[ Log In ]
[ Register ]
[ Your Cart ]
Need Help?
Customer Service Live for Free Support.
281-815-7701 Sales
Buy Token for Direct and Immediate Tech Support!

Search Results for: SPINDLE

$146.78
Tumbnail: Z-Axis Assembly for the 2.2 kW (kilowatt) Spindle The spindl...
 If you need to collect the dust rather than having it fly all over the place, the z-axis assembly with dust shoe is a good choice. These ass...

$279.95
Tumbnail: 1.5kW Spindle (220 Volt)
This is a 1.5 kilowatt spindle which roughly translates to 2.01 HP. The spindle is water cooled which requires a pump and tubing. We are usi...

$349.95
Tumbnail: 1.5kW Spindle (110 Volt) OUT OF STOCK
 This is a 1.5 kilowatt spindle which roughly translates to 2.01 HP. The spindle is water cooled which requires a pump and tubing. We are usi...

$19.95
6mm ER11 Collet 6mm ER11 Collet for Spindles
 This is the part of the spindle that will hold and grip the end mill at the spinning part of the spindle. This is a collet for smaller spind...

$19.95
ER11 4mm collet 4mm ER11 Collet for Spindles
 This is the part of the spindle that will hold and grip the end mill at the spinning part of the spindle. This is a collet for smaller spind...

$528.00
2.2kw Spindle with Inverter or VFD (Variable Frequency Drive) 2.2kW Spindle with 220V Inverter
 Order the 2.2kW Water Cooled Spindle and Inverter Combo for more efficient, quieter CNC routing. Ships from USA. Warranty and Support availa...

$548.00
2.2kw Spindle with Inverter or VFD (Variable Frequency Drive) 2.2kW Spindle with 110V Inverter
 Order the 2.2kW Water Cooled Spindle and Inverter Combo for more efficient, quieter CNC routing. Ships from USA. Warranty and Support availa...

$429.00
Tumbnail: 1.5kW Spindle with Inverter (220 Volt)
This is a 1.5 kilowatt spindle which roughly translates to 2.01 HP. The spindle comes with the inverter (Variable Frequency Drive) that acce...

$529.00
Tumbnail: 1.5kW Spindle and Inverter (110 Volt) OUT OF STOCK
 This is a 1.5 kilowatt spindle which roughly translates to 2.01 HP. The spindle comes with the inverter (Variable Frequency Drive) that acce...

$889.00
Tumbnail: 4.0kW Spindle with Inverter (Out of Stock and No Longer Carr...
 This is a 4.0 kilowatt spindle which roughly translates to 5.364 HP. The spindle comes with the inverter (Variable Frequency Drive) that acc...

$19.95
er-11 1/4 ER-11 1/4"
 This is the part of the spindle that will hold and grip the end mill at the spinning part of the spindle. This is a collet for smaller spind...

$19.95
1/8 1/8" ER-11 Collet
 This is the part of the spindle that will hold and grip the end mill at the spinning part of the spindle. This is a collet for smaller spind...

$339.00
2.2KW Spindle 2.2kW Spindle - 220V
 Order the 2.2kW Water Cooled Spindle for more efficient, quiet CNC routing! Ships from the United States. Warranty & Support available now. ...

$339.00
2.2KW Spindle 2.2kW Spindle - 110V
 Order the 2.2kW Water Cooled Spindle for more efficient, quiet CNC routing! Ships from the United States. Warranty & Support available now. ...

$55.00
80mm mount for Spindle 80mm Mount for Spindle
Want to solidify your Spindle with an aluminum mount? This is a the way to do it.

$1299.00
Spindle/Laser Combo Head 2 Laser/Spindle Head Combo with 110V Laser Power Supply
This Laser/Spindle Combo Head is designed to add laser functionality to the greenBull CNC machine. It comes included with a 2.2kw Spindle. W...

$1299.00
Spindle/Laser Combo Head 2 Laser/Spindle Head Combo with 220V Laser Power Supply
This Laser/Spindle Combo Head is designed to add laser functionality to the greenBull CNC machine. It comes included with a 2.2kw Spindle. W...

$749.00
Spindle/Laser Combo Head 2 Laser Head Combo w/ 110v Power Supply: No Spindle Included
 This Laser/Spindle Combo Head is designed to add laser functionality to the greenBull CNC machine. It comes included with a 2.2kw Spindle. W...

$749.00
Spindle/Laser Combo Head 2 Laser Head Combo w/ 220v Power Supply: No Spindle Included
This Laser/Spindle Combo Head is designed to add laser functionality to the greenBull CNC machine. It comes included with a 2.2kw Spindle. W...

$849.00
Spindle/Laser Combo Head 2 Spindle Head Combo - No Laser Components
This Laser/Spindle Combo Head is designed to add laser functionality to the greenBull CNC machine. It comes included with a 2.2kw Spindle. W...

$229.00
Spindle/Laser Combo Head 2 Barebones Structure (Wood Pieces and Hardware) - No Spindle ...
 This Laser/Spindle Combo Head is designed to add laser functionality to the greenBull CNC machine. It comes included with a 2.2kw Spindle. W...

$88.40
Main image of pump, water reservoir, fan, radiator, G1/4 fittings and silicone tubing for CNC router spindle water cooling and CPU Cooling Spindle Cooling Base Kit - Pump, Fan, Radiator, Reservoir, F...
 Cool your "Water Cooled" spindle for your CNC Router or CNC Machine with this compact kit of pump, water reservoir, fan, radiator, G1/4 fitt...

$98.30
The pump, water reservoir, fan, radiator, G1/4 fittings and silicone tubing for CNC router spindle water cooling and CPU Cooling kit all connected using silicone tubing with 1/4 Spindle Cooling Kit with 12VDC Power Supply
 Cool your "Water Cooled" spindle for your CNC Router or CNC Machine with this compact kit of pump, water reservoir, fan, radiator, G1/4 fitt...

$16.40
Threaded spindle connector variant 2 Round 4 Pin Female 20mm Threaded Spindle Connector
 This is a 4 pin replacement female spindle connector with a 20mm threaded connection for mechanically securing this connector to the spindle...

$609.00
Tumbnail: 4.0kW Spindle (Out of Stock and No Longer Carried)
 This is a 4.0 kilowatt spindle which roughly translates to 5.364 HP. The spindle is water cooled which requires a pump and tubing. We are us...

$23.95
Tumbnail: 1/2" ER-20 Collet for Spindles
 This collet will accept tools with a 1/2" (12.7mm) shank. This is a clamping precision grade collet with a TIR (Total Indicated runout) of l...

$23.95
Tumbnail: 1/4" ER-20 Collet for Spindles
 This collet will accept tools with a 1/4" (6.35mm) shank. This is a clamping precision grade collet with a TIR (Total Indicated runout) of l...

$23.95
Tumbnail: 1/8" ER-20 Collet for Spindles
 This collet will accept tools with a 1/8" (3.175mm) shank. This is a clamping precision grade collet with a TIR (Total Indicated runout) of ...

$25.95
Collet Care Lubricant / Spindle Cleaner Collet Care Lubricant - Spindle Cleaner
 Collet Care Lubricant and Spindle Cleaner. 118 ml bottle. Designed to clean and protect spindle collets.

$559.00
Tumbnail: 1.5 kW Spindle with Inverter - 110V - Assembly Included
 The blueChick v4.2 fully assembled CNC machine is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel dista...

$23.95
This is a 3/8 inch ER20 collet shown with a mechanical pencil for scale. 3/8" ER20 Collet for Spindles
This collet will accept tools with a 3/8" (9.525mm) shank. This is a clamping precision grade collet with a TIR (Total Indicated runout) of ...

$6.99
1pcs 8MM Nozzle Fitting
 This is the fitting for your water cooled spindle.

$10.99
2pcs 8MM Nozzle Fitting
 This is the fitting for your water cooled spindle.

$17.00
12mm 4 pin Non Threaded female connector main view 12mm 4 Pin NON-Threaded Spindle Connector
 This is a 4 pin threaded connector also a replacement for typical spindles used in CNC routers and CNC machines but can be used in many othe...

$147.78
Tumbnail: Z-Axis Assembly for the Porter Cable 7518The router diameter...
 If you need to collect the dust rather than having it fly all over the place, the z-axis assembly with dust shoe is a good choice. These ass...

$147.78
Tumbnail: Z-Axis Assembly for the Porter Cable 890
If you need to collect the dust rather than having it fly all over the place, the z-axis assembly with dust shoe is a good choice. These ass...

$249.00
VFD (Inverter) for 2.2kW Spindle 2.2kW Inverter - 220V (VFD)
 This is a 2.2 kilowatt Variable Frequency Drive (VFD or Inverter). The inverter max frequency is 400Hz . The inverter comes with an instruct...

$269.00 OUT OF STOCK
VFD (Inverter) for 2.2kW Spindle 2.2kW Inverter - 110V (VFD)
This is a 2.2 kilowatt Variable Frequency Drive (VFD or Inverter). The inverter max frequency is 400Hz . The inverter comes with an instruct...

$7,000.00
this is a picture of the greenBull CNC machine with a Laser/Spindle on the head. Assembled heavy Duty 4'X8' CNC Machine with Laser/Spindle Co...
 The first CNC machine with a spindle and a laser. Large format heavy duty 4'X8' or longer perfect for standard 4'x8' sheet. This machine off...

$5,000.00
this is a picture of the greenBull CNC machine with a Laser/Spindle on the head. Heavy Duty 4'X8' CNC Machine (KIT) with Laser/Spindle Combo
 The first CNC machine with a spindle and a laser. Large format heavy duty 4'X8' or longer perfect for standard 4'x8' sheet. This machine off...

$7.99
Back view of the male round threaded spindle conector Male Threaded Round Spindle Connector
 This is a 4 pin replacement connector that is found on the back of typical spindles.

$175.95
Tumbnail: 1.5kW Inverter (VFD) (220 Volt)
 This is a 1.5 kilowatt Variable Frequency Drive (VFD or Inverter) that accepts 220v single or three phase. The inverter max frequency is 400...

$185.95
Tumbnail: 1.5kW Inverter (VFD) (110 Volt)
This is a 1.5 kilowatt Variable Frequency Drive (VFD or Inverter) that accepts 220v single or three phase. The inverter max frequency is 400...

$15.85
female threaded spindle connector front view Female Round Threaded Spindle Connector.
 This is a 4 pin threaded connector also a replacement for typical spindles used in CNC routers and CNC machines but can be used in many othe...

$2149.00
Assembled blueChick 4.2 machine blueChick 12"x36" CNC Assembled Machine Parallel Version
The blueChick v4.2 fully assembled CNC machine is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel dista...

$2195.00
Assembled blueChick 4.2 machine blueChick 12"x36" CNC Assembled Machine - USB version
The blueChick v4.2 fully assembled CNC machine is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel dista...

$3499.00
Assembled blueChick 4.2 machine blueChick CNC - Parallel Version with redLeaf
The blueChick v4.2 fully assembled CNC machine is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel dista...

$3545.00
Assembled blueChick 4.2 machine blueChick CNC - USB Version with redLeaf
The blueChick v4.2 fully assembled CNC machine is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel dista...

$3349.99
Assembled blueChick 4.2 machine blueChick CNC Parallel Version with redSprout
 The blueChick v4.2 fully assembled CNC machine is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel dista...

$3405.00
Assembled blueChick 4.2 machine blueChick CNC - USB Version with redSprout
 The blueChick v4.2 fully assembled CNC machine is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel dista...

$2549.00
Assembled blueChick 4.2 machine blueChick CNC - Parallel version with redFly
 The blueChick v4.2 fully assembled CNC machine is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel dista...

$2595.00
Assembled blueChick 4.2 machine blueChick CNC - USB version with redFly
The blueChick v4.2 fully assembled CNC machine is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel dista...

$529.00
Tumbnail: 1.5kW Spindle with 110v Inverter
 The blueChick v4.2 is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel distances. The blueChick is perfe...

$429.00
Tumbnail: 1.5kW Spindle with 220v Inverter
The blueChick v4.2 is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel distances. The blueChick is perfe...

$5,500.00
Tumbnail: 5'x10' Heavy Duty CNC Machine Kit (greenBull 5X) - with 2.2k...
 The huge 5'x10' (greenBull 5X) has the ability to mill up to 5'x10' sheets, so if you're milling sheets that come wider than 4 feet, the 5X ...

$7,000.00
Tumbnail: 5'x10' Heavy Duty CNC Machine (greenBull 5X) with 2.2kW Spin...
 The huge 5'x10' (greenBull 5X) has the ability to mill up to 5'x10' sheets, so if you're milling sheets that come wider than 4 feet, the 5X ...

$4500.00
greenBull in our shop 4'x8' Heavy Duty CNC Machine Kit (greenBull 4X) - with 2.2kW...
 Perfect for standard 4'x8' sheets, the greenBull 4X Heavy Duty CNC machine is great for all you machining needs. Don't let the wooden struct...

$6,000.00
greenBull in our shop 4'x8' Heavy Duty CNC Machine (greenBull 4X) with 2.2kW Spind...
 Perfect for standard 4'x8' sheets, the greenBull 4X Heavy Duty CNC machine is great for all you machining needs. Don't let the wooden struct...

$8,500.00
Laser spindle combo 6'x12' Heavy Duty CNC Spindle/Laser Assembled.
 The greenBull 6X is a massive CNC featuring an enormous 6'x12' cutting area. Big jobs require big machinery and this bad boy is definitely u...

$7,000.00
Laser spindle combo 6'x12' Heavy Duty CNC Spindle/Laser (KIT)
 The greenBull 6X is a massive CNC featuring an enormous 6'x12' cutting area. Big jobs require big machinery and this bad boy is definitely u...

$0.80
Tumbnail: image of the 2 inch strip brush for the dust shoe for CNC Machines and CNC Routers 2" Strip Brush per inch (Backordered)
 Strip Brushes are really useful for aiding in the capture of dust and chips being ejected from the milling process on the CNC machine (the r...

$120
blackFoot/blackToe CNC router laser mounts blackFoot/blackToe CNC Laser Mounts
 Convert your blackFoot or blackToe to operate a laser instead of a spindle or router. These parts can be used to mount a laser to your black...

$1599.00
Tumbnail: 12"x36" CNC Machine Kit (blueChick v4.2) $1739.00 Sale Price...
 The blueChick v4.2 is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel distances. The blueChick is perfe...

$28.50
Tumbnail: Parallel Interface Board - 5 Axis Breakout Board with Relay
The blueChick v4.2 is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel distances. The blueChick is perfe...

$89.99
USB controller for CNC Machine Mach3 USB Interface
 The blueChick v4.2 is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel distances. The blueChick is perfe...

$199.99
1/4 End Mill Starter 5 Pack
The blueChick v4.2 is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel distances. The blueChick is perfe...

$30.00
Tumbnail: Limit Switches - 6 pack
The blueChick v4.2 is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel distances. The blueChick is perfe...

$22.50
Tumbnail: 4 Conductor 20 AWG - 15 feet (recommended)
The blueChick v4.2 is a desktop sized CNC machine that has a working area of 12"x36"x3" (X, Y and Z travel distances. The blueChick is perfe...

$6,500.00
greenbull in our shop 6'x12' Heavy Duty CNC Machine Kit (greenBull 6X) - with 2.2k...
 The greenBull 6X is a massive CNC featuring an enormous 6'x12' cutting area. Big jobs require big machinery and this bad boy is definitely u...

$8,000.00
greenbull in our shop 6'x12' Heavy Duty CNC Machine (greenBull 6X) with 2.2kW Spin...
 The greenBull 6X is a massive CNC featuring an enormous 6'x12' cutting area. Big jobs require big machinery and this bad boy is definitely u...

$4,500.00
Tumbnail: 4'x8' CNC Machine Kit (blackFoot v4.3) - w/ 2.2kW Spindle
The blackFoot 4'x8' CNC machine has a cutting area of 4 feet (48 inches/1219.2 mm) by 8 feet (96 inches/2438.4 mm). The machine is intended ...

$5,000.00
Tumbnail: 4'x8' CNC Machine Kit (blackFoot v4.3) w/ 2.2kW Spindle - As...
 The blackFoot 4'x8' CNC machine has a cutting area of 4 feet (48 inches/1219.2 mm) by 8 feet (96 inches/2438.4 mm). The machine is intended ...

$9,900.00
greenLean CNC Machine side view thumbnail greenLeanV2 Vertical CNC Machine Kit w/ 2.2kW Spindle
So you want a large format CNC but you're cramped for space. You're a small shop, or just a home-based business and you need a solution. We'...

$3130.00
Tumbnail: 2'x4' CNC Machine Kit (blackToe v4.1) w/ 2.2kW Spindle
A new toy for The Next Industrial Revolution!. Everyone with a garage (or a spare bedroom) can get serious with their creations on the cheap...

$3,999.00
Tumbnail: 2'x4' CNC Machine Kit (blackToe v4.1) - Assembled Machine w/...
 A new toy for The Next Industrial Revolution!. Everyone with a garage (or a spare bedroom) can get serious with their creations on the cheap...

$28.50
Tumbnail: 5 Axis Breakout Board with Relay. Out of stock.
 This breakout board will connect the parallel port of your computer to the drivers that drive the motors. A relay is featured on this board ...

$50.00
Dual fan and radiator for CNC spindles Dual Fan/Radiator
 Cool your CNC Spindle with this small dual fan and radiator.

$10.95
View of the input side of the 24VDC dual relay module 24VDC Dual Relay
 Control high powered devices with this dual 24V relay.

$470.00
Tumbnail: 4 Axis Electronics Combo w/ Parallel Breakout Board
 4 axes systems are generally used as follows: 3 axes for x, y and z, and the 4th axis would turn the work piece being milled, or to turn the...

$531.50
Tumbnail: 4 Axis Electronics Combo w/ Mach3 USB Board
4 axes systems are generally used as follows: 3 axes for x, y and z, and the 4th axis would turn the work piece being milled, or to turn the...

$596.80
Tumbnail: 4 Axis Electronics Combo w/ Pokeys57CNC Mach3 or Mach4 USB/E...
 4 axes systems are generally used as follows: 3 axes for x, y and z, and the 4th axis would turn the work piece being milled, or to turn the...

$429.00
Tumbnail: 4.0kW Inverter (VFD) (Out of Stock and No Longer Carried)
 This is a 4.0 kilowatt Variable Frequency Drive (VFD or Inverter)

$25.95
Tumbnail: Porter Cable 690 / 7500 Series without Nut
 This collet will accept tools with a 1/8" shank (the shank is the smooth part of the bit that is inserted into the collet). If you don't hav...

$50.95
Tumbnail: Porter Cable 690 / 7500 Series with Collet Nut
 This collet will accept tools with a 1/8" shank (the shank is the smooth part of the bit that is inserted into the collet). If you don't hav...

$25.95
Tumbnail: Bosch (1617/1618/1619) without Nut
 This collet will accept tools with a 1/8" shank (the shank is the smooth part of the bit that is inserted into the collet). If you don't hav...

$50.95
Tumbnail: Bosch (1617/1618/1619) with Collet Nut
 This collet will accept tools with a 1/8" shank (the shank is the smooth part of the bit that is inserted into the collet). If you don't hav...

$25.95 Out Of Stock
Tumbnail: Porter Cable 690 / 7500 Series Collet Nut
 These collets wouldn't be complete without the nut to fasten it on to the router. This nut must be used with these collets. NOTE: We no long...

$25.95 Out Of Stock
Tumbnail: Bosch (1617/1618/1619) Collet Nut
 These collets wouldn't be complete without the nut to fasten it on to the router. This nut must be used with these collets. NOTE: We no long...

$15.95
Tumbnail: Porter Cable 690 / 7500 Series Spanner Wrench
 This is the tool used to tighten the nut onto the router. The spanner wrench fits into the grooves shown at the front of the collet nut.

$15.95
Tumbnail: Bosch (1617/1618/1619) Spanner Wrench
 This is the tool used to tighten the nut onto the router. The spanner wrench fits into the grooves shown at the front of the collet nut.

$15.95
Tumbnail: Bosch (PR20EVSK) Spanner Wrench
 This is the tool used to tighten the nut onto the router. The spanner wrench fits into the grooves shown at the front of the collet nut.

$105.95
Tumbnail: Porter Cable Series 690 / 7500 Kit. Out of Stock
 Here is a kit with all of the collets (1/8", 1/4" and 1/2"), nut and spanner wrench. Additionally, this kit contains a cleaning and lubricat...

$105.95 Out of Stock
Tumbnail: Bosch (1617/1618/1619) Kit
 Here is a kit with all of the collets (1/8", 1/4" and 1/2"), nut and spanner wrench. Additionally, this kit contains a cleaning and lubricat...

$50.00
Fabricator Pro - Metal CNC Router Machine Fabricator Pro Laser and Spindle Mount Option
 Plans for the Fabricator Pro CNC router. The plans include a large set of 24"x36" plans with includes the Bill of Materials for the complete...

$20.00
Fabricator Pro - Metal CNC Router Machine Fabricator Pro Laser and Spindle Mount Option Digital Plans
 Plans for the Fabricator Pro CNC router. The plans include a large set of 24"x36" plans with includes the Bill of Materials for the complete...

$7,500.00
Laser spindle combo Assembled heavy duty 5'x10' CNC/Laser Machine.
 The GreenBull 5X has the ability to mill/laser up to 5'x10' sheets, so if you're using sheets that come wider than 4 feet, the 5X has that l...

$6,000.00
Laser spindle combo Heavy Duty 5'x10' CNC/Laser Machine KIT
The GreenBull 5X has the ability to mill/laser up to 5'x10' sheets, so if you're using sheets that come wider than 4 feet, the 5X has that l...

$590
greenLean CNC Machine side view thumbnail greenLeanV2 Plans
 So you want a large format CNC but you're cramped for space. You're a small shop, or just a home-based business and you need a solution. We'...

$320.00
Tumbnail: Table for 2'x4' CNC machine kit (blackToe v4.1)
A new toy for The Next Industrial Revolution!. Everyone with a garage (or a spare bedroom) can get serious with their creations on the cheap...

$250.00
standalong cnc controller main image DDCS v3.1 Standalone CNC Controller (No Pendant)
 Discover the DDCS Standalone CNC Controller, a cutting-edge solution for CNC machines and routers. This standalone system streamlines your C...

$379.00
standalong cnc controller main image DDCS v4.1 Standalone CNC Controller
 Discover the DDCS Standalone CNC Controller, a cutting-edge solution for CNC machines and routers. This standalone system streamlines your C...

$388.00
standalong cnc controller main image DDCS Expert 4-Axis (No MPG)
 Discover the DDCS Standalone CNC Controller, a cutting-edge solution for CNC machines and routers. This standalone system streamlines your C...

$465.00
standalong cnc controller main image DDCS Expert 4 Axis (with Handwheel)
 Discover the DDCS Standalone CNC Controller, a cutting-edge solution for CNC machines and routers. This standalone system streamlines your C...

$645.00
Fabricator Pro - Metal CNC Router Machine Fabricator Pro 4x8 Plans
 Our tough and rigid all metal 4'x8' (approximately 1200mm x 2400mm) CNC Router by BuildYourCNC. This CNC Router is exceptionally priced comp...

$14410.08
Fabricator Pro - Metal CNC Router Machine Fabricator Pro 4x8 Kit of Parts
 Our tough and rigid all metal 4'x8' (approximately 1200mm x 2400mm) CNC Router by BuildYourCNC. This CNC Router is exceptionally priced comp...

$16714.08
Fabricator Pro - Metal CNC Router Machine Fabricator Pro 5x10 Kit of Parts
 Our tough and rigid all metal 4'x8' (approximately 1200mm x 2400mm) CNC Router by BuildYourCNC. This CNC Router is exceptionally priced comp...

$19,018.08
Fabricator Pro - Metal CNC Router Machine Fabricator Pro 6x12 Kit of Parts
 Our tough and rigid all metal 4'x8' (approximately 1200mm x 2400mm) CNC Router by BuildYourCNC. This CNC Router is exceptionally priced comp...

$23446.08
Fabricator Pro - Metal CNC Router Machine Fabricator Pro 8x17 Kit of Parts
 Our tough and rigid all metal 4'x8' (approximately 1200mm x 2400mm) CNC Router by BuildYourCNC. This CNC Router is exceptionally priced comp...

$17160.08
Fabricator Pro - Metal CNC Router Machine view of the x rails and the z axis assembly with the CO2 laser attached Fabricator Pro 4x8 Kit of Parts with Laser
 Our tough and rigid all metal 4'x8' (approximately 1200mm x 2400mm) CNC Router by BuildYourCNC. This CNC Router is exceptionally priced comp...

$19464.08
Fabricator Pro - Metal CNC Router Machine view of the x rails and the z axis assembly with the CO2 laser attached Fabricator Pro 5x10 Kit of Parts with Laser
 Our tough and rigid all metal 4'x8' (approximately 1200mm x 2400mm) CNC Router by BuildYourCNC. This CNC Router is exceptionally priced comp...

$21768.08
Fabricator Pro - Metal CNC Router Machine view of the x rails and the z axis assembly with the CO2 laser attached Fabricator Pro 6x12 Kit of Parts with Laser
 Our tough and rigid all metal 4'x8' (approximately 1200mm x 2400mm) CNC Router by BuildYourCNC. This CNC Router is exceptionally priced comp...

$26196.08
Fabricator Pro - Metal CNC Router Machine view of the x rails and the z axis assembly with the CO2 laser attached Fabricator Pro 8x17 Kit of Parts with Laser
 Our tough and rigid all metal 4'x8' (approximately 1200mm x 2400mm) CNC Router by BuildYourCNC. This CNC Router is exceptionally priced comp...

$1200
CNC electronics cabinet for closed loop stepper motors and drivers Basic: No VFD will Reside in Cabinet
 Discover great performance with our Plug-and-Play CNC Control System, perfect for any CNC machine or router. Experience effortless plug-and-...

$1039.00
CNC electronics cabinet for closed loop stepper motors and drivers 4 Axis NEMA 34 1200 oz-in
 Discover great performance with our Plug-and-Play CNC Control System, perfect for any CNC machine or router. Experience effortless plug-and-...

$1420.00
CNC electronics cabinet for closed loop stepper motors and drivers 4 Axis Closed Loop NEMA 34 1600 oz-in
 Discover great performance with our Plug-and-Play CNC Control System, perfect for any CNC machine or router. Experience effortless plug-and-...

$169.00
Pokeys CNC Interface Board
 PoKeys57CNC Mach4 and Mach3 motor controller can control up to 8 STEP/DIR signal driven motors (stepper motors, servo drives, etc.) in vario...

$0.49
18/4 AWG Shielded stranded cable with insulation removed 18/4 SHIELDED Stranded Cable per Foot
 Use this SHIELDED 4 conductor 18 AWG stranded cable for signal level connection. This cable will be protected from interference

$62.25
1/4 1/4" x 1-1/4" Solid Carbide One Flute Downcut Super O Flute ...
 This Onsrud End Mill features a 1/4" solid carbide single flute downcut for plastic, wood, and aluminum cutting.

$44.85
1/4 1/4" by 3/4" Solid Carbide Single Flute Downcut Super O Flut...
 This Onsrud End Mill features a 1/4" solid carbide single flute downcut for plastic, wood, and aluminum cutting.

$89.99
Mach3 USB Interface Board Controller Mach3 USB CNC Interface
 This Mach3 USB Controller will run Mach3 through a standard USB port on a PC. You can use Windows 10 and older Windows version 32-bit or 64-...

$8397.25
greenBull V2 60 degree front view greenBull v2 4'x8' 60° CNC Router Kit
 Discover our user-friendly large format CNC Router kit. It sets you up for quickly creating cabinets, signs, and a myriad of other projects....

$9397.25
greenBullV2 CNC Router, size: 04x08, angle: 60 degree, f1: no 4th axis, f2: no laser gantry, f3: no laser on head greenBull v2 5'x10' 60° CNC Router Kit
 Discover our user-friendly large format CNC Router kit. It sets you up for quickly creating cabinets, signs, and a myriad of other projects....

$8397.25
greenBullV2 CNC Router, size: 04x08, angle: flat, f1: no 4th axis, f2: no laser gantry, f3: no laser on head greenBull v2 4'x8' flat CNC Router kit
 Discover our user-friendly large format CNC Router kit. It sets you up for quickly creating cabinets, signs, and a myriad of other projects....

$9397.25
greenBullV2 CNC Router, size: 05x10, angle: flat, f1: no 4th axis, f2: no laser gantry, f3: no laser on head greenBull v2 5'x10' flat CNC Router kit
 Discover our user-friendly large format CNC Router kit. It sets you up for quickly creating cabinets, signs, and a myriad of other projects....

$510.00
greenBullV2 CNC Router, size: 04x08, angle: flat, f1: no 4th axis, f2: no laser gantry, f3: no laser on head greenBullv2 4x8 Flat CNC Router Plans
 Elevate your woodworking and crafting game with our top-tier DIY CNC Router Plans. Designed for enthusiasts and professionals alike, these d...

$630.00
greenBullV2 CNC Router, size: 05x10, angle: flat, f1: no 4th axis, f2: no laser gantry, f3: no laser on head greenBullv2 5x10 Flat CNC Router Plans
 Elevate your woodworking and crafting game with our top-tier DIY CNC Router Plans. Designed for enthusiasts and professionals alike, these d...

$510.00
greenBullV2 CNC Router, size: 04x08, angle: 60 degree, f1: no 4th axis, f2: no laser gantry, f3: no laser on head greenBullv2 4x8 60° Plans
 Elevate your woodworking and crafting game with our top-tier DIY CNC Router Plans. Designed for enthusiasts and professionals alike, these d...

$630.00
greenBullV2 CNC Router, size: 04x08, angle: 60 degree, f1: no 4th axis, f2: no laser gantry, f3: no laser on head greenBullv2 5x10 60° Plans
 Elevate your woodworking and crafting game with our top-tier DIY CNC Router Plans. Designed for enthusiasts and professionals alike, these d...

$50.00
greenBullV2 CNC Router, size: 04x08, angle: 60 degree, f1: no 4th axis, f2: with laser gantry, f3: no laser on head greenBullv2 Laser Gantry Paper Plans Flat or 60°
 Elevate your woodworking and crafting game with our top-tier DIY CNC Router Plans. Designed for enthusiasts and professionals alike, these d...

$10.00
greenBullV2 CNC Router, size: 04x08, angle: 60 degree, f1: no 4th axis, f2: with laser gantry, f3: no laser on head greenBullv2 Laser Gantry Digital Plans Flat or 60°
 Elevate your woodworking and crafting game with our top-tier DIY CNC Router Plans. Designed for enthusiasts and professionals alike, these d...

$90.00
greenBullV2 CNC Router, size: 04x08, angle: flat, f1: no 4th axis, f2: no laser gantry, f3: no laser on head greenBullv2 Digital Plans 4x8 Flat
 Elevate your woodworking and crafting game with our top-tier DIY CNC Router Plans. Designed for enthusiasts and professionals alike, these d...

$95.00
greenBullV2 CNC Router, size: 05x10, angle: flat, f1: no 4th axis, f2: no laser gantry, f3: no laser on head greenBullv2 Digital Plans 5x10 Flat
 Elevate your woodworking and crafting game with our top-tier DIY CNC Router Plans. Designed for enthusiasts and professionals alike, these d...

$90.00
greenBullV2 CNC Router, size: 04x08, angle: 60 degree, f1: no 4th axis, f2: no laser gantry, f3: no laser on head greenBullv2 4x8 60° Digital Plans
 Elevate your woodworking and crafting game with our top-tier DIY CNC Router Plans. Designed for enthusiasts and professionals alike, these d...

$100.00
greenBullV2 CNC Router, size: 04x08, angle: 60 degree, f1: no 4th axis, f2: no laser gantry, f3: no laser on head greenBullv2 5x10 60° Digital Plans
 Elevate your woodworking and crafting game with our top-tier DIY CNC Router Plans. Designed for enthusiasts and professionals alike, these d...

$521.00
Tumbnail: 3 Axis Heavy Gantry Electronics w/ Mach3 USB Board
This bundle would be used in cases where there is one stronger motor needed. In most cases, this larger motor is used to move the gantry as ...

$587.01
3 Axis Heavy Gantry Electronics /w Pokeys57CNC controller (M...
 This bundle would be used in cases where there is one stronger motor needed. In most cases, this larger motor is used to move the gantry as ...

$92.40
Tumbnail: (60-113MW) Onsrud Compression End Mill - Cut Length - 7/8 in...
 A combination upcut and downcut end mill cutter for best quality on the top and bottom edges of the material being cut. Very High Quality En...

$97.30
Tumbnail: (65-026) Onsrud Super 'O' Cut and Shank Diameter: 1/4" (6.35...
 This is a very high quality end mill for cutting plastics, wood and aluminum. Will create a flat bottom surface Cut Diameter - 1/4 inch or 6...

$79.65
Tumbnail: (65-025) Onsrud Super 'O' Cut and Shank Diameter: 1/4" (6.35...
 This is a very high quality end mill for cutting plastics, wood and aluminum. Will create a flat bottom surface Cut Diameter - 1/4 inch or 6...

$249.50
D2 Drag Knife - with mechanical pencil for scale. Drag Knife - Tangential CNC Knife - D2 for 1/2" Collet
The Donek Tools Drag Knife allows you to cut a wide array of things you would normally use a utility knife for, but with the precision of CN...

$249.50
D2 Drag Knife - with mechanical pencil for scale. Drag Knife - Tangential CNC Knife - D4 for 1/4" Collet
The Donek Tools Drag Knife allows you to cut a wide array of things you would normally use a utility knife for, but with the precision of CN...

$75.17
Onsrud 1/4 Onsrud 1/4" diameter 1" cut length end mill (Extended Shank ...
 Onsrud 1/4" Solid Carbide Two Flute UpCut Ballnose End Mill for Plastics, Solid Surface, Aluminum, and Wood. Shank: 1/4", Cut Diameter: 1/4"...

$72.65
Onsrud 1/4 Onsrud 1/4" diameter 7/8" cut length end mill
 Onsrud 1/4" Solid Carbide Two Flute UpCut Ballnose End Mill for Plastics, Solid Surface, Aluminum, and Wood. Shank: 1/4", Cut Diameter: 1/4"...

$169.90
primary thumbnail of LMT Onsrud 67-211 Solid Carbide Upcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000 LMT Onsrud 67-211
 LMT Onsrud 67-211 LMT Onsrud 67-211 Solid Carbide Upcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3....

$138.10
primary thumbnail of LMT Onsrud 67-206 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000 LMT Onsrud 67-206
 LMT Onsrud 67-206 LMT Onsrud 67-206 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, ...

$201.55
primary thumbnail of LMT Onsrud 67-215 Solid Carbide Upcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.0000 LMT Onsrud 67-215
 LMT Onsrud 67-215 LMT Onsrud 67-215 Solid Carbide Upcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4....

$160.90
primary thumbnail of LMT Onsrud 67-212 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000 LMT Onsrud 67-212
 LMT Onsrud 67-212 LMT Onsrud 67-212 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, ...

$138.10
primary thumbnail of LMT Onsrud 67-205 Solid Carbide Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000 LMT Onsrud 67-205
 LMT Onsrud 67-205 LMT Onsrud 67-205 Solid Carbide Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" ...

$201.55
primary thumbnail of LMT Onsrud 67-216 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000 LMT Onsrud 67-216
 LMT Onsrud 67-216 LMT Onsrud 67-216 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, ...

$0.29
22/2 Shielded Stranded Cable with insulation removed 22/2 SHIELDED stranded Cable per Foot
 Use this SHIELDED 2 conductor 22 AWG stranded cable for signal level connection. This cable will be protected from interference
Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.
© 2020 PHD Robotics, LLC. dba BuildYourCNC.com All rights reserved. Established 2008
abf759c8-c61c-4994-bc0d-889cb8398888