Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens and nozzle. You will also need some mechanical parts and some motors, drivers and power supplies for the drivers and the controller.

Additional Information:
Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens and nozzle. You will also need some mechanical parts and some motors, drivers and power supplies for the drivers and the controller.

Click the link to add information to this solution:
I'm interested in getting the CO2 laser & Spindle for my Blackfoot - I currently have just the router mount. Do you sell complete kits or can you advise on what I need? Thank you

Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens, and nozzle. You will also need some mechanical parts and some motors, drivers, and power supplies for the drivers and the controller.

Click the link to add information to this solution:
I'm interested in getting the CO2 laser & Spindle for my Blackfoot - I currently have just the router mount. Do you sell complete kits or can you advise on what I need? Thank you

If you purchase the assembled machine (which we highly recommend since you are outside the US) the entire system is tested, so you will not need any replacement parts. We have used motors and spindles on our machines that work constantly and daily for many years. These items still work to this day.

Click the link to add information to this solution:
Dear Sir or Madam, I'm looking for high quality and reliable CNC for my shop and I can find that the greenbull 5x is suitable for me. Would you please clarify where the hardware items are made, and how reliable will the greenbull be. Take into consideration that I'm outside the US, so buying spare parts from you should be planned long before and unexpected maintenance would stop our work.

Consider the loads on each axis when choosing appropriate stepper motors. If your holding torque is maxed out at roughly 16oz/in (1lb/in), then you could use the NEMA 11 or 14. Also consider the shaft sizes and current ratings when choosing drivers that pair with the motors.

Click the link to add information to this solution:
I am planning to build a scratch CNC machine to do rotary engraving on writing pens. Can you recommend the parts I would need? I'm thinking NEMA 14 (11?) and 3/8" acme rod. Not sure which linear motion to use. I have an old lathe to use for the 4th axis.

Call again. Most likely, one of my employees were on the line with another customer at the time you called.

Click the link to add information to this solution:
I am interested in order the redleaf system you talked about for my machine, tried calling and mail box is full, no answer. How do I contact you?

We are working on a keypad that will connect to the USB interface. It is possible to create a quick keypad using perf-board and some push buttons. All you need to do is connect one side of the switch to the pin of the axis and direction and the other side of the push button to the 5v pin. The datasheet shows the pinout of the jog connector.

Additional Information:
I had found the pins to wire in a job connector. My question is, what sort of connector do I look for (on Amazon for example) that will work for each 2 pin pair? I suspect they are the same as the connector for power and reset on my computer's motherboard, but I have no idea what to look for (what to buy).
thanks.

Additional Information:
20

Click the link to add information to this solution:
I need to find a connector(s) to wire a pushbutton array to the USB board I purchased. Do you sell such a connector. Can you tell me what to look for?/What such a connector is called?

At this time we are in the process of developing a UK distributor. Stay tuned for details.

Click the link to add information to this solution:
Hi! I am interested in the blacktooth Kit. I live in UK. Is there any possibility of decrease the price of the shipment or do you know maybe an UK based kit provider? Thanks.

This would totally work for that application. This cable carrier is used for any object that needs to move and carries some electrical or tubing within it. This cable carrier is great for cable management where you want to make sure the wires and tubes are in a position that you set, not where the wires and tubing want to go.

Click the link to add information to this solution:
[311] I am looking to use this type of thing with a pipe for theater. Where the pipe can be lowered and it would have electrical and signal cable inside. Is this good for that or should I look at something else?

The greenBull 4X comes with all of the components and electronics to assemble the gantry of the machine. You will need to build the table. We provide the rails and roller chain for the X-axis (along the length of the table for full 8 feet of travel). You will need to provide some wire to connect the electronics and a computer to run the machine. You will also need to purchase the software that you will need to run the machine that matches how you will apply the machine. We suggest the mach3 control program. The CAM program is up to you as there are many options out there.

Click the link to add information to this solution:
I am interested in buying the greenBull 5X Long Z CNC Machine Kit, but it is not clear for me what is included in this kit. Is there anything else I need to get the machine work?

Yes, you can connect a THC, Torch Height Controller, with the Mach3 USB controller. The THC uses the inputs to determine if the z axis needs to move up or down according to the arc of the plasma torch. The THC connects its outputs to the inputs of the controller so the controller will be informed of the states of the plasma torch.

Click the link to add information to this solution:
I am interested in using the Mach3 USB interface board. I was wondering if there was a way to run a torch height controller with this board for use with a plasma cutter, and if so do you know of any THCs that will work. Thank you.

I'm not sure I understand the question. You are looking for spacers or sprockets?

Additional Information:
Nevermind, I found my answer. Thank you

Click the link to add information to this solution:
Since you don't sell the hardware only package for the Blackfoot 4'x8' can you tell me what items I should look for for the chain sprockets, spacers to mount them to the 1/2" rod, and chain? All the other parts I can source from elsewhere

Sure, we can send you a replacement LED indicator. Just send an email to customerservice@buildyourcnc.com, include your address and we will send it poste haste.

Click the link to add information to this solution:
The LED Status indicator on the front of my Blacktooth laser is not working any longer. I'm looking to get a replacement but can't seem to find them on your website. Do you sell replacements? Thank you.

There are two things to consider when using two stepping motors on a single axis. Since you want both motors to spin at the same rate and possibly in the same direction, you need to connect both motor drivers to the same breakout board pins. For example, if you want two motors on the x-axis and the x-axis pins on the breakout board are #2 for step and #3 for direction, the #2 will connect to the step (cp) terminal on each driver and the #3 will connect to the dir (cw) terminal on each driver.

However, if the motors will be opposing (one motor will need to spin in the other direction), you will need to consider either flipping the rack on one side, or adding a circuit to invert the direction (#3) signal going to that driver.

Click the link to add information to this solution:
I'm planning a rack and pinion style gantry, and need clarification on how to slave a second stepper to the Y (or X). Can you direct me to that information for your products?

The 2.2kW Spindle has many advantages over a standard router such as the Porter Cable. The most obvious benefit to the user is the significant reduction of both dust and noise.

Additional Information:


Additional Information:
What size water source is needed and how long can it be used before it is too warm? Do you have a pressure vs. flow curve for the spindle so I can properly size the water pump?

Additional Information:
I used a small pond pump inside a 5 gallon bucket. I put a little bit of windshield washer fluid in with it to keep anything from growing in it. It's worked great. I've had 1 hour run times with no noticeable increase in spindle temp.

Additional Information:

Click the link to add information to this solution:
I am interested in buying the 2.2 kW spindle. Does it run much quieter than a 2 hp Porter Cable router? You also mention a pump with a bucket of water. How long until the water is too warm to cool the spindle?

The THC and the triggering of the plasma are actually two different functions of a controller. To trigger a plasma cutter, you can use one of the outputs of the Mach3 USB controller (out 1, 2, 3, or 4). That output can be connected to a relay that connects to the two wires that will trigger the plasma.

This video will show how this is done:

Click the link to add information to this solution:
[575] How can I wire/ configure for a plasma cutter without THC? Plasma cutter has a cnc port, where when you short two of the pins, it activates the cutter. Just looking to see how to make that short when pressing f5 in Mach3.

We attempt to provide as many services as possible to fit the needs of the CNC community. For a quote on a custom job, please email customerservice@buildyourcnc.com and we will be happy to assist you.

Click the link to add information to this solution:
I bought longs motor nema 34 stepper motor with 4 powers supply and dm860 from ebay, would you be interested in doing all the wiring for me? I pay you for you time

The greenBull 4x8 is designed specifically for heavy usage with a larger gantry and 3 large NEMA 34 651oz-in motors on each axis. You can expect superior performance from the greenBull since it is specifically designed for every day production of 4x8 sheets of material.

Additional Information:


Additional Information:
The greenBull response was not an answer to my question. I'd still like to hear from users. There must be some suggestions comments from those that have built the machine?

Additional Information:
Strange that you got the response matching the greenBull answer. That was probably our automated "closest match". I would re-state the question and select the "no, the answer is not related" and let it hang out on the customer service page for a while to see if you get any bites.

Click the link to add information to this solution:
I'm looking for a CNC which will mill 4x8 MDF/OSB and birch, as well as other 3/4" species. Previously I used a Shopbot and Partworks - can we expect the same performance from this?

Our spindles have a runout of less than .0001 in, which includes that collets that we sell. If you use a collet from another manufacturer, we cannot guarantee this TIR (Total Indicated Runout) dimension.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Hi, I'm interested in the 1.5 kW (kilowatt) Water Cooled Spindle with Inverter (VFD), I would like to know about the run out of this spindle?

We currently cannot release or sell any plans at this current moment! We apologize for this inconvenience, however if you email us at customerservice@buildyourcnc.com. We can help you get the current parts you will need, for a fully functional 2.2kW z-axis assembly.

Click the link to add information to this solution:
I purachased a bluechick from you in 2011. I am upgrading from a Porter-cable router to a 2.2kw spindle. Can you supply me with drawings for the spindle mount so that I can cut the parts?