[ Log In ]
[ Register ]

Question #: 6863

Question: dimensions for table top to mill 8' long pirces with black toe

Current Solution

The dimensions for a blackToe 2'x8', will be:
L: 177.8750"
W: 26.75"

This will give you the rest point for the gantry which will be additional to the 8Ft, of cutting surface.

Respond:

Other Possible Solutions to this Question

  • table dimensions and clearance for 4' x 8' greenbull (torsion box)?

    For the 6'x12' greenBull table dimensions, the table width for the greenBull table must be 80.078" (6.67' or 203.398 cm) and must overhang the underside structure by 1-1/2" to make room for the rails and this overhang portion should be 3/4" thick. The length can be variable, but remember that the gantry takes up some of that space, so add about 34 inches to make room of the gantry and the connecting hardware for the roller chain on the four corners. We recommend if you want a full 12 feet of travel, the table must be at least 178 inches.

    Click the link to respond:
    table dimensions and clearance for 4' x 8' greenbull (torsion box)?

  • DO YOU HAVE BLACKTOE MACHINES WITH TABLES READY TO GO OR HOW LONG DOES IT TAKE MAKE ONE?

    Yes, we have the optional table for the blackToe, but we need to fabricate it, which only takes one day. We generally reserve one week for the total fabrication and packing of all parts.

    Click the link to respond:
    DO YOU HAVE BLACKTOE MACHINES WITH TABLES READY TO GO OR HOW LONG DOES IT TAKE MAKE ONE?

  • what are the table dimensions for 4' by 8' heavy duty greenbull?

    Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
    To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
    The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
    Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


    Link:
    https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

    Click the link to respond:
    what are the table dimensions for 4' by 8' heavy duty greenbull?

  • What are the overall dimensions of the black toe 2x4?

    The overall foot print of the blackToe 2' x 4', from farthest point to point are:
    Gantry only (kit):
    W: 37"-1/2"
    L: 18"
    H: 35"

    Gantry (kit) with the optional table (add-on):
    W: 37"-1/2"
    L: 36"
    H: 60"

    Click the link to respond:
    What are the overall dimensions of the black toe 2x4?

  • table dimensions for large format 4' by 8' greenbull?

    Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
    To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
    The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
    Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


    Link:
    https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

    Click the link to respond:
    table dimensions for large format 4' by 8' greenbull?

  • blackToe 2'x4' CNC Router - What are the actual x and y cutting dimensions (eg: 22"x46")

    The actual cutting dimensions for our blackToe machine is 2'(24") x 4'(48"), the overall size of the structure built is a bit larger so that our customers have the actual size mentioned with each of our machines!

    Click the link to respond:
    blackToe 2'x4' CNC Router - What are the actual x and y cutting dimensions (eg: 22"x46")

  • What are the table dimensions for the greenBull so I can build it.

    Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
    To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
    The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
    Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


    Link:
    https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

    Click the link to respond:
    What are the table dimensions for the greenBull so I can build it.

  • DO YOU HAVE BLACKTOES WITH TABLES?

    Yes, we have the optional table for the blackToe, but we need to fabricate it, which only takes one day. We generally reserve one week for the total fabrication and packing of all parts.

    Click the link to respond:
    DO YOU HAVE BLACKTOES WITH TABLES?

  • WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?

    Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
    To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
    The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
    Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


    Link:
    https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

    Click the link to respond:
    WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?

  • If I purchase the [blackToe 2x4 v4.1 CNC Machine Kit - USB Electronics - Table Included] all I would need for this CNC to be fully operational is a laptop with mach 3 software and a router. Is this correct?

    if you purchased the USB interface, you will need planet-cnc software rather than Mach3, and you will need a usb cable to connect the usb interface to the computer.

    The blackToe 2x4 CNC Machine Kit with optional table will need wire to connect the electronics. Don't forget to get some end mills to use for cutting the intended material.

    Click the link to respond:
    If I purchase the [blackToe 2x4 v4.1 CNC Machine Kit - USB Electronics - Table Included] all I would need for this CNC to be fully operational is a laptop with mach 3 software and a router. Is this correct?

  • HOW LONG SHOULD THE MOTOR CABLES BE FOR BLACKTOE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    HOW LONG SHOULD THE MOTOR CABLES BE FOR BLACKTOE

  • I have a blacktoe router table with a porter cable 892 currently in it. Which other router(s) fit the same mount?

    The motor mounts for the PC 890 series routers will fit the Bosch 1617 routers as well, however you will need to adjust the top mount to accept the slight edge of the Bosch 1617 router at the top motor mount.

    Click the link to respond:
    I have a blacktoe router table with a porter cable 892 currently in it. Which other router(s) fit the same mount?

  • WHAT ARE THE BLACKTOOTH SHIPPING DIMENSIONS?

    The blacktooth ships in 3 boxes.

    Structure 38x22x5 #54

    Components 14x13x13 #30

    Laser Tube 35x7x6 #4

    Click the link to respond:
    WHAT ARE THE BLACKTOOTH SHIPPING DIMENSIONS?

  • What are the specifications for the 2" strip brush as far as dimensions and width of the rubber top?

    The strip brush is .2 inches (5.23 mm) wide, so a slot of that width or slightly wider will work. We use a .25 inch groove and use glue to adhere the strip brushes in our dust shoe.

    The material of the bristles and the strip that holds the bristles are nylon.

    Click the link to respond:
    What are the specifications for the 2" strip brush as far as dimensions and width of the rubber top?

  • what are the specs of the blacktooth laser cutter (dimensions and weight) when assembled?

    The blackTooth envelope dimensions and weight:

    - Length and width: 37" x 34"
    - The height: 11.25"
    - The weight: 70 lbs.

    Click the link to respond:
    what are the specs of the blacktooth laser cutter (dimensions and weight) when assembled?

  • how long is the build time for a black toe 2x4 roller chain router and shipping time to ny?

    All of our machines are a week lead time, other than the greenLean which is 2 weeks. Depending where your current location is,shipping will take anywhere from 1 week in the US, 1-5 weeks over seas.

    Click the link to respond:
    how long is the build time for a black toe 2x4 roller chain router and shipping time to ny?

  • What are the bolt dimensions for the SBR20 linear rails, can they work with 8020 Aluminum extrusions?

    Our SBR20 rails use M8 bolts and are suitable for use with 8020 aluminum or any other common machine material. We suggest the use of our ball bearing pillow blocks with these rails, which you can find on our website here: https://buildyourcnc.com/item/mechanical-rails-linear-ball-bearing-block

    Additional Information:
    HOW TO FIND WIDH 38 HEIGHT 26 LINER GUIDE RAIL

    Click the link to respond:
    What are the bolt dimensions for the SBR20 linear rails, can they work with 8020 Aluminum extrusions?

  • What are the dimensions for a black toe torsion box? The machine dimensions are https://www.buildyourcnc.com/FAQ/1178 but I do not know the required overhang. I assume the overhang needs to be 3/4 inch ...
  • Can I get a replacement computer only ? I have a blacktoe with parallel port and it seems to have stopped working.

    Sure. If you had your own computer to start with and now need a replacement for it, consider our redSprout and redLeaf systems. You can find information about them here: https://buildyourcnc.com/AssembledElectronics.aspx If you started with one of our assembled systems, and only need to replace certain components, contact our sales department at sales@buildyourcnc.com for a quote.

    Click the link to respond:
    Can I get a replacement computer only ? I have a blacktoe with parallel port and it seems to have stopped working.

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.