[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 7989

Question: Do you sell plans (dimensions of parts, or even g-code) for me to build a greenbull?

Current Solution

The files and hardware option for our machines has been removed from the site due to the following reasons:
Difficulty for the end use of the files and the challenges (and time/money) on our side to assist in using these files.
The abuse of these files over the internet.
Ultimately may reduce the sales of machines keeping us in business.
Sadly, this is what has come out of our company attempting to be open; however, the machines sold on this site is still far lower in price than the competition for the quality that we provide as we have a great desire to engender the cottage industry to fulfill their need for low end manufacturing. My sincere apologies if this causes any inconvenience.

Additional Information:
NO, is not possible, I can help with the shipping cost

Respond:

Other Possible Solutions to this Question

  • Can I purchase plans to scratch build the Blackfoot or GreenBull machine

    Unfortunately we no longer include or sell our CNC plans for none of our machines. We will be here to assist you if any parts wear over time, and will be able to replace the parts if needed.

    Charges may be subjected due to time of purchase and cause of wear.

    Click the link to respond:
    Can I purchase plans to scratch build the Blackfoot or GreenBull machine

  • Is it possible to get only the plans for the woodpieces for greenbull cnc

    The files and hardware option for our machines has been removed from the site due to the following reasons:
    Difficulty for the end use of the files and the challenges (and time/money) on our side to assist in using these files.
    The abuse of these files over the internet.
    Ultimately may reduce the sales of machines keeping us in business.
    Sadly, this is what has come out of our company attempting to be open; however, the machines sold on this site is still far lower in price than the competition for the quality that we provide as we have a great desire to engender the cottage industry to fulfill their need for low end manufacturing. My sincere apologies if this causes any inconvenience.

    Additional Information:
    NO, is not possible, I can help with the shipping cost

    Click the link to respond:
    Is it possible to get only the plans for the woodpieces for greenbull cnc

  • BUILDING ONE OF YOUR GREENBULL 6X LONG AND 2.2 KILOWATT SPINDLE DOES NOT FIT. SEEMS LEAD SCREW YOU SENT WITH KIT IS SHORT 42" LOOKS LIKE IT NEEDS TO BE 5 OR 6 INCH LONGER. THIS CORRECT? WHAT THE NEEDED LENGTH FOR UNIT?
  • What are the table dimensions for the greenBull so I can build it.

    Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
    To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
    The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
    Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


    Link:
    https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

    Click the link to respond:
    What are the table dimensions for the greenBull so I can build it.

  • Can I run your greenBull CNC off of a generator? If so, what specs would you recommend? Thanks!

    If you want to run a greenBull CNC machine using a generator, The generator will need to allow for a minimum amount of current draw. Here is a list of items that draw current and how much current (the list does not include the laser option):

    Spindle: 10 amps minimum so plan for more.
    The power supply for three motors and drivers: 9 amps
    The computer to run the control software: varies but out redleaf system would be a max of 2 or so.

    So you are looking at about 21 minimum so you will probably need a 25 amp generator.

    Click the link to respond:
    Can I run your greenBull CNC off of a generator? If so, what specs would you recommend? Thanks!

  • Do you have customers/builders in the Netherlands who I can ask for help or assistance?

    I would recommend creating a post in our forums page (buildyourtools.com), and ask any specific questions there! Since there might be someone willing to help you locally!

    Since we cannot disclose any customers contact information, without there permission! Going through the forums will be the best idea to be able to find someone locally, with one of our machines!

    Also you can contact us directly at customerservice@buildyourcnc.com

    Click the link to respond:
    Do you have customers/builders in the Netherlands who I can ask for help or assistance?

  • I BOUGHT YOUR BOOK AND WAS HOPEING IT HAD PLANS OR DIMENTIONS ON HOW TO BUILD A CNC HOLD 4X8 SHEET OF PLY. WILL THE IN SCALE UP?

    BYCNC Response:
    The book build was intended to be 20 inches x 40 inches. Larger machines were designed after the book build was introduced so customers would have the option to go bigger than what the book offered. Check out our larger machines on the website as the machines sizes range from 1 foot x 3 feet all the way up to 6 feet x 12+ feet.

    User Response:
    I'm not wanting to spend $3,000+ on a machine, I want to build one that will do a 4x8 sheet of wood. Will the plans in the book scale up?

    BYCNC Response:
    It is possible to scale the book build up, but the rigidity of the gantry would be questionable at that span, even if the height of the gantry structure were to be increased. The gantry design would need to be modified to become a box shape rather than a flat configuration. The kits on the site were design for those wanting a larger machine.

    Click the link to respond:
    I BOUGHT YOUR BOOK AND WAS HOPEING IT HAD PLANS OR DIMENTIONS ON HOW TO BUILD A CNC HOLD 4X8 SHEET OF PLY. WILL THE IN SCALE UP?

  • Building one of your greenBull 6X Long and 2.2 kilowatt spindle does not fit. Seems lead screw you sent with kit is short 42" looks like it needs to be 5 or 6 inch longer. Is this correct? What is the needed length of lead screw for this unit?
  • Do you have any videos or plans for how to make a strong table for a large CNC router? I saw the torsion box videos but would like some more guidance on how to build just a good table.
  • Do you provide plans and/or parts to build the blackFoot CNC table?

    The available options for the blackFoot, is only structural components with hardware, and structure components/hardware with electronic components.
    However we currently do not have any plans available for public use/distribution.

    Click the link to respond:
    Do you provide plans and/or parts to build the blackFoot CNC table?

  • ok I Build my CNC machine table and now need a complete set for motor and software how you can help me

    Yes, I will need to know more specifics of the machine so I can recommend the correct electronics.

    Click the link to respond:
    ok I Build my CNC machine table and now need a complete set for motor and software how you can help me

  • Do you sell 22 to 24 AWG stranded and shielded for wiring of the limit switches and E_Stop?

    The wire that we sell for the limit switch wiring is here: https://www.buildyourcnc.com/item/3d-printer-component-cnc-electronicsandmotors-cable-wire-3-conductor-22-awg-wrcon-cablewire3conductor22awg

    This is shielded cable to make sure there isn't any external interference with sensitive components and long wires associated with limit switches. This is necessary due to the interference caused by the motors on a CNC router and the milling process.

    Additional Information:
    So unshielded is cool. That's what I was curious about. Cheers.

    Additional Information:
    Absolutely. It's really the only type of cable I would recommend for connecting limit switches.

    Click the link to respond:
    Do you sell 22 to 24 AWG stranded and shielded for wiring of the limit switches and E_Stop?

  • The plans/hardware option for the greenBull includes what?

    The plans/hardware/electronics/mechanical includes everything but the wood structural components that can be cut by the customer. This plans/hardware option includes all of the electronics, like motors, drivers, controller, and all of the cables and wires to connect all of the electronics together. The mechanical components include shafts, couplings, linear rails, bearing blocks, sprockets, lead screws, etc. The hardware consists of all of the screws nuts, insert nuts, cross dowels, etc, to assemble all of the structural, mechanical, and electronics together.

    Click the link to respond:
    The plans/hardware option for the greenBull includes what?

  • do you sell plans for big machine with chain driven and how much its cost as dxf file which i can cut using cnc

    The plans or DXF files are not offered. We sell the machines as kits or fully assembled. The kits are very well priced and will most likely cost less if materials and labor than working from plans (this comes from feedback from many customers that built similar machines from plans).

    Click the link to respond:
    do you sell plans for big machine with chain driven and how much its cost as dxf file which i can cut using cnc

  • do you sell plans for big machine with chain driven and how much its cost as dxf file which i can cut using cnc

    The plans or DXF files are not offered. We sell the machines as kits or fully assembled. The kits are very well priced and will most likely cost less if materials and labor than working from plans (this comes from feedback from many customers that built similar machines from plans).

    Click the link to respond:
    do you sell plans for big machine with chain driven and how much its cost as dxf file which i can cut using cnc

  • I bought your book and was hopeing it had plans or dimentions on how to build a cnc to hold a 4x8 sheet of ply. Will the CNC in the book scale up?

    BYCNC Response:
    The book build was intended to be 20 inches x 40 inches. Larger machines were designed after the book build was introduced so customers would have the option to go bigger than what the book offered. Check out our larger machines on the website as the machines sizes range from 1 foot x 3 feet all the way up to 6 feet x 12+ feet.

    User Response:
    I'm not wanting to spend $3,000+ on a machine, I want to build one that will do a 4x8 sheet of wood. Will the plans in the book scale up?

    BYCNC Response:
    It is possible to scale the book build up, but the rigidity of the gantry would be questionable at that span, even if the height of the gantry structure were to be increased. The gantry design would need to be modified to become a box shape rather than a flat configuration. The kits on the site were design for those wanting a larger machine.

    Click the link to respond:
    I bought your book and was hopeing it had plans or dimentions on how to build a cnc to hold a 4x8 sheet of ply. Will the CNC in the book scale up?

  • Would you sell a kit that has all of the hardware and electronics with CNC plans for the table and gantry? Some of have access to a CNC temporarily (TechShop) but want one of our own.

    We currently do not sell any plan's for any of our machines, only for our scratch and build kit.

    Click the link to respond:
    Would you sell a kit that has all of the hardware and electronics with CNC plans for the table and gantry? Some of have access to a CNC temporarily (TechShop) but want one of our own.

  • table dimensions and clearance for 4' x 8' greenbull (torsion box)?

    For the 6'x12' greenBull table dimensions, the table width for the greenBull table must be 80.078" (6.67' or 203.398 cm) and must overhang the underside structure by 1-1/2" to make room for the rails and this overhang portion should be 3/4" thick. The length can be variable, but remember that the gantry takes up some of that space, so add about 34 inches to make room of the gantry and the connecting hardware for the roller chain on the four corners. We recommend if you want a full 12 feet of travel, the table must be at least 178 inches.

    Click the link to respond:
    table dimensions and clearance for 4' x 8' greenbull (torsion box)?

  • Do you offer plans for the blackToe CNC Machine?

    The blackToe machine is offered as a kit only. We do have a machine that is build form plans. The plans refer to the scratch build machine: http://www.buildyourcnc.com/cnckitintro.aspx and the one in the book "Build Your Own CNC Machine": http://www.buildyourcnc.com/Book.aspx

    Additional Information:
    20

    Click the link to respond:
    Do you offer plans for the blackToe CNC Machine?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.