[ Log In ]
[ Register ]
PoStep25-32 0.5 to 2.5 Amps Phase Current
PoStep25-32 0.5 to 2.5 Amps Phase Current
Price Options Your Cart $0.00
PoStep25-32 Stepper Driver
$19.50
Introduction:

This is the PoStep25-32 with a 0.5 to 2.5 Amps Phase Current.

Description:

PoStep25-32 Downloads

  • 0.5 to 2.5 Amps Phase Current
  • Simple current setting with jumper
  • Compatible with 4, 6, and 8 wire stepper motors of any voltage
  • +10 VDC to +30 VDC Power Supply
  • 1, 2, 4, 8, 16 and 32 Micro-steps per Step
  • Mixed decay mode for smoother moving of motors
  • 3,3V and 5V logic compatible inputs
  • 250 KHz Max Step Rate
  • 0 °C To 70 °C Operating Temperature
  • LED Power, Error and Enable Indicator
  • Improved thermal managing
  • Small Size: 50 mm X 52 mm
  • Related Tutorials
    CNC Electronics Tutorial Image CNC Electronics and Wiring
    This tutorial will make you an expert in wiring CNC electronics using a parallel breakout board and standard stepping motors and stepping motor drivers.
    Thumbnail: USB Controller wired to one driver and one stepper motor Wiring the CNC Motion Electronics with the USB Interface
    Here is a tutorial on connecting drivers and stepping motors to the USB Interface for CNC machines. We offer the USB interface/controller for those that have a laptop, or don't have a parallel port on their computer, and who prefer to use the Planet-CNC software. Here I show a video on the entire process to get your USB Interface connected to the stepper drivers and stepper motors correctly and in a simple and trouble free way.
    Greg C's Machine and Example
    Greg has produced an excellent CNC machine. This can be seen through the example that he provided me. Greg produced the machine "by the book", as they say. This demonstrates that the book readers are starting to enjoy their machines. This is an exciting time!! I received the pictures of this machine on February 17th, 2009.