[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 13943

Question: What file types will LaserCAD accept?

Current Solution

LaserCAD and the Anywells Laser Controller used in our BlackTooth and Vertical Laser XL laser cutters and engravers can accept these file types:

.nc (Gcode)
.ai (Adobe Illustrator)
.svg
.pdf (Adobe Acrobat)
.dxf (AutoCAD and Drawing Exchange)
.plt
.dst
.dsb
.uds (UD)
.bmp (Bitmap image)
.gif (Image)
.jpg (Joint Photographers)
.png

Respond:

Other Possible Solutions to this Question

  • What file types will the vertical laser xl accept?

    LaserCAD and the Anywells Laser Controller used in our BlackTooth and Vertical Laser XL laser cutters and engravers can accept these file types:

    .nc (Gcode)
    .ai (Adobe Illustrator)
    .svg
    .pdf (Adobe Acrobat)
    .dxf (AutoCAD and Drawing Exchange)
    .plt
    .dst
    .dsb
    .uds (UD)
    .bmp (Bitmap image)
    .gif (Image)
    .jpg (Joint Photographers)
    .png

    Click the link to respond:
    What file types will the vertical laser xl accept?

  • What file types will the anywells laser controller accept?

    LaserCAD and the Anywells Laser Controller used in our BlackTooth and Vertical Laser XL laser cutters and engravers can accept these file types:

    .nc (Gcode)
    .ai (Adobe Illustrator)
    .svg
    .pdf (Adobe Acrobat)
    .dxf (AutoCAD and Drawing Exchange)
    .plt
    .dst
    .dsb
    .uds (UD)
    .bmp (Bitmap image)
    .gif (Image)
    .jpg (Joint Photographers)
    .png

    Click the link to respond:
    What file types will the anywells laser controller accept?

  • What file types can the blackTooth Laser Cutter accept?

    LaserCAD and the Anywells Laser Controller used in our BlackTooth and Vertical Laser XL laser cutters and engravers can accept these file types:

    .nc (Gcode)
    .ai (Adobe Illustrator)
    .svg
    .pdf (Adobe Acrobat)
    .dxf (AutoCAD and Drawing Exchange)
    .plt
    .dst
    .dsb
    .uds (UD)
    .bmp (Bitmap image)
    .gif (Image)
    .jpg (Joint Photographers)
    .png

    Click the link to respond:
    What file types can the blackTooth Laser Cutter accept?

  • What file types can your laser cutter and engraver accept?

    LaserCAD and the Anywells Laser Controller used in our BlackTooth and Vertical Laser XL laser cutters and engravers can accept these file types:

    .nc (Gcode)
    .ai (Adobe Illustrator)
    .svg
    .pdf (Adobe Acrobat)
    .dxf (AutoCAD and Drawing Exchange)
    .plt
    .dst
    .dsb
    .uds (UD)
    .bmp (Bitmap image)
    .gif (Image)
    .jpg (Joint Photographers)
    .png

    Click the link to respond:
    What file types can your laser cutter and engraver accept?

  • What version of LaserCAD are you supporting now?

    At this time 1/10/2020, we support version 8.10.21. As new versions of LaserCAD are available, we will support the current version.

    Click the link to respond:
    What version of LaserCAD are you supporting now?

  • Does you laser cutter accept dxf file type?

    LaserCAD and the Anywells Laser Controller used in our BlackTooth and Vertical Laser XL laser cutters and engravers can accept these file types:

    .nc (Gcode)
    .ai (Adobe Illustrator)
    .svg
    .pdf (Adobe Acrobat)
    .dxf (AutoCAD and Drawing Exchange)
    .plt
    .dst
    .dsb
    .uds (UD)
    .bmp (Bitmap image)
    .gif (Image)
    .jpg (Joint Photographers)
    .png

    Click the link to respond:
    Does you laser cutter accept dxf file type?

  • What are the acceptable materials that I can cut?

    The machines on this site can cut a wide variety of materials. If there is an end mill (cutting bit) that is available on the market, the machine can cut it. The thickness is only limited by the end mill length. This is possible with these CNC machines and other machines on the market because the machines can be controlled in such a way that the material can be cut using depth per pass, feed rate, and spindle RPM.

    Click the link to respond:
    What are the acceptable materials that I can cut?

  • WHAT NATIONALITY ROBBIE WILLIAMS?

    Robbie Williams is English/British.

    Click the link to respond:
    WHAT NATIONALITY ROBBIE WILLIAMS?

  • Communicating unsuccessful AWC608 LaserCAD

    If you are getting the "Communicating Unsuccessful!" error when you are trying to communicate between LaserCAD and the AWC608 Laser Cutter and Engraver controller (after you have already tried installing the USB driver from the LaserCAD setup procedure), these are the steps you will need for a successful communication:

    - Open the Device Manager window (right click on the start menu and select Device Manager)
    - When you plug the USB cable from the AWC608 Laser Cutter Controller (USB Type B connector) to the computer, you should see a new item in the Device Manager, possibly under "Ports (COM & LPT)", or under "Other Devices". It may show as an item under "Other Devices", possibly FT245R and has an "!" in a yellow triangle.
    - Download the latest FTDI drivers from: http://www.ftdichip.com/Drivers/D2XX.htm
    - Unzip the files to a folder that can be easily browsed.
    - Right click on the item that appeared in the Device Manager when the cable was plugged in between the Laser Cutter AWC608 controller and the computer.
    - Click on update driver
    - Select the procedure to manually install the driver and browse to the folder containing the FTDI driver and follow the step in the driver installation wizard.
    - The item should now be located under the "Ports (COM & LPT)" and should be named "USB Serial Device (COM#)". The # will be the number you will use in the LaserCAD software.
    - In the LaserCAD software, click the "Select Mode" at the far top right of the Laser CAD user interface.
    - Make sure USB mode is selected.
    - If the Machine name with the correct COM number is listed, select it and exit the dialog window. Otherwise, click on "Add" and fill in the details with the new COM number.

    Additional Information:


    Additional Information:
    Communicating unsuccessful

    Additional Information:
    Communicating unsuccessful

    Click the link to respond:
    Communicating unsuccessful AWC608 LaserCAD

  • What profile do I use in VCarve for a BlackToe?

    The blackToe is a CNC Router based on standard CNC Routing and milling actions. If you are referring to a profile machining operation (where the path follows the inside or outside edge of a polygon, line, arc or circle) then the profile is actually more a function what you want the CNC router (blackToe in this case) to do. A profile expects a specific end mill in the spindle and requires the specifications of the end mill in the profile operation.

    If you are referring to profile to mean "post processor" or specifications (profile of the control) for the g-code interpretation for a specific control program (like Mach3), then you will need to set the post processor in VCarve post-processor to the control program you are using.

    Please provide more specific information here so I can delve in a bit deeper.

    Click the link to respond:
    What profile do I use in VCarve for a BlackToe?

  • LaserCAD AWC608 USB Communicating Unsuccessful.

    If you are getting the "Communicating Unsuccessful!" error when you are trying to communicate between LaserCAD and the AWC608 Laser Cutter and Engraver controller (after you have already tried installing the USB driver from the LaserCAD setup procedure), these are the steps you will need for a successful communication:

    - Open the Device Manager window (right click on the start menu and select Device Manager)
    - When you plug the USB cable from the AWC608 Laser Cutter Controller (USB Type B connector) to the computer, you should see a new item in the Device Manager, possibly under "Ports (COM & LPT)", or under "Other Devices". It may show as an item under "Other Devices", possibly FT245R and has an "!" in a yellow triangle.
    - Download the latest FTDI drivers from: http://www.ftdichip.com/Drivers/D2XX.htm
    - Unzip the files to a folder that can be easily browsed.
    - Right click on the item that appeared in the Device Manager when the cable was plugged in between the Laser Cutter AWC608 controller and the computer.
    - Click on update driver
    - Select the procedure to manually install the driver and browse to the folder containing the FTDI driver and follow the step in the driver installation wizard.
    - The item should now be located under the "Ports (COM & LPT)" and should be named "USB Serial Device (COM#)". The # will be the number you will use in the LaserCAD software.
    - In the LaserCAD software, click the "Select Mode" at the far top right of the Laser CAD user interface.
    - Make sure USB mode is selected.
    - If the Machine name with the correct COM number is listed, select it and exit the dialog window. Otherwise, click on "Add" and fill in the details with the new COM number.

    Additional Information:


    Additional Information:
    Communicating unsuccessful

    Additional Information:
    Communicating unsuccessful

    Click the link to respond:
    LaserCAD AWC608 USB Communicating Unsuccessful.

  • Lasercad resolution ppi

    The resolution of PPI (Pulses Per Inch or Pulses/Inch) for any laser is the velocity (feedrate) of the machine's head and the number of pulses that are generated during this process. Therefore, any number of PPI resolution can be achieved, so you have many options. The slower the feedrate and higher the pulses per second will yield a high PPI. Fast feedrate with low pulses per second will yield low PPI.

    Additional Information:

    Click the link to respond:
    Lasercad resolution ppi

  • WHAT ARE THE BEST FOODS THAT WILL HELP YOU LOSE WEIGHT?

    Lettuce, or any vegetable. Also drink a cup of water before meals, it'll make you feel fuller.

    Click the link to respond:
    WHAT ARE THE BEST FOODS THAT WILL HELP YOU LOSE WEIGHT?

  • What determines how fast the stepping motors will spin?

    The amount of voltage that is used to power the motors will generally determine the top RPM of the stepping motors. As you increase the voltage, the time constant is reduced in the process of current flowing through the coils of the motor. The faster the current can be drawn through the coils, the faster the motor will spin.

    Click the link to respond:
    What determines how fast the stepping motors will spin?

  • Besides the blackfoot what else will I need to purchase.

    PC with parallel port and USB port
    20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
    18awg stranded wires for power supply to drivers
    24awg stranded wires for breakout board to drivers
    (location and spacing of components varies from one person to another, so we do not provide cables/wires)
    - General purpose extension cord (cut the female end off) to provide power to power supply
    - USB cable to power breakout board
    - Parallel cable to communicate to breakout board
    - Router
    - (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
    - (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
    - End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
    - CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
    - CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx
    - If the machine does not have the table included, then a table will need to be built. The rails, chain and chain mounts are included that are used on this table.

    Click the link to respond:
    Besides the blackfoot what else will I need to purchase.

  • Will Planet CNC software run nc files created in CamBam?

    Planet-CNC's software is tested functional with CAMBAM according to their website, so this should be possible.

    Click the link to respond:
    Will Planet CNC software run nc files created in CamBam?

  • My computer does not communicate with AWC608 and LaserCAD

    If you are getting the "Communicating Unsuccessful!" error when you are trying to communicate between LaserCAD and the AWC608 Laser Cutter and Engraver controller (after you have already tried installing the USB driver from the LaserCAD setup procedure), these are the steps you will need for a successful communication:

    - Open the Device Manager window (right click on the start menu and select Device Manager)
    - When you plug the USB cable from the AWC608 Laser Cutter Controller (USB Type B connector) to the computer, you should see a new item in the Device Manager, possibly under "Ports (COM & LPT)", or under "Other Devices". It may show as an item under "Other Devices", possibly FT245R and has an "!" in a yellow triangle.
    - Download the latest FTDI drivers from: http://www.ftdichip.com/Drivers/D2XX.htm
    - Unzip the files to a folder that can be easily browsed.
    - Right click on the item that appeared in the Device Manager when the cable was plugged in between the Laser Cutter AWC608 controller and the computer.
    - Click on update driver
    - Select the procedure to manually install the driver and browse to the folder containing the FTDI driver and follow the step in the driver installation wizard.
    - The item should now be located under the "Ports (COM & LPT)" and should be named "USB Serial Device (COM#)". The # will be the number you will use in the LaserCAD software.
    - In the LaserCAD software, click the "Select Mode" at the far top right of the Laser CAD user interface.
    - Make sure USB mode is selected.
    - If the Machine name with the correct COM number is listed, select it and exit the dialog window. Otherwise, click on "Add" and fill in the details with the new COM number.

    Additional Information:


    Additional Information:
    Communicating unsuccessful

    Additional Information:
    Communicating unsuccessful

    Click the link to respond:
    My computer does not communicate with AWC608 and LaserCAD

  • Will you guys ship to the UK & what is the estimated time?

    You can determine if the country is serviceable by:
    - selecting the items you want to purchase on the website
    - go to the cart (shopping cart top left of any webpage)
    - log in, or register
    - Enter the address and click on calculate shipping.

    The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

    The shipping times are determined by the service you select in the shopping cart. If a machine is purchased, we generally have a one week lead time unless otherwise stated in the description of the machine's product page.

    Click the link to respond:
    Will you guys ship to the UK & what is the estimated time?

  • Are the Dust Shoe DXF files available and if not will they

    Do you have one of our machines?

    Additional Information:
    Yes I have a Blackfoot 4.1 ver. 4'x8' cut area. By the way I love it.

    Click the link to respond:
    Are the Dust Shoe DXF files available and if not will they