[ Log In ]
[ Register ]

Question #: 15055

Question: [4'x8' Heavy Duty CNC Machine with Laser] I want this to be 12' long. how much does that cost?

Current Solution

Machine sizes outside of what is selectable on the home page, or the machine product page require a special quote. You can text me at 832-477-0526 for a quote on a unique configuration.

Respond:

Other Possible Solutions to this Question

  • I ordered a Mach3 license to be delivered by email, how long does that take to receive ?

    Mach3 license purchases are processed during our working hours of 9 AM - 5 PM Central Standard Time, Monday through Friday. If you order after hours, licensed will generally be sent to your email address the following morning.

    Click the link to add information to this solution:
    I ordered a Mach3 license to be delivered by email, how long does that take to receive ?

  • Can you preset an origin point on this cnc? How long does it take to jog over? (If I have the case that I using the same thickness of maple wood, and same jig everytime)?

    Yes, you can preset an origin by zeroing the machine at the desired location before beginning your work. You can return to that exact point at any time, or you can specify an offset from that point to be the beginning point for the next machine operation (for instance when cutting several parts from one sheet of wood.) Jogging time varies by machine and application but would generally be a rapid move -- our default rapid setting is 400 inches per minute.

    Click the link to add information to this solution:
    Can you preset an origin point on this cnc? How long does it take to jog over? (If I have the case that I using the same thickness of maple wood, and same jig everytime)?

  • I want to fix the tramming issue, how can I measure this

    You can measure the tramming angle by putting a long L shaped rod that will fit into the spindle's collet and affix a piece that will tough the table to the other end of the rod. Rotate the rod to determine how far out you are. The longer the rod, the more accurate the measurement will be.

    Click the link to add information to this solution:
    I want to fix the tramming issue, how can I measure this

  • I want to buy a 59-inch acme screw, how many units is that?

    When ordering our ACME lead screws, you will enter the total length required in the quantity box. Note that it is sold in inches and the highest single length available is 78". We can cut any size to your specifications. If you require separate lengths, please order the total quality and then email us with your specific lengths desired.

    Email: customerservice@buildyourcnc.com (for length requests with purchased orders)

    Click the link to add information to this solution:
    I want to buy a 59-inch acme screw, how many units is that?

  • How long does it take to ship to Israel 3 nema 11 stepper motors ?

    Unfortunately I am not able to give an estimate of shipping time. This is because there are multiple shipping options, Some of them cost more than others, but ensure the package arrives in a certain number of days. Others do not give a number of days, and many factors could change the length of shipping time, such as weather, or busy season. It would be best to choose an option you are comfortable with the price of, and then Google search the typical times it takes for that option to get to you, or call the shipping company and request that estimated time from them.

    Click the link to add information to this solution:
    How long does it take to ship to Israel 3 nema 11 stepper motors ?

  • Dear Sir or Madam, I wonder how much the greenbull 5x shipping will cost to Lebanon.

    To determine the shipping cost of a machine (i.e. greenBull 5x):

    - You can add the greenBull 5x to the cart by going to the machine page and clicking on the add to cart button

    - In the checkout process, enter your address and then click on get shipping rates. You will be presented by a list of shipping costs to your location.

    Click the link to add information to this solution:
    Dear Sir or Madam, I wonder how much the greenbull 5x shipping will cost to Lebanon.

  • How long does it take to receive the CamBam license I ordered? I purchased it yesterday 1/30/18

    I will check

    Additional Information:
    The license was purchased and the developer is sending you the license shortly.

    Click the link to add information to this solution:
    How long does it take to receive the CamBam license I ordered? I purchased it yesterday 1/30/18

  • HOW LONG DOES IT TAKE TO SHIP

    Unfortunately I am not able to give an estimate of shipping time. This is because there are multiple shipping options, Some of them cost more than others, but ensure the package arrives in a certain number of days. Others do not give a number of days, and many factors could change the length of shipping time, such as weather, or busy season. It would be best to choose an option you are comfortable with the price of, and then Google search the typical times it takes for that option to get to you, or call the shipping company and request that estimated time from them.

    Additional Information:

    Click the link to add information to this solution:
    HOW LONG DOES IT TAKE TO SHIP

  • DO YOU HAVE BLACKTOE MACHINES WITH TABLES READY TO GO OR HOW LONG DOES IT TAKE MAKE ONE?

    Yes, we have the optional table for the blackToe, but we need to fabricate it, which only takes one day. We generally reserve one week for the total fabrication and packing of all parts.

    Click the link to add information to this solution:
    DO YOU HAVE BLACKTOE MACHINES WITH TABLES READY TO GO OR HOW LONG DOES IT TAKE MAKE ONE?

  • HOW LONG DOES IMMUNITY FROM INFLUENZA (FLU) VACCINE LAST?

    Protection from influenza vaccine is thought to persist for a year or less because of waning antibody and because of changes in the circulating influenza virus from year to year.

    Click the link to add information to this solution:
    HOW LONG DOES IMMUNITY FROM INFLUENZA (FLU) VACCINE LAST?

  • I ordered a 2.2kW spindle as a guest on March 3rd. How long does it take for you to provide shipping information?

    I will check

    Additional Information:
    The license was purchased and the developer is sending you the license shortly.

    Click the link to add information to this solution:
    I ordered a 2.2kW spindle as a guest on March 3rd. How long does it take for you to provide shipping information?

  • Hello, I purchased a cnc kit 3 days ago and I would like to know how long does it take to prepare a shipment? thanks

    CNC kits normally take 5-7 business days but during busy periods this can increase.

    Click the link to add information to this solution:
    Hello, I purchased a cnc kit 3 days ago and I would like to know how long does it take to prepare a shipment? thanks

  • Hello I just want to ask, is this machines can milling Aluminum?

    Our machines can mill aluminum, we have only tested with thin aluminum sheets. But milling aluminum is no problem with our machines, here is a video we recently did with our gB 4'x8' the aluminum piece is about 1/4" thick: https://buildyourcnc.com/tutorials/tutorial-greenbull-aluminum-cutting

    Click the link to add information to this solution:
    Hello I just want to ask, is this machines can milling Aluminum?

  • [575] How many Amps can the output handle? My SGR pulls 2.6 Amps so I need to know if the output can handle that much.

    The Mach3 USB Interface Board is designed to handle an output current of 50mA. These outputs are generally not suitable for heavy loads like Spindle Governor Relays (SGRs)​​. Given that your SGR pulls 2.6 Amps, it exceeds the capacity of the Mach3 USB Interface Board's output. Therefore, directly switching the SGR using the Mach3 USB Interface Board is not advisable. Instead, using your existing C36 rev1.1 board as an intermediary would be the recommended approach. This board can handle higher currents and will act as a buffer, protecting the Mach3 USB Interface Board from being overwhelmed by the higher current demand of your SGR.

    Click the link to add information to this solution:
    [575] How many Amps can the output handle? My SGR pulls 2.6 Amps so I need to know if the output can handle that much.

  • [244] I accidentally put 12vdc to the controller and now the display does not work. Can this be repaired?

    The 12VDC applied to the input voltage terminals most likely damaged the microcontroller, the LCD, and the vacuum sensor. It can be repaired, but the repair will cost more than a new vacuum pressure controller.

    Click the link to add information to this solution:
    [244] I accidentally put 12vdc to the controller and now the display does not work. Can this be repaired?

  • I am interested in buying the water cooled 2.2 KW spindle for $339, how much does it weigh?

    The weight of the 2.2kW spindle without the VFD (variable frequency drive or inverter) is 11 lbs or 5 kg.

    The 2.2kW spindle with the VFD is 15 lbs or 6.8 kg.

    Additional Information:

    Click the link to add information to this solution:
    I am interested in buying the water cooled 2.2 KW spindle for $339, how much does it weigh?

  • AM NOT SURE HOW TO SET THE Z AXIS TURN ON/OFF LASER WHEN CREATE CODE. KNOW THAT ITS TYPICALLY Z-AXIS MOVEMENT DOES THIS - BUT YOU DONT SHOW ANYTHING HOOKED UP IN PLACE OF AXIS.

    When the z axis is going down, the laser turns on. When the z axis is going up, it turns off. The z axis directions is only a signal that is either 5v or 0v. That determines the direction. In vectric, you will need to set your machining operations with a very very small depth so the time it takes to get to its final depth is a very short time.

    Click the link to add information to this solution:
    AM NOT SURE HOW TO SET THE Z AXIS TURN ON/OFF LASER WHEN CREATE CODE. KNOW THAT ITS TYPICALLY Z-AXIS MOVEMENT DOES THIS - BUT YOU DONT SHOW ANYTHING HOOKED UP IN PLACE OF AXIS.

  • WHAT SIZE WRENCHES DOES THIS SPINDLE TAKE TO TIGHTEN?

    To loosen and tighten the collet nut for the 2.2kW spindle, I use a 22mm wrench (spanner) for the shaft and a 30mm wrench for the nut.

    Click the link to add information to this solution:
    WHAT SIZE WRENCHES DOES THIS SPINDLE TAKE TO TIGHTEN?

  • how long should I expect a team of 2 to assemble and get it running?

    You will need to build the table unit for your machine. There are instructions on how to do this at the bottom of the product page here, https://www.buildyourcnc.com/Item/cnc-machine-blackFoot-v4
    There is no estimate on how much this will cost though, since there are too many variables involved to do this.

    - PC with parallel port and USB port
    - 20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
    - 18awg stranded wires for power supply to drivers
    - 24awg stranded wires for breakout board to drivers
    (location and spacing of components varies from one person to another, so we do not provide cables/wires)
    - General purpose extension cord (cut the female end off) to provide power to power supply
    - USB cable to power breakout board
    - Parallel cable to communicate to breakout board
    - Router
    - (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
    - (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
    - End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
    - CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
    - CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx

    This answer is applicable to most of our machines with the exception of the greenLean and the blueChick since those machines are equipped with a table structure.

    Additional Information:



    Additional Information:



    Additional Information:

    Click the link to add information to this solution:
    how long should I expect a team of 2 to assemble and get it running?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.