[ Log In ]
[ Register ]

Question #: 173

Question: When will Andre pay for his items?

Current Solution

Try slowing your feedrate down and increasing spindle RPMs. End-mills will leave a poor finish if you go too fast. Make sure your cutting depth isn't too much. Maybe the endmill or cutter is blunt? Could it be the feed direction of the cutter? Some materials need to be fed in a certain direction.

Respond:

Other Possible Solutions to this Question

  • When will Andre pay for his items?

    tomorrow

    Click the link to respond:
    When will Andre pay for his items?

  • When will Andre pay for his items?

    tomorrow

    Click the link to respond:
    When will Andre pay for his items?

  • When will this migration end?

    The migration of our databases to another host will be completed by Thurdsay, Dec 17th, 8:00 am EDT.

    Click the link to respond:
    When will this migration end?

  • When will your usb interface board and plugin for Mach4 be available for purchase?

    We don't have a release date for the USB interface and Mach4 plug-in just yet. Keep an eye on the website for the latest information and when the USB interface will be available.

    Click the link to respond:
    When will your usb interface board and plugin for Mach4 be available for purchase?

  • when will my shipment arrive

    We email the tracking number to you. If you did not receive your tracking number, check your spam folder, or call us to get the status of your shipment.

    Click the link to respond:
    when will my shipment arrive

  • WHEN WILL MY GRAPES GROW?

    It usually takes about three years before you get a viable crop from young grapevines. We planted grapevines at a house we built in California and the first crop that actually had enough grapes that we could actually pick and eat them was three years later. We ate them as we left town on our way to the East coast and our new home. They were growing strong when we passed by the old house some 10 years later.

    A few varieties of grapes produce in two years, such as Brianna and Seyval grapes.

    The good news is that grape vines usually live between 50 to 70 years, depending on the variety.

    Click the link to respond:
    WHEN WILL MY GRAPES GROW?

  • I ordered Mach 3 how or when will I get it?

    You will receive the license file via email.

    Additional Information:
    You may have already received it. Always check you spam folder to see if the email landed there.

    Click the link to respond:
    I ordered Mach 3 how or when will I get it?

  • When will your 20mm guide rails be in stock?

    (6/10/2018) Transports from China take quite a while unfortunately. I don't actually have a date of arrival as they typically produce documents for transport and we have not seen them yet. When the documents arrive, it will take about 2 to 3 week from that time to actually reach the US.

    Click the link to respond:
    When will your 20mm guide rails be in stock?

  • Will you send me an email when my order ships?

    Yes, an email is sent to the customer as soon as a label is printed from our system. The email includes the carrier name and the tracking number so you can keep an eye on the path of the shipment, if the service that was purchased includes this tracking service.

    Click the link to respond:
    Will you send me an email when my order ships?

  • When will the 2.2kw 110v inverter be in stock?

    It's actually difficult to say when we will get our 2.2kW 110v VFDs (Variable Frequency Drives) in stock. The problem of predicting inventory stock with fluctuating sales is a challenge, especially at the price we offer. Please consider the 220v VFD, even if a 220 outlet is needed to be installed. We have found that the 220v VFD units performance to be better than the 110v VFD units.

    Click the link to respond:
    When will the 2.2kw 110v inverter be in stock?

  • When will the #40 Collar/Sprocket Combo be available ?

    We are in the process of finding a replacement vendor. If you purchase the combo, we will ship it out as soon as we have them in stock. If you change your mind, or we do not find a suitable vendor, you will be able to get a refund.

    Click the link to respond:
    When will the #40 Collar/Sprocket Combo be available ?

  • When will you have the 4kw spindle package back in stock?

    We are depreciating the 4 kW spindle. The size of this spindle is very large and heavy and our supplier is not carrying them anymore. The 2.2 kW spindle is such a good spindle for power and size that the 4 kW spindle is overkill for most of how we use machine, and for the general market that we are in at the moment.

    Click the link to respond:
    When will you have the 4kw spindle package back in stock?

  • I have a 5hp 3600 rpm 3phs spindle motor will your inverter work for this application 1.5kw?

    No. Horsepower is a measure of the rate at which a device can do work, as is the Watt. The conversion ratio is about 746 Watts = 1 Horsepower. Therefore your 5hp motor is equivalent to about 3,730 Watts. The kW designates kilowatts, or units of 1,000 Watts. So a 1.5kW inverter can supply only 1,500 Watts. Our larger inverter supplies 2.2kW, but you need a minimum of 3.7kW for your application.

    Click the link to respond:
    I have a 5hp 3600 rpm 3phs spindle motor will your inverter work for this application 1.5kw?

  • will you be getting this item back in inventory

    To which item are you referring?

    Click the link to respond:
    will you be getting this item back in inventory

  • When will the 2000 mm HIWIN Spec Linear Guide rail be available?

    That is difficult to tell at this time. Right when we get them in, they go fast. These items come from China and the units are shipped in via freight on ship, so there are many factors on the delivery such as weather.

    Click the link to respond:
    When will the 2000 mm HIWIN Spec Linear Guide rail be available?

  • Will your systems work for a homemade plasma table

    The plasma nozzle must be close to the cutting area and you will need some way to keep the nozzle at the right level with some type of device. The spray is downward, so you will need a contained area with a sheet of water at the bottom to extinguish he spray. You should have no problem using our machines for this application since you would need to product the table bed.

    Click the link to respond:
    Will your systems work for a homemade plasma table

  • CNC hardware and Plans and the does not want to pay for Customs coming into his country.

    Try slowing your feedrate down and increasing spindle RPMs. End-mills will leave a poor finish if you go too fast. Make sure your cutting depth isn't too much. Maybe the endmill or cutter is blunt? Could it be the feed direction of the cutter? Some materials need to be fed in a certain direction.

    Click the link to respond:
    CNC hardware and Plans and the does not want to pay for Customs coming into his country.

  • CNC hardware and Plans and the does not want to pay for Customs coming into his country.

    We recommend that you start by visiting the Motorola website (http://responsibility.motorola.com/index.php/consumers/wirelesscommhealth/). The site provides basic information and also give links to a number of other government and educational websites.

    Click the link to respond:
    CNC hardware and Plans and the does not want to pay for Customs coming into his country.

  • CNC hardware and Plans and the does not want to pay for Customs coming into his country.

    We recommend that you start by visiting the Motorola website. The site provides basic information and also give links to a number of other government and educational websites.

    Click the link to respond:
    CNC hardware and Plans and the does not want to pay for Customs coming into his country.

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.