[ Log In ]
[ Register ]
4 Pin Round Female Connector Back of Round 4 Pin Female Connector with Fastening Nut The Diameter of the Round 4 Pin Female Connector The Maximum Thickness that the Panel (Length of the Threaded Portion)
4 Pin Round Female Connector Back of Round 4 Pin Female Connector with Fastening Nut The Diameter of the Round 4 Pin Female Connector The Maximum Thickness that the Panel (Length of the Threaded Portion)
Price Options Your Cart $0.00
4 Pin Round Female Connector
$6.15
Introduction:

This connector mates with this male connector. These connectors are perfect for stepper motors and drivers. This connector would be fastened to a panel. The female connector can also be fastened to the male connectoras they both have mating threads. A set consisting of a male and female connector is also available.

Description:

The panel to which this connector will be fastened cannot exceed a thickness of .239 inches (6.0706 mm) as shown in the image. In the image, the nut has only been turned with a couple of rotations when this measurement was made.

The diameter of the hole on the panel must be at least .662 inches (16.8148 mm).

Related Tutorials
greenBull 4X official announcement Press Release: BuildYourCNC announces greenBull 4X: 4' x 8' routing area CNC Kit with laser capability
BuildYourCNC is pleased to announce the new greenBull 4X: the first 4'x8' CNC kit to feature dual laser/CNC capability.
greenBull cutting aluminum Cutting Aluminum Fail Using a Cheap End Mill
In this video we’re cutting an aluminum ring from a solid block of 6061 aluminum. The client gave us specifications that the ring needs to be 1 and a half inches in length, about 4 inches for the outside diameter, and about 1/4 inch for the wall thickness.
Laser mirror alignment Laser Mirror Alignment Tutorial for Vertical Laser XL
In this series we'll be explaining how to align the laser mirrors on your Vertical Laser XL machine. Note that these techniques can also be used for alignment on the blackTooth laser cutter and engraver.