Sure, email me at customerservice@buildyourcnc.com and I will send you a replacement for a minimal fee. I now use HDPE for that part. The HDPE holds up much better.

Click the link to add information to this solution:
I have a Blackfoot 4x4 v2 chain drive. my Y plate is broken . do you sell just the Y plate or can I buy just the Y plate spec plan? I love this machine Its great. my name is Jeff Krug I bought the complete package and electronics from you guys. thanks

You will need to build the table unit for your machine. There are instructions on how to do this at the bottom of the product page here, https://www.buildyourcnc.com/Item/cnc-machine-blackFoot-v4
There is no estimate on how much this will cost though, since there are too many variables involved to do this.

- PC with parallel port and USB port
- 20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
- 18awg stranded wires for power supply to drivers
- 24awg stranded wires for breakout board to drivers
(location and spacing of components varies from one person to another, so we do not provide cables/wires)
- General purpose extension cord (cut the female end off) to provide power to power supply
- USB cable to power breakout board
- Parallel cable to communicate to breakout board
- Router
- (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
- (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
- End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
- CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
- CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx

This answer is applicable to most of our machines with the exception of the greenLean and the blueChick since those machines are equipped with a table structure.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I just wanted to know what I can expect to pay to build the blackFoot 4'x8' CNC machine, excluding computer, software and router? Is the kit complete or do I have to purchase additional items to finish?

If you purchase the assembled machine (which we highly recommend since you are outside the US) the entire system is tested, so you will not need any replacement parts. We have used motors and spindles on our machines that work constantly and daily for many years. These items still work to this day.

Click the link to add information to this solution:
Dear Sir or Madam, I'm looking for high quality and reliable CNC for my shop and I can find that the greenbull 5x is suitable for me. Would you please clarify where the hardware items are made, and how reliable will the greenbull be. Take into consideration that I'm outside the US, so buying spare parts from you should be planned long before and unexpected maintenance would stop our work.

In regards to getting a complete plug and go system, there are a lot of items to consider.
Electronics, DYI or one of our electronics kits that come assembled and tested?
Cable for the motors is a additional purchase, spindle? = silicone tubing/water pump, etc.
Cable carrier (wire management), software (also additional purchase).

We can view your cart, but please send us your email and username to customerservice@buildyourcnc.com so it will remain secure!

Click the link to add information to this solution:
I want to by a 5 by 10 foot kit, sorry, I don't have the time to read everything here. what should I be thinking about, Can you veiw my cart and tell me what else I need to get?

Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens and nozzle. You will also need some mechanical parts and some motors, drivers and power supplies for the drivers and the controller.

Additional Information:
Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens and nozzle. You will also need some mechanical parts and some motors, drivers and power supplies for the drivers and the controller.

Click the link to add information to this solution:
I'm interested in getting the CO2 laser & Spindle for my Blackfoot - I currently have just the router mount. Do you sell complete kits or can you advise on what I need? Thank you

Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens, and nozzle. You will also need some mechanical parts and some motors, drivers, and power supplies for the drivers and the controller.

Click the link to add information to this solution:
I'm interested in getting the CO2 laser & Spindle for my Blackfoot - I currently have just the router mount. Do you sell complete kits or can you advise on what I need? Thank you

For a special request that entails modifying the components of a kit and replace with specific components, you should call the office at 281-815-7701

Click the link to add information to this solution:
Would like to purchase variation of Blackfoot 4'x8' , I would like to leave out the structure, add two 1/2"-1/4" couplers and switch to 1/4" drive sprockets for the X axis, and finally use two 3/8" drive screws instead of one 1/2". How should I proceed?

Only our greenBull CNC machines will be able to use the long Z-axis, due to structural construction of the greenBull over the blackFoot.
The height from the table top to the bottom of the gantry is: 4.25"

Both the maximum cutting height and diameter, will be dependent on the specific end mill/router bit you plan on using, since they can vary in length.
The maximum cutting height (useful to engrave or cut material)is: with spoil-board 3.875", without a spoil-board is 4.625"
The maximum diameter will (estimated) is: 3"

Specifically dealing with our greenBull long Z-axis CNC machines, depending on how you specifically design the table you can have more cutting height and a larger diameter clearance. If you only create a frame for the machine with a hollow center(adjustable midsection), allowing you to have a greater clearance.
Similar table image here: (https://buildyourcnc.com/Item/cnc-machine-greenBull-v4-6X#prettyPhoto/5/)

Click the link to add information to this solution:
I can't spot the differences between 4'x8' blackFoot and the 4'x8' greenBull (except for laser head option): please, can you tell me?

WE don't have an actual file that contains the instructions for the machines as they are a part of a larger database file that is queried during the product page's rendering in the browser. The best option would be to print the webpage on a printer and use that as notes.

I know this will not provide larger images, but you could use the paper version to write your notes while assembling the machine using the larger images on the website.

Click the link to add information to this solution:
On the blackFoot 4'x8' CNC machine do you have the instructions under one file that I can download, I want to print them out and make notes as I am building the machine.

These are the recommend values(default) for our blackFoot CNC machine, the acceleration and velocity can be adjusted as high as the motor can rotate without stalling! Suggested increment's will be by 10's.

blackFoot:
X-axis
“CW8060 (6.0A) Driver”
Set to 1/16 Microstep, 5.43A
Dipswitches: 01100110 (“0”=down, “1”=up)
Motor Tuning: 914.29 steps/in, Velocity 400.02, Acceleration 4

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Motor Tuning: 1422.22 steps/in, Velocity 400.02, Acceleration 4

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Motor Tuning: 1600 steps/in, Velocity 79.98, Acceleration 5

Additional Information:
Thanks! What about step and direction config? I have:
Step time: 2000ns
Step space: 8000ns
Direction hold: 5000ns
Direction Setup: 5000ns

Click the link to add information to this solution:
I am configuring a blackfoot with 1 CW8060 and 2 CW230's with linuxcnc and cannot figure out the proper settings for stepconf. Can you provide the default settings that should work with these motors?

The overall size of the machine, really depends on both the area available to you and also the overall size of material being used. Now our larger machines (blackFoot, greenBull, greenLean) can cut all the materials mentioned above, and if equipped with our 2.2kW spindle you will be accurate up to ten thousandths of an inch.
Our greenBull machine does have an option for a long-z axis, that was especially designed to cut foam, but depending on the overall size it might not be a requirement for the specified request.

Click the link to add information to this solution:
I HAVE A SIGN SHOP AND WE NEED CUT ALUMINUM, PLEXIGASS, FOAM AND OTHER MATERIALS FOR SIGNS. CAN YOU TELL ME WHAT MACHINE WE NEED? I LOOKING 4'X8' OR 5' X 10'

That is correct. We send the fewer ribs than could be fastened within the gantry. One reduction of a rib will provide more space for the motor at the midpoint of the gantry and at the other side of the gantry (opposite the motor) can be reduced to provide more space to work with the coupling.

Click the link to add information to this solution:
I'm assembling the gantry for a 5x10 greenbull and noticed that there are 9 spaces for torsion spacers but only 7 in the kit. Should I just space them out on the right side behind the motor?

We currently cannot release or sell any plans at this current moment! We apologize for this inconvenience, however if you email us at customerservice@buildyourcnc.com. We can help you get the current parts you will need, for a fully functional 2.2kW z-axis assembly.

Click the link to add information to this solution:
I purachased a bluechick from you in 2011. I am upgrading from a Porter-cable router to a 2.2kw spindle. Can you supply me with drawings for the spindle mount so that I can cut the parts?

Please contact sales@buildyourcnc.com for a custom quote.

Click the link to add information to this solution:
I want to build a 4 x 4 plasma table. I am not good with the electronic parts of the system. What would you recommend as a turn key electronics package? I also want to build it with chain drive

We recommend our electronics combo for the scratch build kit, which you can find on our site here: https://buildyourcnc.com/item/electronicsAndMotors-3axis-425-elcombo. This is our standard general purpose 3 axis electronics system, and includes (3) NEMA 24 425 oz-in stepping motors, (3) Drivers (3.0Amp 24-40 Volts, with 1-1/64 microstepping), (1) 36v 8.8a Power Supply, (1) Interface Board either USB or Parallel. (The USB version requires PlanetCNC software; the parallel interface board gives you a variety of options, Mach3 being one popular choice.)

Click the link to add information to this solution:
I got the plans and hardware from you guys and im almost ready for the stepper motor part of this build. what size motors are good to use for this build? the size of cnc will be 2x4 when finish or what size will not work? thanks

We are working on a keypad that will connect to the USB interface. It is possible to create a quick keypad using perf-board and some push buttons. All you need to do is connect one side of the switch to the pin of the axis and direction and the other side of the push button to the 5v pin. The datasheet shows the pinout of the jog connector.

Additional Information:
I had found the pins to wire in a job connector. My question is, what sort of connector do I look for (on Amazon for example) that will work for each 2 pin pair? I suspect they are the same as the connector for power and reset on my computer's motherboard, but I have no idea what to look for (what to buy).
thanks.

Additional Information:
20

Click the link to add information to this solution:
I need to find a connector(s) to wire a pushbutton array to the USB board I purchased. Do you sell such a connector. Can you tell me what to look for?/What such a connector is called?

CamBam specifically creates the g-code (machining operations) instructions to be loaded into Mach3. Make sure in your CamBam g-code file parameters, you are using the Mach3 post processor. If you have already done this, let me know. If you are not sure how to do this, let me know.

Click the link to add information to this solution:
I am having trouble connecting the cambam program with my Mach3 to my 4X8 Blackfoot CNC machine. Where can I get help on this issue. Have had my machine since 2015 and have not been able to use it. Thank you

If the computer has been tested to be functional, it is most likely the breakout board which is faulty. Replace the breakout board and it should solve these issues.

Click the link to add information to this solution:
My blackfoot 4x8 Starts sending erratic commands to the machine randomly in the middle of a program or freezes altogether. Replaced USB Cable, updated software, updated firmware, tried other computers. What else should I do?

What we intend our customers to use for wiring the motors to the drivers will be 4 conductor 20 AWG cable, now for the PSU to Drivers; 16-18 Gauge wire should be used, and drivers to BB(Breakout Board) should be a 24 AWG wires.

Click the link to add information to this solution:
In my 4'x8' Blackfoot rig, there is a maximum wire length of 16" between drivers, breakout board, and power supply as well as a maximum wire length of 10' from drivers to motors. What AWG wires should I use to connect power supply to drivers, drivers to motors, and drivers to breakout board?