on assembling the greenBull v2?

    The assembly instructions for the greenBull v2 are through an instruction set emailed to the customer that purchased the machine kit.

    Click the link to add information to this solution:
    Are there any videos or other sources of information on assembling the greenBull v2?

  • Are there any other manuals for the VFD that comes with the 2.2kw spindle?

    We have manuals for the VFD rather than the spindles. Can you specify what issue you may be having so we can help you better?

    Additional Information:
    I am having trouble wiring the VFD. (From the wall outlet to the VFD) I think the manual or setup guide on your website is wrong. The two diagrams show two different sets of terminals on the page.

    Also, do you have a video or other documentation on programming the VFD? Your videos and documentation looks like it only covers the 1.2kw version. Are the two different spindles from different manufacturers?

    Click the link to add information to this solution:
    Are there any other manuals for the VFD that comes with the 2.2kw spindle?

  • how to connect USB controller to the drivers. Any instructions/video other then html datasheet?

    The wiring instructions for the USB controller can be found here: https://www.buildyourcnc.com/tutorials/tutorial-Electronics-USB-Interface-Wiring

    Click the link to add information to this solution:
    how to connect USB controller to the drivers. Any instructions/video other then html datasheet?

  • Are there .dxf files or other files for the MDF parts in Combo #1 so that they may be cut using a CNC?

    No, at this time, we do not offer any .dxf or any other type of file to cut the pieces for the DIY Combo #1. Just the directions that you are already able to access with the dimensions in them.

    Additional Information:

    Click the link to add information to this solution:
    Are there .dxf files or other files for the MDF parts in Combo #1 so that they may be cut using a CNC?

  • DO YOU HAVE SPECIAL DEALS FOR HACKERSPACES OR NON-PROFIT ORGANIZATIONS?

    We just don't make enough on our machines to justify any discounts. We try to offer everyone the same low price.

    If I can help in another way, please let me know.

    Click the link to add information to this solution:
    DO YOU HAVE SPECIAL DEALS FOR HACKERSPACES OR NON-PROFIT ORGANIZATIONS?

  • How do I wire the limit switches on the VLXL? Also, where do I place them? You included 2 rotary and two other limit switches.

    You can actually select many places for the switches, depending on where you think your zero will be. I will take pictures of where we positioned our switches. We set the positions so the zero is at the bottom left corner of the machine.

    Additional Information:
    I will take pictures tomorrow.

    Additional Information:
    Thank you. Just want to finish before the holiday.

    Additional Information:
    Not a problem at all and my apologies for not having that information. I have been meaning to put up a video on the limit switch connection as it is somewhat difficult to explain the process in words and diagrams.

    Additional Information:
    Any update?

    Additional Information:
    I plan on driving to the office later today and take pictures.

    Additional Information:
    Thank you. I've just done almost everything else. Just waiting for the grade 3 grease in the mail. Also, where do you suggest connecting the cable carriers? I ran everything through the top but the carrier is getting kind of full. Because of that, it is pushing the belt out when the gantry moves.

    Additional Information:
    I will take pictures of those connections as well.

    Additional Information:
    Much appreciated.

    Additional Information:
    It’s my pleasure.

    Additional Information:
    I’m almost to the office. I’ve been shuttling my kids around today. Sorry for the wait.

    Additional Information:
    I’m adding the images to the end of the VLXL instructions.

    Additional Information:
    The limit switch connections use the NO (Normally Open) terminals. That means that the switch, when not engaged, is normally open (no connection between the com and the NO terminal). When the switch is engaged, then the connection is closed and the NO and COM terminal become connected, making a circuit.

    Additional Information:
    Did you bend the arm on the x switch? Or can you mount it flush with enough give to trigger? Same on both sides?


    Additional Information:
    It does look like it is bent in the picture. No, you do not need to bend the arm of the rotary switch.

    Additional Information:
    We only have the rotary switch on one side.

    Click the link to add information to this solution:
    How do I wire the limit switches on the VLXL? Also, where do I place them? You included 2 rotary and two other limit switches.

  • Hi Do you know if your Mach3 interface board works with any of other of the current CAM programs such as MACH4?

    The Mach3 USB controller only works with Mach3. We have a controller that works with Mach3 and Mach4 called pokeys57CNC controller.
    Here is a link to that controller:
    https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board

    Click the link to add information to this solution:
    Hi Do you know if your Mach3 interface board works with any of other of the current CAM programs such as MACH4?

  • Hi Do you know if your Mach3 interface board works with any of other of the current CAM programs such as MACH4?

    The Mach3 USB controller only works with Mach3. We have a controller that works with Mach3 and Mach4 called pokeys57CNC controller.
    Here is a link to that controller:
    https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board

    Click the link to add information to this solution:
    Hi Do you know if your Mach3 interface board works with any of other of the current CAM programs such as MACH4?

  • Purchasing and shipping a kit internationally would make the price prohibitive. Are the dxf files available on their own so that the parts can be machined locally?

    The files and hardware option for our machines has been removed from the site due to the following reasons:
    Difficulty for the end use of the files and the challenges (and time/money) on our side to assist in using these files.
    The abuse of these files over the internet.
    Ultimately may reduce the sales of machines keeping us in business.
    Sadly, this is what has come out of our company attempting to be open; however, the machines sold on this site is still far lower in price than the competition for the quality that we provide as we have a great desire to engender the cottage industry to fulfill their need for low end manufacturing. My sincere apologies if this causes any inconvenience.

    Additional Information:
    NO, is not possible, I can help with the shipping cost

    Additional Information:

    Click the link to add information to this solution:
    Purchasing and shipping a kit internationally would make the price prohibitive. Are the dxf files available on their own so that the parts can be machined locally?

  • About your HIWIN rails. What Carriage block does the 78" rails come with, 2 flange or 2 with no flange?

    The HIWIN rails come with the same flange blocks that are sold individually.

    Click the link to add information to this solution:
    About your HIWIN rails. What Carriage block does the 78" rails come with, 2 flange or 2 with no flange?

  • Hi, I live in Australia and am looking at purchasing the Blacktooth laser cutter and engraver. I am wondering what the cost to ship to Australia would be?

    You can use our shopping cart to determine the shipping. Add the machine and the parts you want to purchase, enter your shipping address and click on the Calculate Shipping Button to get a price for shipping. The shipping charges are determined directly from the carriers at the time of pressing that button.

    Additional Information:



    Additional Information:



    Additional Information:

    Click the link to add information to this solution:
    Hi, I live in Australia and am looking at purchasing the Blacktooth laser cutter and engraver. I am wondering what the cost to ship to Australia would be?

  • DOES THE RADIATION ONLY EXIST WHEN I'M ACTUALLY MAKING A CALL, OR JUST ANY TIME PHONE ON?

    Whenever they are turned on, cell phones communicate at infrequent intervals with a nearby base station even when they are not being used for a call. This is necessary to tell the system where the user is in case a call should come in. Thus, even while they are inactive, the phones are a source of (very low) radiofrequency energy exposure to the user. Hands-free kits reduce exposure to a user by removing the phone from the vicinity of the head. There is no identifiable health benefit in using the kits, but there is no detriment either, and using them may increase a user's peace of mind. Contrary to a widely publicized report by a British magazine last year, the kits are effective in reducing exposure. (This is not necessarily true of other devices that can be bought to be used with phones.) In your case, the cell phone and hands-free kit are clearly an important link to the outside world and I would not hesitate in using them. There may be comfort issues with having the earpiece in place for a long time, but radiofrequency radiation exposure should not be a concern at all. The hands-free kits will reduce exposure below that which you would receive if the phone were kept close to your head. Kenneth R. Foster Professor, Department of Bioengineering

    Click the link to add information to this solution:
    DOES THE RADIATION ONLY EXIST WHEN I'M ACTUALLY MAKING A CALL, OR JUST ANY TIME PHONE ON?

  • Does the VLXL kit come with absolutely everything you need to start up?

    The Vertical Laser XL Laser Cutter comes with everything but the hookup wires and heat shrink for wiring and the tools you will need to assemble the machine and wire the electronics. You will also need a blower/vacuum to evacuate gasses in the cavity of the machine, and a compressor to provide air assist at the nozzle. 4 conductor motor cable is supplied. Water and air tubing is supplied along with the structure, hardware, mechanical parts, electronics, and chiller.

    The wiring will require strippers for insulation removal at the tips and a soldering iron to solder motor wires to them motor cable. Screw drivers and hex wrenches will be needed.

    Assembling this kit is not for the faint of hearts and a ton of patience is necessary. It is a very entailed process that will take a bit of time to complete. If you have any reservations at all, please consider the assembled version.

    Click the link to add information to this solution:
    Does the VLXL kit come with absolutely everything you need to start up?

  • How can i tell if my laser supply is 110 or 230 VAC? there is no marking of any kind

    Only the 110v Version will have any indication of voltage on it. On the side of the power supply unit that has the black terminal strip and red wire coming out of it, there will be a silver sticker on the white side of the transformer that will state 110v, if it is 110v. If there is no sticker, then it should be 220v.

    Additional Information:
    20

    Click the link to add information to this solution:
    How can i tell if my laser supply is 110 or 230 VAC? there is no marking of any kind

  • Do you have a more detailed diagram of the rotary and 15A limit switches on the vlxl?

    Are you trying to determine how to wire the switches or where to place them on the Vertical Laser XL? Let me know and I will provide some pictures or video on how to do this.

    Additional Information:
    Kind of both. Have somewhat of an idea as to how to wire them but you included rotary and other limit switches. Not sure which ones to put where. Never worked with these before.

    Click the link to add information to this solution:
    Do you have a more detailed diagram of the rotary and 15A limit switches on the vlxl?

  • I'm using ArtCam with my Black Toe. What Gcode version do you choose to work with EMC2

    I have not heard of different versions of g-code, but ArtCAM would be able to give you the answer to this question, if their software is specifying that there are different versions.

    Additional Information:
    20

    Click the link to add information to this solution:
    I'm using ArtCam with my Black Toe. What Gcode version do you choose to work with EMC2

  • Can you offer any vouchers for the VLXL?

    We do not offer vouchers for our products or machines.

    Click the link to add information to this solution:
    Can you offer any vouchers for the VLXL?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.