We currently only stock 2 start lead screw for the 3/8".

Click the link to add information to this solution:
looking for 5 start lead screw 3/8 4 feet long i need 2 of them

If the turns per inch on a lead screw is different, then the nut on the lead screw will move at a different velocity.

Additional Information:
Let me explain in more detail.

Let's say you have two lead screws:

- 1/2" 5 starts at 10 TPI = 2 turns per inch. (5 starts / 10 TPI = 1/2 inches per turn or 10 TPI / 5 Starts = 2 turns per inch.)

- 3/8" 2 starts at 10 TPI = 5 turns per inch. (2 starts / 10 TPI = 1/5 inches per turn or 10 TPI / 2 starts = 5 turns per inch.)


So, if two stepper motors (one connected to the 1/2" lead screw and the other connected to the 3/8" lead screw) turned 10 revolutions in 2 seconds, the 1/2" lead nut would travel 5 inches and the 3/8" lead nut would travel 2 inches at the 2 second mark.

Click the link to add information to this solution:
If I buy the 1/2" 5 start lead screw and the 3/8" 5 start lead screws will it all work together

We have these spindles here: https://buildyourcnc.com/category/2!2kw

Additional Information:


Additional Information:
The 110v versions will be available soon.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I'm looking for a 110v Er20 collet spindle

We currently do not have that specific antibacklash nut available for sale. Please check back regularly since we are always updating our stock, and finding new items to add to our current stock regularly.

Additional Information:
3/8 8start

Click the link to add information to this solution:
Do you sell acme 1/2-8, 8 start antibacklash nuts and thread clamps?

It is possible to connect and configure the spindle VFD to the mach3 via an RS485 communication and protocol.

The first thing you will need is the dynamic link library to pair with mach3 called the Huanyang VFD Mach3 PlugIn. You can find this file at the mach3 support forum here: http://www.machsupport.com/forum/index.php/topic,14182.0.html

You will also need to download the Microsoft .net 3.5 framework and install it: https://www.microsoft.com/en-us/download/details.aspx?id=21

Follow the pdf that comes with the library file, but here is a synopsis of what you need to do (I also added a lot more information that may be useful during this process as the manual does not cover the main connections that need to be done):

You will need to program your VFD so that it knows how to communicate with mach3 and the computer (go into the programming mode of the VFD and change these parameters):
- PD001 - value 2 - Enables with communication aspect of the VFD
- PD002 - value 2 - Enables frequency control from the communcations port
- PD163 - value 1 - VFD address
- PD164 - value 1 - Baud rate of 9600 (speed of the communication)
- PD165 - value 3 - 8N1 RTU - 8 bits (that's the size of the word that gets communicated), N (No parity or no error checking) and 1 (1 stop bit)

Copy the dll file to the PlugIns folder of mach3.

Connect the RX and TX lines to your computer. There are a couple ways you can do this, but the recommended way would be to use an FTDI USB device which converts a USB to a serial com port. The device will have Rx and Tx connectors to connect to the VFD terminals with the same labels. This method is recommended since serial ports are not as common in computers these days.

Next, you will need to configure mach3 to use the plugin library. Start mach3 and click on Menu -> config ->Config Plugins. Enable the new plugin by clicking on the red cross on the left column next to the plug in. Restart mach3 after doing this.

No you need to configure mach3 to use the HuanyangVFD plugin. Go to the ports & pins configuration and select the spindle setup tab. Make sure that the Disable Spindle Relays checkbox is unchecked. We don't want mach3 to output a signal for a relay since the spindle will start up and turn off within the VFD and not from an external relay.

Next, go to the HuanyangVFD settings by clicking on Menu -> plugin control -> HuanyangVFD. Set the parameters to the same settings you put into the VFD programming. The com port will be shown as new hardward when you plug in the USB FTDI device. A little bubble will be displayed at the bottom right where it will notify you that a new device is being installed (be patient while windows assigns a com port). Alternatively, you can use the windows device manager to see which port was set for the new USB FTDI device). You may need to restart mach3 several times until you get the correct information displayed in the PD001 and PD002 fields. When the com port is correct and the other parameters, like baud and VFD address is the same as you entered in the programming, then the PD001 and PD002 will show the number 2, otherwise, a 99 will appear which means that communication was not successful.

You can now control the on/off and RPM of the spindle using the RS485 communication between mach3 and the VFD.

Additional Information:
Will this work with the brand called "best "vfd as well.

Additional Information:
Where Can i find vfd plug-in for yl-620a for mach3 MODBUS?

Additional Information:
Once you connect the RS485 to MAch 3 and make all the connections, will MAch 3 automatically turn the spindle on when you start a cut file?

Click the link to add information to this solution:
looking for wiring schematic for redleaf electronics to huijang yl600 VFD 110v, 2.2k, thanks!

Stepper motors are designed to move in specific increments; these increments are called "steps". For example, a common standard is for 200 steps per full revolution. Microstepping is a method to send signals to the motor to move only a fraction of a full step at a time. For example, if a motor has 200 steps per revolution and is microstepped 1/16, then effectively there are 3200 small step movements (microsteps) per revolution instead of 200 larger ones. This makes the motion of the motor much smoother and more precisely controllable, at the cost of decreased holding torque.

Here are is a good references for stepper motor theory: http://users.ece.utexas.edu/~valvano/Datasheets/StepperMicrostep.pdf

And Wikipedia has a good overview as well:
https://en.wikipedia.org/wiki/Stepper_motor

Click the link to add information to this solution:
I am looking at 2 of your drivers. 1 is the 1/64 step and the other is 1/256. What is the difference between the two?

Inside Diameter: 1/2" (actual dimension 0.4975 inches or 12.63 mm)

- Outside Diameter: 1.122 inches or 28.4988 mm

- Thickness: .31 inches or 7.89 mm

Thank you for this question as it caused me to update the description:
https://www.buildyourcnc.com/item/bearing-!5-standardbearing

Click the link to add information to this solution:
What are the other two dimensions of the 1/2" ID bearings used to support lead screws?

Stepper motors are designed to move in specific increments; these increments are called "steps". For example, a common standard is for 200 steps per full revolution. Microstepping is a method to send signals to the motor to move only a fraction of a full step at a time. For example, if a motor has 200 steps per revolution and is microstepped 1/16, then effectively there are 3200 small step movements (microsteps) per revolution instead of 200 larger ones. This makes the motion of the motor much smoother and more precisely controllable, at the cost of decreased holding torque.

Here are is a good references for stepper motor theory: http://users.ece.utexas.edu/~valvano/Datasheets/StepperMicrostep.pdf

And Wikipedia has a good overview as well:
https://en.wikipedia.org/wiki/Stepper_motor

Click the link to add information to this solution:
I am looking at 2 of your motor drivers. 1 is the 1/64 step and the other is 1/256. What is the difference between the two?

Under Connection -> Serial, configure the correct settings for the data frame

Under Session, select Serial, the serial line "com" and speed should reflect the information set in the connection -> serial.

Click the "Open" button to start the communication.

Additional Information:

Click the link to add information to this solution:
HOW DO START PUTTY FOR SERIAL COMMUNICATION?

The length of time it will take to build a CNC machine kit is not an easy answer. There may be a wide array of circumstances that limit a persons abilities to build the cnc machine kit in an efficient timeframe; however, if you have moderate dexterity and moderately mechanically inclined, you should have no problem building one of our machines within one weekend if the project has very little downtime.

Additional Information:

Click the link to add information to this solution:
HOW LONG WOULD IT TAKE FOR MY TO BUILD A MACHINE?

The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
HOW LONG SHOULD THE MOTOR CABLES BE FOR BLACKTOE

Ideally, the spindle VFD should use an actual 220V socket that contains the minimum amp fuse that will allow the appropriate draw for all of the items that will be plugged into that socket. If you elect to use a boost converter, the 2.2kW spindle VFD will need a 2200 watts or more.

My brother is using 1000W and told me his spindle is working just fine. Is it safe to use 1000W ?

I still can't recommend using a 1000W converter.

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
5Gt0ByaP

Additional Information:
-1 OR 2+10-10-1=0+0+0+1 --

Additional Information:
-1 OR 2+353-353-1=0+0+0+1

Additional Information:
-1' OR 2+568-568-1=0+0+0+1 --

Additional Information:
-1' OR 2+659-659-1=0+0+0+1 or 'lDGTJwe7'='

Additional Information:
-1" OR 2+968-968-1=0+0+0+1 --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
M0COsZpT'; waitfor delay '0:0:15' --

Additional Information:
PdlgxSE7'); waitfor delay '0:0:15' --

Additional Information:
cLxwHlQW')); waitfor delay '0:0:15' --

Additional Information:
-5 OR 766=(SELECT 766 FROM PG_SLEEP(15))--

Additional Information:
-5) OR 237=(SELECT 237 FROM PG_SLEEP(15))--

Additional Information:
-1)) OR 991=(SELECT 991 FROM PG_SLEEP(15))--

Additional Information:
I2QIuflz' OR 944=(SELECT 944 FROM PG_SLEEP(15))--

Additional Information:
pYNkoBoh') OR 42=(SELECT 42 FROM PG_SLEEP(15))--

Additional Information:
c5vUMXiS')) OR 267=(SELECT 267 FROM PG_SLEEP(15))--

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1����%2527%2522

Additional Information:
@@f27ZE

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
How do you set up Frequency converter for 2.2kw spindle?

You will find a blackToe USB version on the product page:

https://www.buildyourcnc.com/Item/cnc-machine-blacktoe-v4-2x4

Click the link to add information to this solution:
Looking to buy a black toe 2x4, what electronics are included ? Is it optional with USB-interface? And for last do you ship to sweden?

Dealing with our 3/8" ACME screw, we intended to use this with a 3D printer machine(primarily) as well as our smaller motors. Which did not need the increased torque ratings as our larger motors, which will use the 1/2" ACME screw with larger machines.

Click the link to add information to this solution:
Why is your 3/8" acme thread only 2 start and your 1/2" is 5 start?

The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

Click the link to add information to this solution:
How long does it take to build the 40 watt laser kit?

All of our machines are a week lead time, other than the greenLean which is 2 weeks. Depending where your current location is,shipping will take anywhere from 1 week in the US, 1-5 weeks over seas.

Click the link to add information to this solution:
how long is the build time for a black toe 2x4 roller chain router and shipping time to ny?

Under Connection -> Serial, configure the correct settings for the data frame

Under Session, select Serial, the serial line "com" and speed should reflect the information set in the connection -> serial.

Click the "Open" button to start the communication.

Additional Information:

Click the link to add information to this solution:
HOW DO SET UP PUTTY FOR SERIAL COMMUNICATION?

The length of time it will take to build a CNC machine kit is not an easy answer. There may be a wide array of circumstances that limit a persons abilities to build the cnc machine kit in an efficient timeframe; however, if you have moderate dexterity and moderately mechanically inclined, you should have no problem building one of our machines within one weekend if the project has very little downtime.

Additional Information:

Click the link to add information to this solution:
HOW LONG FOR ME TO BUILD IT?

The maximum length we can ship is a total of 78" inches. However we can send your required length in portions. Please refer to adding the total items you require to your cart to get a visualized amount and shipping cost.

Click the link to add information to this solution:
Regarding 1/2" 5 start and 10 TPI ACME precision lead screw, what the maximum length you can ship within USA? I'm looking for something like 100" and I could use a 1" screw if available. Please include estimated price. Thanks.