I can't think of any reason that it would be dangerous. However, I checked with the Cellular Telecommunications Industry Association. The Chairman of the Association sent the following memo on 18 June 1999, to the Associations' Board of Directors and others:
"You may have received inquiries about wireless phones causing fires or explosions at gas stations. In particular, you may have been asked about an alleged explosion at a gas station in Indonesia. We have been unable to verify any such occurrence in Indonesia or anywhere else. Moreover, in our discussions with Shell Oil they have stated they have attempted to verify these reports and also have not been able to document any such occurrence."
Nonetheless, in an abundance of caution, some manufacturers have included language in the owner's manuals for their products that recommends wireless phone users turn off their phones while at refueling points (gas stations). In addition, we have received information that Exxon will begin issuing warning signs at all domestic gas stations advising drivers to turn off all wireless communications devices when entering Exxon gas stations.

While wireless phone owners should always consult their owner's manual for information on the use of the phone, we are not aware of any incident that would justify these concerns."

Gen Roessler, Editor
HPS website

Click the link to add information to this solution:
IS IT DANGEROUS TO USE YOUR CELL PHONE AT A GAS STATION?

A cell phone emits electromagnetic radiation of various frequencies at very low intensity and would not affect the development of a fetus whose mother placed the cell phone on her abdomen during her pregnancy. The mother's reproductive and developmental risk for her growing embryo would not be altered by these exposures. If you are healthy, young, and have no reproductive problems or family history of reproductive or developmental problems, your risk for birth defects is 3% and for miscarriage, 15%. These are background risks with which every woman begins her pregnancy. Neither you nor I can change these risks. Good luck with your pregnancy.

Robert Brent, MD, PhD

Click the link to add information to this solution:
DOES CELL PHONE VIBRATION ON YOUR STOMACH DURING PREGNANCY AFFECT THE BABY?

I can't think of any reason that it would be dangerous. However, I checked with the Cellular Telecommunications Industry Association. The Chairman of the Association sent the following memo on 18 June 1999, to the Associations' Board of Directors and others:
"You may have received inquiries about wireless phones causing fires or explosions at gas stations. In particular, you may have been asked about an alleged explosion at a gas station in Indonesia. We have been unable to verify any such occurrence in Indonesia or anywhere else. Moreover, in our discussions with Shell Oil they have stated they have attempted to verify these reports and also have not been able to document any such occurrence."
Nonetheless, in an abundance of caution, some manufacturers have included language in the owner's manuals for their products that recommends wireless phone users turn off their phones while at refueling points (gas stations). In addition, we have received information that Exxon will begin issuing warning signs at all domestic gas stations advising drivers to turn off all wireless communications devices when entering Exxon gas stations.

While wireless phone owners should always consult their owner's manual for information on the use of the phone, we are not aware of any incident that would justify these concerns."

Gen Roessler, Editor
HPS website

Click the link to add information to this solution:
WHY IT DANGEROUS TO HAVE YOUR MOBILE PHONE IN OPERATION DURING REFUELING AT A GAS STATION?

Cellular phones are designed to be safe for both the user and anyone standing nearby. Cellular phones are actually small radios that transmit signals to and from base-station antennas located on towers or buildings in the nearby neighborhood. Cellular phones use low-power radio signals, even weaker than CB, police, or fire radios.

The American National Standards Institute (ANSI) sets safety standards for human exposure to radiofrequency (RF) electromagnetic energy in the United States. Government agencies such as the Federal Communications Commission (FCC), the Occupational Safety and Health Administration (OSHA), and many states recognize and accept the ANSI RF safety standard. Also, the United States standard for RF energy is comparable to those set in other countries.

Cellular phones and cellular-phone base stations have been shown to meet these RF safety standards. Safety standards for RF energy are threshold standards. Threshold standards define the level of RF energy above which there may be health or safety hazards and below which there have been no reported harmful effects. Unlike ionizing radiation, which many people believe to act cumulatively even at small exposure levels, RF energy at low levels is not considered a cumulative hazard. Therefore the consensus of scientific experts in this area is that RF exposure from cellular phones, meeting the threshold levels set in safety standards, is safe for all.

The specific answer to the question is that cellular phone technology is safe for all. There is no danger posed by either handheld phone units or by base-station antennas. In both cases, the radio signals transmitted from the antennas are required to meet the ANSI safety standard for RF safety as embodied in FCC regulations governing this technology. For more information:

The FCC has recently revised and reissued its Bulletin 56 on Questions and Answers about Biological Effects and Potential Hazards of Radiofrequency Electromagnetic Fields.

OSHA provides information and links to more sites on RF safety at its Web page, Radiofrequency/Microwave Radiation.

Gary Zeman, ScD, CHP Lawrence Berkeley National Laboratory

Click the link to add information to this solution:
ARE CELLULAR PHONE HARMFUL?

Hands-free cell phone car microphones have been tested by the manufacturers and meet the current ANSI/IEEE (American National Standards Institute/Institute of Electrical and Electronics Engineers) standards for radiofrequency (RF) safety. These are the same standards that the Federal Communications Commission enforces under the Telecommunications Act of 1996, and they place limits on the specific absorption rate (SAR) of RF energy in the body. Recent inflammatory articles in the British press were not substantiated by testing at ISO-accredited testing facilities at Motorola. Manufacturers of cell phones are required under FCC regulations to assure that their products meet the SAR limits on both hand-held and hands-free units. Further information can be obtained on the Internet at The Center for Devices and Radiological Health (FDA information) or Office of Engineering and Technology (FCC information).

Click the link to add information to this solution:
CELL PHONE USE

Your heart pumps blood.

Click the link to add information to this solution:
WHAT DOES YOUR HEART PUMP?

It is the same machine. However, the one on our site comes with a instructional DVD.

Click the link to add information to this solution:
WHO IS YOUR FATHER

We provide a one year warranty from the date the item is delivered.

Click the link to add information to this solution:
WHAT IS THE WARRANTY ON YOUR PRODUCTS

There are several CAD/CAM programs out there for MacOS. Here is a list of a few: http://www.macuser.de/forum/f53/3d-2d-cad-395058/#post4499316
I've also read good things about punchCAD: http://www.punchcad.com/
Of course, there is always SketchUp if you are in a pinch. There are a few CAM plugins for SketchUp as well, but I've never used them, so I can't vouch for them.

CAD/CAM will get you as far as designing your parts and producing the g-code, but if you also want to run the CNC machine with your Mac, you will need a piece of software similar to Mach3 or EMC to run the g-code. I haven't been able to find anything like these programs that runs on Mac, so you may have to run Mach3 or EMC in Windows using Boot Camp or a virtual machine such as VMware or Parallels.

Personally, I would use the Mac to do all the CAD/CAM, then use a cheap PC to run the CNC machine.

Additional Information:


Additional Information:
EasyDNC for OSX
www.dnc-x.com

Additional Information:


Additional Information:
Hi guys I’m new to the cnc and I’m beginning to learn how to operate and cad-cam software also my cnc runs on Mach3 my questions is if I should use MacBook to do all designs if I can have all this software to run on Mac or I have to use windows software to operate it? I have separate small computer connected to the cnc table who have Mach3 on it please help. Also if you know any other software much easy for beginners please let me know thank you guys!
My email if needed is r1jastrzebski@gmail.com

Additional Information:


Additional Information:
Hi , thank you for your advise!

Additional Information:
Hi , thank you for your advise!

Additional Information:
Hi , thank you for your advise!

Additional Information:
Hi , thank you for your advise!

Additional Information:

Click the link to add information to this solution:
YOUR CNC SOFTWARE COMPATIBLE WITH MAC?

There is very little radiofrequency (RF) energy exposure to people inside a building from a cellular base station located on its roof. There are several reasons for this. First, the transmitters operate at low power levels. Second, the antennas are normally mounted near the edges of the roof and are aimed away from the building. Third, most cellular transmitters use "high gain" or panel antennas. Such antennas transmit most of their energy in a narrow beam (in the vertical direction) from their front surfaces, away from the building. They radiate very little energy downwards towards the roof or backwards from their rear surfaces. Finally, building materials absorb a significant fraction of the RF energy passing through them. As a result, the RF signal levels at any location inside the building are invariably low and far below safety limits. The situation might be different in some locations on the roof itself. RF signal levels close to (within a few feet) and directly in front of cellular base station antennas can easily exceed safety limits. Some precautions are needed to prevent people from walking directly in front of the antennas while they are transmitting. This applies also to paging and other systems that use rooftop antennas, some of which transmit at higher power levels than many cellular base stations. Kenneth R. Foster, Ph.D.

Click the link to add information to this solution:
WHAT ARE THE HEALTH RISKS OF LIVING NEAR A CELL PHONE TOWER?

Yes, all of the software we sell on this website will work on windows 10.

Additional Information:
I have a usb controller with JP-3163B 3.9 V is it able to work with mach 4 and windows 10

Click the link to add information to this solution:
will any of your software work with Windows 10

The tolerance of our 1/2" 5 start lead screw is +/-0.05mm

Click the link to add information to this solution:
What is the tolerance on your 1/2" acme thread?

Yes, we sell collets for the porter cable 892

http://www.buildyourcnc.com/collets.aspx

http://www.buildyourcnc.com/item/router-colletnut-router-collet-nut
http://www.buildyourcnc.com/item/router-collet-er20-router-complete-collet-kit
http://www.buildyourcnc.com/item/router-collet-!5-er20-router-collet
http://www.buildyourcnc.com/item/router-collet-!25-er20-router-collet
http://www.buildyourcnc.com/item/router-collet-!125-er20-router-collet

Click the link to add information to this solution:
WE HAVE PORTER CABLE 892, WILL YOUR COLLETS FIT?

The collet in the 1.5 kW spindle is an ER-11 and cannot reach the 1/2" size. I would consider the 2.2 kW spindle instead.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
WHAT SIZE COLLET IS IN YOUR 1.5 KILOWATT SPINDLE?

Yes, our 2.2kW water cooled spindles can accept the 1/2" collet size.

Click the link to add information to this solution:
Can your water cooled spindles accept 1/2" collets?

No. In general, registration is voluntary. Copyright exists from the moment the work is created. You will have to register, however, if you wish to bring a lawsuit for infringement of a U.S. work.

Click the link to add information to this solution:
DO I HAVE TO REGISTER WITH YOUR OFFICE BE PROTECTED?

Tinnitus . Learn to love it. No really you should see a doctor. Make sure. White noise will help you sleep when it gets loud.

Additional Information:
I learned, too late, that if a sudden loud event causes tinnitus, see an audiologist IMMEDIATELY. They can do something about it if addressed within a day or so.

Wear hearing protection...always. Loud noises trigger my tinnitus, and headphones and ear plugs (when out & about or at the movies, subway, etc) help tremendously. Mine are rated 33dB.

Click the link to add information to this solution:
WHAT CAUSES RINGING IN YOUR EAR AND HOW CAN YOU STOP IT?

Limit switches are not really needed for this level of a machine, but if you do want to use them, then you will need to connect them with shielded cable and ground the shield at both ends and any other non-used wire in the cable. Limit switches are very susceptible to the motor interference. You will also need to adjust the debounce in the software you will use.

Click the link to add information to this solution:
DO NEED LIMIT SWITCHES, IF SO WHAT IS YOUR RECOMMENDATION?

Can you add more information. I am not familiar with LCD and -1 as serial number.

Click the link to add information to this solution:
Device states serial number is -1. I did the LCD bridging from 1 to 3 and it will not allow me to recover it.