If you are looking for the drivers to pair with NEMA 34 stepper motors, you can find the 6.0 amp drivers here:
https://www.buildyourcnc.com/item/electronicsAndMotors-stepper-driver-6!0a

The other electronics to send the signals to the 6.0 amp drivers (the control board that operates with the control software) is subject to personal preference, but here they are listed:

Our breakout board (works with Mach3 and LinuxCNC and requires a parallel port on your computer):
https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

The PoKeys57CNC (works with Mach3 and Mach4):
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board

Generic USB breakout board (works with Mach3):
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

Additional Information:
Do I need a driver for every motor or can I use one driver for all four motors

Additional Information:
Each motor needs its own driver.

Click the link to add information to this solution:
I HAVE NEMA 34 MOTORS BUT NEED THE ELECTRICAL COMPONENTS DO YOU A KIT WITHOUT INCLUDED?

The bluchick CNC router is a perfect small format CNC that can handle most jobs. Please check here to see the latest information on this CNC router. blueChick CNC Machine. The machine can be purchased assembled. Al you will need is a computer and spindle.

Click the link to add information to this solution:
I'm looking for a complete CNC router, out the box ready to use system. Computer and software. What do you suggest? I need a working area of 12"x24"

The greenBull 4X comes with all of the components and electronics to assemble the gantry of the machine. You will need to build the table. We provide the rails and roller chain for the X-axis (along the length of the table for full 8 feet of travel). You will need to provide some wire to connect the electronics and a computer to run the machine. You will also need to purchase the software that you will need to run the machine that matches how you will apply the machine. We suggest the mach3 control program. The CAM program is up to you as there are many options out there.

Click the link to add information to this solution:
I am interested in buying the greenBull 5X Long Z CNC Machine Kit, but it is not clear for me what is included in this kit. Is there anything else I need to get the machine work?

Building a vacuum table, for any CNC machine is possible but doing it right might take a adequate amount of information and extensive planning. Depending on the overall complexity you want to build.
Example, you want sections, and valves that can be operated to close sections of the table to allow vacuum to a specific spot of you material.
It is possible and would be a very precise method to hold down your material.


Additional Information:
Thanks. It may be something I'd like to try on my greenLean at some point. Dan Spangler wrote a nice article on building a "Universal" CNC vacuum table in the latest issue of Make magazine, volume 41.

Click the link to add information to this solution:
How feasible would a vacuum hold-down system be for a vertical CNC like the greenLean?

For our redLeaf CNC computer system, if the computer system section is none response check if you have power coming in from your wall outlet. If a spare PSU (power supply) is available, try replacing and running with the replaced PSU.


Additional Information:
Other considerations will included, RAM module (memory stick), and motherboard. Please verify you have power going to your motherboard first, by noticing if any LED's are turn on. If not Check PSU first.

Additional Information:
Yes there is power to the unit. There is a small green light lit on the motherboard and another green light lit near the usb ports. Usually when I press the yellow reset button, the computer starts, but now nothing happens...

Click the link to add information to this solution:
ALL OF A SUDDEN THE REDLEAF COMPUTER WONT TURN ON...THE CNC PART WORKS FINE, BUT MAIN ???

It is not necessary to connect the spindle VFD (Variable Frequency Drive also called an Inverter) to the computer or CNC motion electronics. The VFD can be controlled independently using the control panel on the VFD. The control panel has the ability to control all aspects of the spindle including Speed, Torque, limits, etc. However, you can connect the VFD to the computer so the CNC control program can control the spindle during the CNC Machine operation. You will need to connect the VFD to the computer via a serial conection (in this case, it is the RS-485 protocol).

The following are instructions on how to connect the VFD to Mach3 via this RS-485 serial connection.

The first thing you will need is the dynamic link library to pair with mach3 called the Huanyang VFD Mach3 PlugIn. You can find this file at the mach3 support forum here: http://www.machsupport.com/forum/index.php/topic,14182.0.html

You will also need to download the Microsoft .net 3.5 framework and install it: https://www.microsoft.com/en-us/download/details.aspx?id=21

Follow the pdf that comes with the library file, but here is a synopsis of what you need to do (I also added a lot more information that may be useful during this process as the manual does not cover the main connections that need to be done):

You will need to program your VFD so that it knows how to communicate with mach3 and the computer (go into the programming mode of the VFD and change these parameters):
- PD001 - value 2 - Enables with communication aspect of the VFD
- PD002 - value 2 - Enables frequency control from the communcations port
- PD163 - value 1 - VFD address
- PD164 - value 1 - Baud rate of 9600 (speed of the communication)
- PD165 - value 3 - 8N1 RTU - 8 bits (that's the size of the word that gets communicated), N (No parity or no error checking) and 1 (1 stop bit)

Copy the dll file to the PlugIns folder of mach3.

Connect the RX and TX lines to your computer. There are a couple ways you can do this, but the recommended way would be to use an FTDI USB device which converts a USB to a serial com port. The device will have Rx and Tx connectors to connect to the VFD terminals with the same labels. This method is recommended since serial ports are not as common in computers these days.

Next, you will need to configure mach3 to use the plugin library. Start mach3 and click on Menu -> config ->Config Plugins. Enable the new plugin by clicking on the red cross on the left column next to the plug in. Restart mach3 after doing this.

No you need to configure mach3 to use the HuanyangVFD plugin. Go to the ports & pins configuration and select the spindle setup tab. Make sure that the Disable Spindle Relays checkbox is unchecked. We don't want mach3 to output a signal for a relay since the spindle will start up and turn off within the VFD and not from an external relay.

Next, go to the HuanyangVFD settings by clicking on Menu -> plugin control -> HuanyangVFD. Set the parameters to the same settings you put into the VFD programming. The com port will be shown as new hardward when you plug in the USB FTDI device. A little bubble will be displayed at the bottom right where it will notify you that a new device is being installed (be patient while windows assigns a com port). Alternatively, you can use the windows device manager to see which port was set for the new USB FTDI device). You may need to restart mach3 several times until you get the correct information displayed in the PD001 and PD002 fields. When the com port is correct and the other parameters, like baud and VFD address is the same as you entered in the programming, then the PD001 and PD002 will show the number 2, otherwise, a 99 will appear which means that communication was not successful.

You can now control the on/off and RPM of the spindle using the RS485 communication between mach3 and the VFD.

Additional Information:
The question was how to connect the spindle to the redfy. I did not receive a VFD.
I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindle?

Additional Information:
If you received a spindle without a VFD, please contact us asap. Our spindle will not work without a VFD.

Additional Information:
Hi, how is this setup in mach4?

Click the link to add information to this solution:
I HAVE THE REDFLY SYSTEM AND A 2.2KW SPINDLE - 110V HOW DO CONNECT SPINDAL?

You can actually select many places for the switches, depending on where you think your zero will be. I will take pictures of where we positioned our switches. We set the positions so the zero is at the bottom left corner of the machine.

Additional Information:
I will take pictures tomorrow.

Additional Information:
Thank you. Just want to finish before the holiday.

Additional Information:
Not a problem at all and my apologies for not having that information. I have been meaning to put up a video on the limit switch connection as it is somewhat difficult to explain the process in words and diagrams.

Additional Information:
Any update?

Additional Information:
I plan on driving to the office later today and take pictures.

Additional Information:
Thank you. I've just done almost everything else. Just waiting for the grade 3 grease in the mail. Also, where do you suggest connecting the cable carriers? I ran everything through the top but the carrier is getting kind of full. Because of that, it is pushing the belt out when the gantry moves.

Additional Information:
I will take pictures of those connections as well.

Additional Information:
Much appreciated.

Additional Information:
It’s my pleasure.

Additional Information:
I’m almost to the office. I’ve been shuttling my kids around today. Sorry for the wait.

Additional Information:
I’m adding the images to the end of the VLXL instructions.

Additional Information:
The limit switch connections use the NO (Normally Open) terminals. That means that the switch, when not engaged, is normally open (no connection between the com and the NO terminal). When the switch is engaged, then the connection is closed and the NO and COM terminal become connected, making a circuit.

Additional Information:
Did you bend the arm on the x switch? Or can you mount it flush with enough give to trigger? Same on both sides?


Additional Information:
It does look like it is bent in the picture. No, you do not need to bend the arm of the rotary switch.

Additional Information:
We only have the rotary switch on one side.

Click the link to add information to this solution:
How do I wire the limit switches on the VLXL? Also, where do I place them? You included 2 rotary and two other limit switches.

The plans/hardware/electronics/mechanical includes everything but the wood structural components that can be cut by the customer. This plans/hardware option includes all of the electronics, like motors, drivers, controller, and all of the cables and wires to connect all of the electronics together. The mechanical components include shafts, couplings, linear rails, bearing blocks, sprockets, lead screws, etc. The hardware consists of all of the screws nuts, insert nuts, cross dowels, etc, to assemble all of the structural, mechanical, and electronics together.

Click the link to add information to this solution:
what does the plans, hardware, electronics and mechanical option consists of for a CNC router?

You will find a blackToe USB version on the product page:

https://www.buildyourcnc.com/Item/cnc-machine-blacktoe-v4-2x4

Click the link to add information to this solution:
Looking to buy a black toe 2x4, what electronics are included ? Is it optional with USB-interface? And for last do you ship to sweden?

That shouldn't be a problem. I will need the current rating for the motors. We can subtract the price of the motors. and you can add you own. If you want us to solder the cable to the round connectors and them motor, you would need to send the motors to us.

Let me know and I can send a paypal invoice for the redLeaf without motors.

Click the link to add information to this solution:
DON'T WANT TO USE MY OWN MOTORS FOR THE REDLEAF CNC COMPUTER SYSTEM.

You can use the board5.nc as the expansion parts.

Additional Information:
20

Click the link to add information to this solution:
Where is the link for the expansion kit for the CNC Routing Machine Kit Version 1.3?

The gantry sides, gantry bridge parts, two 1/2" rods, two 1/2" ID bearings, two 1/2" ID 12 tooth sprockets, and extra roller chain.

Click the link to add information to this solution:
WHAT IS INCLUDED IN THE BLACK TOE TO FOOT UPGRADE?

The CNC group is a splinter group of the Woodworker's Club of Houston" and can be found at this website: http://wwch.org

You can contact them via their contact us page here: http://wwch.org/ClubBus/ContactUs.htm

They have regular meetings at the location specified on their homepage. You can also go there and talk to some of the CNC group's members.

Click the link to add information to this solution:
Hi Patrick What is the name of that organization for CNC enthusiast in Houston and Katy TX and phone number please. Thanks

For our redLeaf CNC computer system, if the computer system section is none response check if you have power coming in from your wall outlet. If a spare PSU (power supply) is available, try replacing and running with the replaced PSU.


Additional Information:
Other considerations will included, RAM module (memory stick), and motherboard. Please verify you have power going to your motherboard first, by noticing if any LED's are turn on. If not Check PSU first.
Please contact customerservice@buildyourcnc.com if all else fails.

Additional Information:
Yes there is power to the unit. There is a small green light lit on the motherboard and another green light lit near the usb ports. Usually when I press the yellow reset button, the computer starts, but now nothing happens...

Click the link to add information to this solution:
All of a sudden the RedLeaf computer wont turn on...the cnc part of the computer works fine, but the main computer wont ???

Depending on the size of your CNC machine, it will vary the length required for your application.
Please verify the CNC machine, and we can go into detail on the specific lengths or methods for the linear guide mechanics.

We sell our ACME Screw (1/2" per inch), also our longest length of ACME Screw is 76-3/4".

Click the link to add information to this solution:
Hi, I need the lead screw and bearings for x/y/z axis of the CNC. What is the length of "1/2" Lead Screw per inch (Steel)"?

LaserCad-->File-->Factory Manage-->608111-->>Permanent right to use-->Set

Additional Information:

Click the link to add information to this solution:
How to unlock the AWC708C system, the driver's screen says the system is locked

The Linux CNC (EMC2) does not require a high performing computer. This application will run fine on a Pentium or later computer system. You will need a parallel port as either part of the motherboard, or as an adapter that plugs into one of the motherboard PCI slots.

Additional Information:
20

Click the link to add information to this solution:
what are the system requirements for the Linux CNC (EMC2)?

The electronics combo with the sku of 101 on Amazon.com includes a parallel interface.

Click the link to add information to this solution:
I am looking at your 3 axis CNC machine kit(part #101) on Amazon. Is the interface on this kit USB?

The best wiring diagram that can be used for the redLeaf and redSprout CNC computer system would be found on instruction #1 (datasheet for the breakout board) on this page: https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

Click the link to add information to this solution:
Hi I live in South Africa and want to know if i can buy a wiring and component diagram for the readleaf plug and play computer system?