We are developing a 4 foot by 8 foot (48" x 96") laser with 80 watts of power. If you need a laser at 36" x 52", you could use the 4'x8' laser and just build a shorter table. We will have this machine available in the latter portion of 2015.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Hello, I'm wondering if you could make a larger laser cnc if someone asks for it? Something like 36" x 52". And how much would it be?

If you are located near Houston, Texas area you can stop by our shop. If you are not near us, you can check in our forums, and see if you can find someone in your area that has one of our machines, and would be willing to let you come see it in action.

Click the link to add information to this solution:
I WOULD LIKE TO KNOW IF THERE IS A STORE OR SHOP WHERE CAN SEE THE PRODUCT AND BUY IT?

This will depend on the VFD you have to identify the correct terminal. The terminal on the VFD will be labeled AI1 typically (Analog Input #1). You will also need to make sure to complete the PWM circuit using the GND terminal on the VFD.

Additional Information:
I have wired my 0-10V signal to the AI1 and GND terminals as suggested. I have also set the PD-01 and PD-02 settings to 1. Still nothing. Is there something else that I am missing?

Additional Information:
Thanks for the information. Can you let me know the model of the VFD that you have?

Additional Information:
VFD Model # YL600-2S-2K20

Additional Information:
Thanks. I will check our resources and documentation to see if there is another programming setting that needs to be changed.

Additional Information:
Does your VFD have a VI terminal?

Additional Information:
No, it does not. The terminals for this VFD are as follows (seperated by dashes "-").

10V-AI1-AO2-PLC-DI5-DI3-DI1-COM
AI2-GND-AO1-DI6-DI4-DI2-FM-24V

Additional Information:
Do you have a PD070 parameter?

PD070 is the main Analog Input parameter.

The options for that parameter is:
0: 0-10V
1: 0-5V
2: 0-20mA
3: 4-20mA
4: 0-10V (4-20mA Stacked)
5: XIA
6: (VI+XIA)/2
7: (3VA+XIA)/4
8: (XIA_XIB)/2
9: Max (XIA, XIB)
10: Min (XIA, XIB)


Additional Information:
There is a PD-00 thru PD-09. PD-07 is currently set to 0.

Additional Information:
It appears that the manual I’m using “Titled YL600” is not the same as your unit. I will check our manuals and find the one that has only PD-00 to PD-09.

Additional Information:
For that VFD, the parameters are P0. The 0 may look like a D on the display.

The parameters that need to be changed for the AI1 to work (Brackets [] around the correct selection):

P0-01: First Motor Control Mode
- 0: Sensorless Vector Control
- 1: Flux Vector Control (FVC)
- [2]: V/F Control

P0-02: Options of Command Source
- 0: Operation Panel Command Channel (LED will be off)
- [1]: Terminal Command Channel (LED will be on)
- 2: Communication Command Channel (LED will flicker)

P0-03: Options of Principle Frequency Source X
- 0: Digital Setting (Preset Frequency P0-08, UP/DOWN modifiable, no power-down memory)
- 1: Digital Setting (Preset Frequency P0-08, UP/DOWN modifiable, with power-down memory)
- [2]: AI1
- 3: AI2
- 4: AI3
- 5: Pulse Setting (DI5)
- 6: Multi Speed Instruction
- 7: Simple PLC
- 8: PID (Proportional Integral Derivative Control)
- 9: Communication Given

P0-11: Upper Limit Frequency Source
- 0: P0-12 (Make sure the P0-12 parameter has the correct max frequency if used)
- [1]: AI1
- 2: AI2
- 3: AI3
- 4: Pulse Setting
- 5: Communication Given

P0-27: Command Source Bundle with Frequency Sources
Single Digit: Options of Operation Panel Command Bundle with Frequency Sources
- 0: No Bundling
- 1: Digital Setting Frequency
- [2]: AI1
- 3: AI2
- 4: AI3
- 5: Pulse Setting (DI5)
- 6: Multi Speed Instruction
- 7: Simple PLC
- 8: PID
- 9: Communication Given
Double Digit: Options of Terminal Command Bundle with Frequency Sources
Hundred Place: Options of Communication Command Bundle with Frequency Sources
Kilobit: Options of Automatic Operation Bundle with Frequency Sources

P2-09: Upper Limit Source of Lower Torque Under Speed Control Mode
- 0: Function Code P2-10 Setting
- [1]: AI1
- 2: AI2
- 3: AI3
- 4: Pulse Setting
- 5: Communication Given
- 6: MIN (Al1, Al2)
- 7: MAX (Al1, Al2)
- Maximum range for options 1-7, accords with P2-10

If you elect to use a different AI#, then configure the parameters (P0-03, P0-11, P0-27 and P2-09) accordingly.

Click the link to add information to this solution:
I'VE BUFFERED A PWM SIGNAL TO 0-10V ANALOG AND I WOULD LIKE USE THAT RUN YOUR 110V 2.2KW SPINDLE VFD. COULD YOU PLEASE DETAIL THE CORRECT WIRING VFD SETTINGS GET WORKING?

Sure, let me check.

Additional Information:
Your order was shipped out on Tuesday (10/20/2020). I noticed that your email was not stored in the customer record when the order was made. I will send you the tracking number via email now.

Click the link to add information to this solution:
Placed an order for the cable set for the Pokeys57cnc interface on 10/20 but it is not showing up in My Account as being ordered. It was charged to my credit card and I have not had any info that it was received by you.

We do have a relay board that words like a standard relay.

Here is the URL of the relay board that we offer:

https://www.buildyourcnc.com/item/electronicsAndMotors-breakout-Relays-relay-board-250V-12A-5V

Click the link to add information to this solution:
I HAVE YOUR MACH3 USB BOB, DO YOU GUYS SELL A TORCH CONTROL RELAY CAN WIRE UP TO TURN MY PLASMA ON AND OFF HOW WOULD WIFE THAT TOO THIS BOB?

Yes, our porter cable collets and nuts will fit the porter cable 7518.

Additional Information:

Click the link to add information to this solution:
HAVE PORTER CABLE 7518 ROUTER ON MY CNC AND WOULD LIKE TO KNOW IF YOUR ER20 COLLET NUT, FOR THE CABLE, WILL FIT ROUTER.

The Federal Communications Commission (FCC) is the primary federal agency responsible for safety aspects of modern-day wireless telecommunications systems. The FCC's Internet address is shown below. Recently FCC published an excellent report, cited below, to assist citizens and local governments dealing with siting of telecommuncations towers. This report contains charts and figures describing the characteristics and performance of telecommunications antennas. The report also contains practical guidance on application of provisions of the Telecommunications Act of 1996, which is the governing legislation regarding safety and siting of wireless telelcommunications facilities. Web page: RF Safety Program Page. Report title: "A Local Government Official's Guide to Transmitting Antenna RF Emission Safety: Rules, Procedures, and Practical Guidance." The Local and State Government Advisory Committee (LSGAC) and the FCC have developed this guide to aid local governmental officials and citizens in understanding safety issues related to radiofrequency emissions from telecommunications towers. Gary Zeman, Sc.D., CHP Lawrence Berkeley National Laboratory

Click the link to add information to this solution:
I AM TAKING THE FINAL YEAR PROJECT IN BASE STATIONS AND AIR INTERFACE. WOULD LIKE TO HAVE SOME INFORMATION.

If you purchased the ArtCAM from us, please send an email to us at customerservice@buildyourcnc.com with the name used with making the order and we will contact the developer to send you the license.

Click the link to add information to this solution:
i have Artcam 2013 for an General Inc. Icarver 40913. My computer crash with the Licenses from Delcam i would like to know how to get the licenses.

SketchUcam will output gcode which standard CNC control software will typically interpret, execute and control CNC machines. So, there is no problem using SketchUcam. However, our CNC machine control software that use our CNC machine interface boards require Windows OS, of Linux. The Mach3 USB board will only run with Mach3 control software which runs under the Windows OS. The parallel breakout board can run under Windows or Linux OS and the computer must contain a parallel port.

Click the link to add information to this solution:
I would like to know if your breakout board and driver boards are compatible with MAC OS X working with Sketch Up pro using SketchUcam ?

Buying both the blackToe and the 4th axis is an available option, but take into account the clearance available on the gantry. The best option for the table will be a adjustable mid-section table. That will be able to lower when the 4th axis is going to be used. Or have a elongated table that has a portion for the basic CNC, then a section for the 4th axis.

Click the link to add information to this solution:
Would it be possible to buy the blackToe, and the 4th Axis, then build your own Tslot table to attach both items to? Would a setup like this be possible?

See the question on our "Ask the Expert" question-and-answer list on cellular towers under nonionizing radiation for a discussion of RF safety issues associated with cellular radios. The technology underlying cellular radios and base station antennas is similar around the world, but there are differences in systems design and RF safety limits in different countries. For a summary of cellular radio RF safety issues with attention to international differences see the excellent Web page, Cellular Phone Antennas (Base Stations) and Human Health, by John E. Molder, Ph.D., from the Medical College of Wisconsin. Gary H. Zeman Sc.D., CHP

Click the link to add information to this solution:
I LIVE IN ITALY AND WISH TO KNOW MORE ABOUT RADIATIONS CAUSED FROM MOBILE TELEPHONES. TELECOM WOULD LIKE PLACE A WIRE-ANTENNA THE HEARTH OF MY TOWN, I'M AFRAID IT. WHICH KIND RISK HEALTH COULD IT CAUSE? THANK YOU IF WILL SEND ME SOME INFORMATION SCIENTIFIC ARTICLES THIS PROBLEM!

That will depend on the CNC machine kit that you select. Make sure to include a spindle with your purchase if the machine does not include one. You will also need end mills to serve as the cutting instrument that will conform to your application. Some machines do not include a table. For those, you will need to build the table for the machine. If you select a machine with electronics and you did not elect to purchase the redFly, redSprout or redLeaf, then you will need wire and cable to connect the electronics.

Connecting your redfly kit to computer do I need to program

Connecting cnc electronics to computer

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
WN3v4SBq

Additional Information:
-1 OR 2+707-707-1=0+0+0+1 --

Additional Information:
-1 OR 2+254-254-1=0+0+0+1

Additional Information:
-1' OR 2+394-394-1=0+0+0+1 --

Additional Information:
-1' OR 2+490-490-1=0+0+0+1 or 'gBN8UMgW'='

Additional Information:
-1" OR 2+438-438-1=0+0+0+1 --

Additional Information:
1'"

Additional Information:
1����%2527%2522

Additional Information:
@@w2c3K

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
To have a compete CNC solution i juste have to : Order and assembly a CNC kit , install a specific CNC software....And is that all ?

You will find a blackToe USB version on the product page:

https://www.buildyourcnc.com/Item/cnc-machine-blacktoe-v4-2x4

Click the link to add information to this solution:
Looking to buy a black toe 2x4, what electronics are included ? Is it optional with USB-interface? And for last do you ship to sweden?

If the VFD is presenting an ER 4 error, the VFD is most likely damaged. The VFD will either need to be serviced or you will need to purchase another VFD. The latter is probably the less expensive option, unfortunately.

Additional Information:


Additional Information:
i had that error and found a power in wire touching and fixed and started and all was good.
good luck

Additional Information:
i had that error and found a power in wire touching and fixed and started and all was good.
good luck

Additional Information:
i had that error and found a power in wire touching and fixed and started and all was good.
good luck

Additional Information:
i had that error and found a power in wire touching and fixed and started and all was good.
good luck

Click the link to add information to this solution:
I bought a 2.2 Kw spindle and YL620 A-2 from you and am getting an ER 4 message. How do I fix it?

We double box our tubes. The inside box contains the tube that is surrounded by foam. This inner box is wrapped with bubble wrap and then boxed again.

Carriers are not very careful with packages, but it is not typically from personnel handling, but the machines and conveyors that maneuver the boxes at their distribution centers.

Click the link to add information to this solution:
I ordered an 80w tune on Amazon for a good deal, it took over a month to arrive and was broken on arrival. Get what you pay for I guess :( of I order a tune from you can I expect it to be better packed and arrive quicker?

Our electronics contains a switchable power supply that allows you to switch the input mains voltage between 115 volts (110/120) and 230 volts (220/240). the hertx range is not specified, but there are capacitors to smooth out standard frequencies to enable DC output.

Click the link to add information to this solution:
hi, what about, if I buy from you some elecronic parts like (3 Axis Electronics Combo) and I use them here in france , where the electric voltage is 220V 50Hertz ? thats gonna works? thanks

Prior to the 2010-11 vaccination season, only children ages 6 months through 18 years and adults age 50 years and older were universally recommended for vaccination; recommendations for adults ages 19 through 49 years were targeted to people with specific risk factors, although other adults could be vaccinated if they wanted protection. Collectively, these targeted risk groups made up 85% of the U.S. population. During the 2009 H1N1 outbreak, additional risk groups were identified, such as obese individuals. The recommendation made by ACIP in February 2010 for universal vaccination simplifies previous recommendations, making it easier for healthcare providers to determine whom to vaccinate. The universal recommendation also makes it easier for patients to remember to get vaccinated every year.

Click the link to add information to this solution:
WE'RE GLAD THAT CDC HAS MADE A UNIVERSAL INFLUENZA VACCINATION RECOMMENDATION TO VACCINATE EVERYONE 6 MONTHS AND OLDER. WOULD YOU TELL US HOW THIS CAME ABOUT?

Once your place an order you should receive an confirmation email automatically. If you did not receive it please check if you entered your email address correctly or if it may have gone to a junk/spam folder. Generally with certain items we specify a lead time and once orders are ready to ship you will be automatically notified with an shipment notification email, assuming your email address was correctly entered. If you have any questions pertaining to orders please contact sales@buildyourcnc.com

Click the link to add information to this solution:
I ordered a WhiteAnt on Dec 5 (saturday). I have never received an order acknowledgement nor a shipping date, but my credit card has been charged. I don't think that is usual. Can you provide an update, please?

Artsoft (Also called Newfangled Solutions, Inc.) creates Mach3 and Mach3 along with other CNC related software. They are still in business. I noticed that the https seems to not work, so their SSL may have lapsed (2/19/2019). It is safe to use their website; however, if you do purchase on their site while their SSL is down, it's best to use their PayPal link to do the transaction.

Additional Information:
Or you can purchase the software from us.

Additional Information:
I would recommend Mach4 for the control software.

Click the link to add information to this solution:
Is Artsoft is out of Bussiness ? I am looking fo 64bit software , was going to use Mach4, so what would you recomend ? thanks John