[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 731

Question: how long would it take to build the blacktooth laser cutter?

Current Solution

The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

Respond:

Other Possible Solutions to this Question

  • How long does it take to build the blackTooth Laser Cutter?

    The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

    Click the link to respond:
    How long does it take to build the blackTooth Laser Cutter?

  • HOW DIFFICULT IS IT TO BUILD THE BLACKTOOTH LASER CUTTER?

    The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

    Click the link to respond:
    HOW DIFFICULT IS IT TO BUILD THE BLACKTOOTH LASER CUTTER?

  • HOW DIFFICULT IS IT TO BUILD THE BLACKTOOTH LASER CUTTER?

    The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

    Click the link to respond:
    HOW DIFFICULT IS IT TO BUILD THE BLACKTOOTH LASER CUTTER?

  • could you make available a larger size picture of the exploded view of the BlackTooth laser cutter? I would like to use for reference when building my laser cutter, but it is too small to be really useful.

    We have the image at that size to encourage the purchase of the kit from us. This helps to keep buildyourcnc alive and allows us to fund development of other awesome low cost machines.

    Click the link to respond:
    could you make available a larger size picture of the exploded view of the BlackTooth laser cutter? I would like to use for reference when building my laser cutter, but it is too small to be really useful.

  • Can we order a preassembled version of the blacktooth laser cutter and what would the lead time be.

    We do have the option of assembled blackTooth CNC.
    For further information on lead time and quote; please email (customerservice@buildyourcnc.com)

    Click the link to respond:
    Can we order a preassembled version of the blacktooth laser cutter and what would the lead time be.

  • How to wire the Laser Power Supply with an arduino & GRBL ? (I'm not using a blacktooth laser cutter)

    There is a th or tl on the laser power supply that serves as the trigger on a high or low signal. There is also a potentiometer "in" terminal that will accept a variable signal from 0v to 5v to control intensity. You can use either of these features to fire the laser tube.

    If you have gotten grbl to work, then, no doubtedly, you have the expertise to know the output features of grbl. If grbl allows a pwm output, you can tie this to the potentiometer terminal on the power supply. Otherwise, you will need to use a digital output to control the power supply using th or tl.

    Additional Information:

    Click the link to respond:
    How to wire the Laser Power Supply with an arduino & GRBL ? (I'm not using a blacktooth laser cutter)

  • how can I exhaust the blacktooth co2 laser cutter

    Exhausting the blackTooth laser cutter is a very important consideration and should be taken seriously, especially if you are cutting materials that give off toxic fumes when the material is burned. You will want a 4 inch hose to connect from the blackTooth to a blower, and another 4 inch hose to connect from the blower to the outside. The blower should be sufficient to provide completely negative pressure within the laser enclosure so there will be no escape of gasses.

    The connections at the machine, at the blower and at the location the hose exhausts outside should be thoroughly checked for leaks. Use a gasket, or silicone. Once complete, try cutting a non-toxic material that will give off an odor (wood, or non-toxic plastic) and try the system and determine if the smell is present.

    Click the link to respond:
    how can I exhaust the blacktooth co2 laser cutter

  • HOW CAN YOU ENHANCE THE BLACKTOOTH LASER CUTTER?

    Temperature probe monitor. Very valuable. This keeps you up to date on your coolant temperature levels.

    Voltage meter. This will tell you the exact level of voltage/power you are running telling the laser to run at instead of an arbitrary mark on a drawn wheel around your POT.

    Ammeter sensitive to 1mA. This will be sure your not over driving your tube and reducing it's life significantly.

    Hour meter. This will tell you exactly how long your system has been 'on' giving you a more accurate bead on the length of your tubes life.

    Exhaust fan upgrade. The current fan included is 100CFM. You can buy 120mm fans that push 250CFM and I have included a guide on how to go about doing this here. http://buildyourtools.com/phpBB3/viewto ... 8cdd1802bf

    To push the exhaust fan even further, if you have the room/power, I would highly recommend investing in a 600+ CFM "Dust Collector" system. 250CFM is still not suffice to draw all the smoke that can come off of 3mm or 1/8 MDF cutting job.

    A cutting surface. I bought myself a aluminum 'egg crate' mesh from my local HVAC company. They are used a cover for fluorescent lights and work great for low impact cutting surface. They come in 4'x8' sheets and are easily cut to fit. The other side is if you can find a steel honeycomb cutting bed to fit. These can be quite costly or fairly affordable depending where you are looking. The benefit of a steel honeycomb is you can use high power magnets to hold material down.

    Click the link to respond:
    HOW CAN YOU ENHANCE THE BLACKTOOTH LASER CUTTER?

  • WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

    If you take the standard parallel cable BoB (Break Out Board), then you will need control software (Mach 3 or EMC2) and CAM software to make your G-Code (such as CamBam). Personally I use CamBam and Mach 3, they work beautifully but don't expect to turn them on and know how they work out of the box. Give yourself a few weeks to get familiar with the basics. CamBam is VERY powerful software for it's price. I'm surprised how much I keep learning on what I can do with it...I highly recommend it if you want as much control as possible.

    Mach 3 + CamBam as a bundle costs $310. EMC2 will give you a free replacement for Mach 3 and is exclusively for Linux.

    If you use the USB BoB, it will cost an extra $75 + $75 for the software. This is an all-in-one package so no need for Mach 3 or CamBam.

    For etching rasters (jpeg, bmp, tiff, non-vectors, photos), I highly recommend PicEngrave. It has been a labor of love for the past 9 years and John has done a wonderful job with it. It easily compares in quality compared to software that is in the $200-$300 range. John's software runs $40 and can be found here: http://picengrave.com/ (don't let the modest website fool you, this stuff can do amazing things). DotG and the Mach3 engrave plugin are two other options and instructions can be found on Dustans page in the gallery on buildyourcnc.com website.

    Click the link to respond:
    WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

  • WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

    I would say mechanically, between the official build instructions, Warren's awesome blog (http://blacktoothlaser.blogspot.com/) and the tips in the forum, the blackTooth is a really simple build. The challenges come with electronics and software. There's a number of different ways to drive the laser and motors. A decent understanding of electronics and computers is a must.

    Click the link to respond:
    WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

  • How long should it take to build the vertical laser kit?

    Assembling the Vertical Laser XL machine will vary depending on your specific abilities. The length of time can be as short as one weekend, or as long as two weeks.

    Click the link to respond:
    How long should it take to build the vertical laser kit?

  • How long does it take to build the 40 watt laser kit?

    The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

    Click the link to respond:
    How long does it take to build the 40 watt laser kit?

  • What size and length of cable carrier suits the BlackTooth laser cutter?

    The space within the blackTooth laser cutter is so tight that a cable carrier will not fit.

    Click the link to respond:
    What size and length of cable carrier suits the BlackTooth laser cutter?

  • I ordered the blacktooth laser cutter, there were only 4 red spade terminals, but the instructions pictures show that there should be more and would include blue spade terminals

    If you received fewer parts than is called for in the instructions, we will send the proper parts to you. Please call us to have these parts sent to you.

    Click the link to respond:
    I ordered the blacktooth laser cutter, there were only 4 red spade terminals, but the instructions pictures show that there should be more and would include blue spade terminals

  • blacktooth cnc laser plans, are they available? I would like to build my own parts. are there 3D cad files available?

    We do not currently provide any plans for our machines. We do provide a scratch build kit with plans, DVD, and hardware. You can find it here https://www.buildyourcnc.com/cnckitintro.aspx

    Additional Information:
    WE are a technical school and would like to build a laser cutter for the school that can cut up to 6mm plate please help us ti find drawings to build it

    Click the link to respond:
    blacktooth cnc laser plans, are they available? I would like to build my own parts. are there 3D cad files available?

  • Patrick, How does the blacktooth laser cutter compare with other commercially available cutters such as the Epilog or "Ebay cheapo" lasers?

    The blackTooth laser generally has a larger work area and the laser is easier to align. The larger work area also has better efficiency of lasing and more evenly distributed power at the lased point.

    These features are a result of the tube being placed on the gantry of the machine. The alignment only needs to consider a single axis rather than two axes which causes an alignment problem with an order of magnitude higher difficulty.

    Click the link to respond:
    Patrick, How does the blacktooth laser cutter compare with other commercially available cutters such as the Epilog or "Ebay cheapo" lasers?

  • Where are the wiring diagrams for the blackTooth laser cutter?

    You can find the wiring diagrams for the blackTooth on step 105 and 106 on the list of instructions on the blackTooth page. Step 105 pertains to the parallel breakout board and step 106 pertains to the USB interface board.

    Additional Information:
    wire size

    Click the link to respond:
    Where are the wiring diagrams for the blackTooth laser cutter?

  • How much is your ; blackTooth Laser Cutter and Engraver CO2 40W

    You can find all of the information including the price on the blackTooth Laser cutter and engraver page found here: https://www.buildyourcnc.com/blackToothLaserCutterAndEngraver.aspx

    Click the link to respond:
    How much is your ; blackTooth Laser Cutter and Engraver CO2 40W

  • Is the blackTooth Laser Cutter available for custom size orders?

    We will generally consider a change in dimensions or machine features if the change will be beneficial to other users as well. This is due, in part, to the time it takes to make such changes and that it maintains the desired functionality and expected safety.

    What dimensional changes do you wish for the blackTooth?

    Additional Information:
    I was hopping to be able to have a cutting surface of 2' x 4'

    Additional Information:
    We have that size in our queue to be designed. However, you may be more interested in the laser adapter we are designing for the existing CNC machines to house a laser tube on the z-axis of these machines. This will be a quicker turnaround.

    Additional Information:
    Is there a time frame possibly to having this adapter made as well as cost? I am possibly looking to start a business so I am looking for something I can use to mass produce some specific parts.

    Additional Information:
    There is one project that takes precedence to the adapter, so I would expect in two months time.

    Click the link to respond:
    Is the blackTooth Laser Cutter available for custom size orders?