• Tumbnail:
1 1

BuildYourCNC

DB25 Stecker auf DB25 Buchse Parallelkabel

DB25 Stecker auf DB25 Buchse Parallelkabel

$15.99 USD
$15.99 USD
Sale Ausverkauft
Versand wird beim Checkout berechnet
Titel
Dies ist das Kabel, das die Signale vom Computer zur CNC-Elektronik überträgt. Wenn sich auf der Rückseite Ihres Computers ein 25-poliger Buchsenanschluss befindet und die Breakout-Platine einen Stecker hat, dann ist dies das richtige Kabel für Sie. Eigenschaften: Direkte Durchgangsverbindung für jeden Pin, geschirmt, 2,0 Meter lang, beige Farbe, bleifrei und RoHS-konform. Erweitert die DB25-Verbindung auf jedes DB25-Stecker-Port-Gerät.
Durchgangskabel
Unterstützt alle parallelen und seriellen Anwendungen
Angepasste Impedanz
PVC-Mantel
Geformte Enden mit Rändelschrauben
Innenhaube 360 Grad an den Stecker gelötet / komplette End-to-End-Abschirmung.
Anschlüsse: DB25 Stecker auf Buchse
Länge: 6ft
Vollständige Details anzeigen

Questions & Answers

Have a Question?

Ask a Question

  • The online Blacktooth assembly instructions in step 16 show how to connect the LED headers to strands of ethernet wires. The terminal used to connect to the header is shown in the picture, but it does not state what the part number is. Is the connector to be used part number 20170 labeled "Two pin 2P SIL Housing"?

    Yes, the header on the black LED panel used on the blackTooth uses the 2P sil housing into which two crimp pins will be inserted. The crimp pins will need to be crimped onto the ends of the ethernet cable wires. Additional Information:

  • Is my last order shipped or not? I got one email saying it was shipped, another saying it was out of stock. Transaction ID ETYPB70EBCBD

    For questions related to shipping, please call us and we will provide a status of your shipment, or you can use your tracking number to determine the status from the carrier. The tracking number is in the email we sent.

  • Hi I have a Proxxon MF70, I want to add 3axis stepper with controller and software by USB. Can you suggest a kit for me? Thanks.

    To implement a electronics combo to run you Proxxon MF70, you will need to find the correct drive components (ACME screw, linear rail, etc) and look into any specific modifications needed to your rig. I would recommend the USB 3 Axis Large Motors Electronics w/ USB Interface Board. Since the machine is metal, our larger motors would be highly recommended. We have not done this conversion, through research is recommended. Additional Information: Additional Information: Additional Information: