do we offer any military discounts?

Question #: 150

Question: do we offer any military discounts?

Current Solution

We do not offer any military discounts.

Respond:

Other Possible Solutions to this Question

DO WE HELP ANYONE DIDN'T PURCHASE FROM US?
This will depend on a case by case situation. Nonetheless, we can't offer any technical support for other's product because we are not familiar with how it works.
Click the link to add information to this solution:
DO WE HELP ANYONE DIDN'T PURCHASE FROM US?
HOW DO DETERMINE THE STEPS PER INCH
blueChick:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackToe:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackFoot:

X-axis
“CW8060 (6.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

greenBull:

X-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110
Mach3 Motor Tuning: 914.29 steps/in

Z-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/4 Microstep
Dipswitches: 01100100
Mach3 Motor Tuning: 1600 steps/in

Scratch-Build / Book-Build Kit:

X-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 1600 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Additional Information:

Additional Information:
Scratch built/book CNC with NEMA 34 motors and CW8060 microstep driver

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
L8NiICEm

Additional Information:
-1 OR 2+427-427-1=0+0+0+1 --

Additional Information:
-1 OR 2+145-145-1=0+0+0+1

Additional Information:
-1' OR 2+101-101-1=0+0+0+1 --

Additional Information:
-1' OR 2+739-739-1=0+0+0+1 or 'kXOzulhF'='

Additional Information:
-1" OR 2+194-194-1=0+0+0+1 --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
TO93cbNY

Additional Information:
-1 OR 2+824-824-1=0+0+0+1 --

Additional Information:
-1 OR 2+681-681-1=0+0+0+1

Additional Information:
-1' OR 2+805-805-1=0+0+0+1 --

Additional Information:
-1' OR 2+93-93-1=0+0+0+1 or 'MpFdFb3O'='

Additional Information:
-1" OR 2+275-275-1=0+0+0+1 --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
-1); waitfor delay '0:0:7' --

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
0"XOR(if(now()=sysdate(),sleep(9),0))XOR"Z

Additional Information:
2k2XS4cL'; waitfor delay '0:0:15' --

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:
g7NWXuig'); waitfor delay '0:0:15' --

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
XoN629J2')); waitfor delay '0:0:15' --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
-5 OR 247=(SELECT 247 FROM PG_SLEEP(15))--

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
-5) OR 122=(SELECT 122 FROM PG_SLEEP(15))--

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
-1)) OR 455=(SELECT 455 FROM PG_SLEEP(15))--

Additional Information:
o1WPxXu4'; waitfor delay '0:0:15' --

Additional Information:
X3pq07N4' OR 218=(SELECT 218 FROM PG_SLEEP(15))--

Additional Information:
i2jhQp7d'); waitfor delay '0:0:15' --

Additional Information:
xMv7x4te') OR 71=(SELECT 71 FROM PG_SLEEP(15))--

Additional Information:
IbKvmZZx')); waitfor delay '0:0:15' --

Additional Information:
YkhmkP9W')) OR 826=(SELECT 826 FROM PG_SLEEP(15))--

Additional Information:
-5 OR 539=(SELECT 539 FROM PG_SLEEP(15))--

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:
-5) OR 160=(SELECT 160 FROM PG_SLEEP(15))--

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1��%2527%2522

Additional Information:
@@EQr47

Additional Information:
-1)) OR 220=(SELECT 220 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
-1)) OR 266=(SELECT 266 FROM PG_SLEEP(9))--

Additional Information:

Additional Information:
-1)) OR 107=(SELECT 107 FROM PG_SLEEP(0))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
vL4vUHTG' OR 262=(SELECT 262 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
gGLXRSqE' OR 938=(SELECT 938 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
WT10Ii3x' OR 598=(SELECT 598 FROM PG_SLEEP(9))--

Additional Information:

Additional Information:
QUuBKFso') OR 152=(SELECT 152 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
nI56G5Pp')) OR 493=(SELECT 493 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1��%2527%2522

Additional Information:
@@nxzWO

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
vJlQYk5k

Additional Information:
-1 OR 2+406-406-1=0+0+0+1 --

Additional Information:
-1 OR 2+236-236-1=0+0+0+1

Additional Information:
-1' OR 2+914-914-1=0+0+0+1 --

Additional Information:
-1' OR 2+282-282-1=0+0+0+1 or '9J7jHjSj'='

Additional Information:
-1" OR 2+210-210-1=0+0+0+1 --

Additional Information:

Additional Information:

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(14),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(0),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:

Additional Information:

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:

Additional Information:
RO4xZyuD'; waitfor delay '0:0:15' --

Additional Information:

Additional Information:
n2HpQRHN'); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
hd4dcDEY')); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
-5 OR 237=(SELECT 237 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
-5) OR 65=(SELECT 65 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
-1)) OR 486=(SELECT 486 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
-1)) OR 399=(SELECT 399 FROM PG_SLEEP(14))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
x4ZvP74B' OR 337=(SELECT 337 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
0VRZpjOv') OR 601=(SELECT 601 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
DrCdekI1')) OR 16=(SELECT 16 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
MQqu0z64')) OR 87=(SELECT 87 FROM PG_SLEEP(7))--

Additional Information:

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1��%2527%2522

Additional Information:
@@HJ5oY

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
HOW DO DETERMINE THE STEPS PER INCH
DO YOU HAVE BLACKTOES WITH TABLES?
Yes, we have the optional table for the blackToe, but we need to fabricate it, which only takes one day. We generally reserve one week for the total fabrication and packing of all parts.
Click the link to add information to this solution:
DO YOU HAVE BLACKTOES WITH TABLES?
WHAT ELSE DO I NEED WITH THE MACHINE?
PC with parallel port and USB port
20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
18awg stranded wires for power supply to drivers
24awg stranded wires for breakout board to drivers
(location and spacing of components varies from one person to another, so we do not provide cables/wires)
- General purpose extension cord (cut the female end off) to provide power to power supply
- USB cable to power breakout board
- Parallel cable to communicate to breakout board
- Router
- (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
- (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
- End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
- CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
- CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx
- If the machine does not have the table included, then a table will need to be built. The rails, chain and chain mounts are included that are used on this table.

Additional Information:
Click the link to add information to this solution:
WHAT ELSE DO I NEED WITH THE MACHINE?
HOW DO I SET UP MY MOTOR DRIVERS?
blueChick:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackToe:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackFoot:

X-axis
“CW8060 (6.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

greenBull:

X-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110
Mach3 Motor Tuning: 914.29 steps/in

Z-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/4 Microstep
Dipswitches: 01100100
Mach3 Motor Tuning: 1600 steps/in
Click the link to add information to this solution:
HOW DO I SET UP MY MOTOR DRIVERS?
HOW DO YOU HOOK UP THE VFD TO SPINDLE?
U - Pin1
V - Pin2
W - Pin3
Pin4 Dead

Additional Information:
My home made cnc is a big problem with my NC connection. When in start my spindle it will be gone wrong. It will be limith switch problem anytime. Need help thanks.

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
HOW DO YOU HOOK UP THE VFD TO SPINDLE?
HOW DO YOU CONNECT THE INVERTER TO AC?
Input to VFD:
240V Active - R
240V Neutral - S
Ground - E

Additional Information:
Click the link to add information to this solution:
HOW DO YOU CONNECT THE INVERTER TO AC?
HOW DO YOU SETUP THE SPINDLE INVERTER?
Change PD001 Source of Run Commands to '1'
Change PD005 Max operating frequency to 400hz
Change PD004 base frequency to 400hz
Change PD003 Main frequency to 400hz
Change PD006 Intermediate frequency to 2.5
Change PD008 max voltage to 220v
Change PD009 Intermediate voltage to 15v
Change PD010 Min voltage to 8
Change PD011 frequency lower limit to >100hz (120hz to start)
Change PD142 7 Amps
Change PD143 2
Change PD144 3000

Note: PD001 had to be changed back to 0 to allow for keypad control.
Note2: I had to reverse U and V to get the spindle to go forward in FWD. (reverse any two wires, u&v or w&v for example)

Additional Information:
Click the link to add information to this solution:
HOW DO YOU SETUP THE SPINDLE INVERTER?
HOW DO I MAKE MY MACHINE SQUARE?
I use a standard large "L" square used in construction. I run gantry up and down with the bit along one side of the square to make the square aligned with the x-axis. I then run the bit along the other edge and if I see space from the edge of the bit to the square, I adjust the gantry square by loosening and tightening the eye bolts that hold the chain at the ends of the table. Repeat as necessary to get the desired square.

Additional Information:
Click the link to add information to this solution:
HOW DO I MAKE MY MACHINE SQUARE?
CAN WE SHIP TO MALAYSIA OR IRAQ?
Yes we can ship to either country. Sometimes we may have to use a particular carrier, which could result in a higher shipping cost.
Click the link to add information to this solution:
CAN WE SHIP TO MALAYSIA OR IRAQ?
WHAT DO I SET FOR MY STEPS PER?
blueChick:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackToe:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackFoot:

X-axis
“CW8060 (6.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

greenBull:

X-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110
Mach3 Motor Tuning: 914.29 steps/in

Z-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/4 Microstep
Dipswitches: 01100100
Mach3 Motor Tuning: 1600 steps/in

Scratch-Build / Book-Build Kit:

X-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 1600 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Additional Information:

Additional Information:
Scratch built/book CNC with NEMA 34 motors and CW8060 microstep driver

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
L8NiICEm

Additional Information:
-1 OR 2+427-427-1=0+0+0+1 --

Additional Information:
-1 OR 2+145-145-1=0+0+0+1

Additional Information:
-1' OR 2+101-101-1=0+0+0+1 --

Additional Information:
-1' OR 2+739-739-1=0+0+0+1 or 'kXOzulhF'='

Additional Information:
-1" OR 2+194-194-1=0+0+0+1 --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
TO93cbNY

Additional Information:
-1 OR 2+824-824-1=0+0+0+1 --

Additional Information:
-1 OR 2+681-681-1=0+0+0+1

Additional Information:
-1' OR 2+805-805-1=0+0+0+1 --

Additional Information:
-1' OR 2+93-93-1=0+0+0+1 or 'MpFdFb3O'='

Additional Information:
-1" OR 2+275-275-1=0+0+0+1 --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
-1); waitfor delay '0:0:7' --

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
0"XOR(if(now()=sysdate(),sleep(9),0))XOR"Z

Additional Information:
2k2XS4cL'; waitfor delay '0:0:15' --

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:
g7NWXuig'); waitfor delay '0:0:15' --

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
XoN629J2')); waitfor delay '0:0:15' --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
-5 OR 247=(SELECT 247 FROM PG_SLEEP(15))--

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
-5) OR 122=(SELECT 122 FROM PG_SLEEP(15))--

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
-1)) OR 455=(SELECT 455 FROM PG_SLEEP(15))--

Additional Information:
o1WPxXu4'; waitfor delay '0:0:15' --

Additional Information:
X3pq07N4' OR 218=(SELECT 218 FROM PG_SLEEP(15))--

Additional Information:
i2jhQp7d'); waitfor delay '0:0:15' --

Additional Information:
xMv7x4te') OR 71=(SELECT 71 FROM PG_SLEEP(15))--

Additional Information:
IbKvmZZx')); waitfor delay '0:0:15' --

Additional Information:
YkhmkP9W')) OR 826=(SELECT 826 FROM PG_SLEEP(15))--

Additional Information:
-5 OR 539=(SELECT 539 FROM PG_SLEEP(15))--

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:
-5) OR 160=(SELECT 160 FROM PG_SLEEP(15))--

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1��%2527%2522

Additional Information:
@@EQr47

Additional Information:
-1)) OR 220=(SELECT 220 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
-1)) OR 266=(SELECT 266 FROM PG_SLEEP(9))--

Additional Information:

Additional Information:
-1)) OR 107=(SELECT 107 FROM PG_SLEEP(0))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
vL4vUHTG' OR 262=(SELECT 262 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
gGLXRSqE' OR 938=(SELECT 938 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
WT10Ii3x' OR 598=(SELECT 598 FROM PG_SLEEP(9))--

Additional Information:

Additional Information:
QUuBKFso') OR 152=(SELECT 152 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
nI56G5Pp')) OR 493=(SELECT 493 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1��%2527%2522

Additional Information:
@@nxzWO

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
vJlQYk5k

Additional Information:
-1 OR 2+406-406-1=0+0+0+1 --

Additional Information:
-1 OR 2+236-236-1=0+0+0+1

Additional Information:
-1' OR 2+914-914-1=0+0+0+1 --

Additional Information:
-1' OR 2+282-282-1=0+0+0+1 or '9J7jHjSj'='

Additional Information:
-1" OR 2+210-210-1=0+0+0+1 --

Additional Information:

Additional Information:

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(14),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(0),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:

Additional Information:

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:

Additional Information:
RO4xZyuD'; waitfor delay '0:0:15' --

Additional Information:

Additional Information:
n2HpQRHN'); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
hd4dcDEY')); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
-5 OR 237=(SELECT 237 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
-5) OR 65=(SELECT 65 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
-1)) OR 486=(SELECT 486 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
-1)) OR 399=(SELECT 399 FROM PG_SLEEP(14))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
x4ZvP74B' OR 337=(SELECT 337 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
0VRZpjOv') OR 601=(SELECT 601 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
DrCdekI1')) OR 16=(SELECT 16 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
MQqu0z64')) OR 87=(SELECT 87 FROM PG_SLEEP(7))--

Additional Information:

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1��%2527%2522

Additional Information:
@@HJ5oY

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
WHAT DO I SET FOR MY STEPS PER?
DO NEED FAN FOR THE ELECTRONICS
This will depend on your use. If you use the cnc all day every day, then I would recommend a fan. With the heat sinks exposed, they should do just fine.
Click the link to add information to this solution:
DO NEED FAN FOR THE ELECTRONICS
HOW DO I SET THE DIP SWITCHES?
blueChick:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackToe:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackFoot:

X-axis
“CW8060 (6.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

greenBull:

X-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110
Mach3 Motor Tuning: 914.29 steps/in

Z-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/4 Microstep
Dipswitches: 01100100
Mach3 Motor Tuning: 1600 steps/in

Additional Information:
Click the link to add information to this solution:
HOW DO I SET THE DIP SWITCHES?
HOW DO I CALIBRATE MY MACHINE?
In Mach3, go to the Settings Tab, and select "Set Steps Per Unit". It will ask you how far to move the machine. Before you do this, make a mark on the table exactly where the end mill is resting. You can do this by lowering the end mill until it touches the material, then spinning it by hand to cut a small dimple in the material. Then, raise the end mill to clear the material, and assign a distance to move the machine. Once the machine moves and stops, measure the exact distance that it actually traveled with a tape measure, and enter this value into the dialog box that asks how far it moved. Mach3 will automatically adjust your steps per unit for that axis to be more accurate. Do this for all axes often to ensure you are cutting accurately. The longer distances you use calibrate, and the more precise you are with your measurements, the better.
Click the link to add information to this solution:
HOW DO I CALIBRATE MY MACHINE?
DO I HAVE TO A PARALLEL PORT?
If your computer does not have a parallel port, all you will need is a low cost PCI parallel adapter card (these can be found on amazon for $15-$20). If you plan on using a laptop (not recommended) you can try to find a PCMCIA parallel adapter, but many people have frequent issues with this setup. A more expensive solution would be to purchase a USB smooth stepper board. Unfortunately, we do not supply any of these adapters and cannot attest to their reliability.

Additional Information:
ur gay

Additional Information:
Click the link to add information to this solution:
DO I HAVE TO A PARALLEL PORT?
HOW DO I SQUARE MY CNC MACHINE OR GANTRY?
I use a standard large "L" square used in construction. I run gantry up and down with the bit along one side of the square to make the square aligned with the x-axis. I then run the bit along the other edge and if I see space from the edge of the bit to the square, I adjust the gantry square by loosening and tightening the eye bolts that hold the chain at the ends of the table. Repeat as necessary to get the desired square.

Additional Information:
Click the link to add information to this solution:
HOW DO I SQUARE MY CNC MACHINE OR GANTRY?
THESE MACHINES ARE DANGEROUS, WHAT DO DO?
These machines are inherently dangerous. Before the machine moves, the machine should be clear of any person by a dimension of at the distance of a persons reach plus a few more feet. This is the policies we institute in our shop and what is recommend to all of our customers. Treat these machines as you would treat any major power tool in the shop.

With that said, you can certainly add some protective parts, but still keep folks away even with those installed. I would use the gantry side to do all of the mounting of the protective parts. Consider using sheet metal that you can bend and make a simple installation right on the gantry side.

Additional Information:

Additional Information:
Click the link to add information to this solution:
THESE MACHINES ARE DANGEROUS, WHAT DO DO?
HOW DO YOU SETUP THE SPINDLE INVERTER VFD?
Change PD001 Source of Run Commands to '1'
Change PD005 Max operating frequency to 400hz
Change PD004 base frequency to 400hz
Change PD003 Main frequency to 400hz
Change PD006 Intermediate frequency to 2.5
Change PD008 max voltage to 220v
Change PD009 Intermediate voltage to 15v
Change PD010 Min voltage to 8
Change PD011 frequency lower limit to >100hz (120hz to start)
Change PD142 7 Amps
Change PD143 2
Change PD144 3000

Note: PD001 had to be changed back to 0 to allow for keypad control.
Note2: I had to reverse U and V to get the spindle to go forward in FWD. (reverse any two wires, u&v or w&v for example)

Additional Information:
Click the link to add information to this solution:
HOW DO YOU SETUP THE SPINDLE INVERTER VFD?
HOW DO I CALIBRATE IN MACH3?
In Mach3, go to the Settings Tab, and select "Set Steps Per Unit". It will ask you how far to move the machine. Before you do this, make a mark on the table exactly where the end mill is resting. You can do this by lowering the end mill until it touches the material, then spinning it by hand to cut a small dimple in the material. Then, raise the end mill to clear the material, and assign a distance to move the machine. Once the machine moves and stops, measure the exact distance that it actually traveled with a tape measure, and enter this value into the dialog box that asks how far it moved. Mach3 will automatically adjust your steps per unit for that axis to be more accurate. Do this for all axes often to ensure you are cutting accurately. The longer distances you use calibrate, and the more precise you are with your measurements, the better.
Click the link to add information to this solution:
HOW DO I CALIBRATE IN MACH3?