For the integrated computer for the blackTooth, the hard drive doe not need to be formatted, but will require an OS (operating system) to be installed. Ubuntu Linux can be installed with the CNC integrated software from Linuxcnc.org. Windows can also be installed.

Click the link to add information to this solution:
I am building the Blacktooth with integrated computer, which consists of a motherboard and hard drive. Does the hard drive need to be formatted or any form of OS loaded onto the integrated computer?

If you have an existing PC with a parallel port you will not need to purchase the onboard computer system on the blackTooth laser cutter and engraver. You will want to purchase the blackTooth laser engraver that comes with the parallel interface (breakout board). If you have an existing CNC machine that is being used with this PC, you can disconnect the CNC machine and connect the blackTooth to this PC. You will want to have two configurations for your control software.

Additional Information:
We have a version of the blackTooth that is 110v and 220v. We generally determine which is sent according to the requirements of the customer and in what country they live.

Additional Information:
20

Additional Information:
Parallel Port Configuration BIOS settings and Mach 3.

Click the link to add information to this solution:
I'm interested in purchasing your black tooth laser engraver and am curious what setup to get. I already have a cnc wired via parallel port to my PC. Do I need to purchase the black tooth laser with the integrated computer or can I just disconnect my current cnc's parallel port and connect it to the black tooth laser engraver? Also is the black tooth 110v?

For our redFly there is no need for firmware, however you will need to purchase a license for the board. Which you can buy here: (http://planet-cnc.com/product/cnc-usb-controller-license/)
The license is to completely unlock the software Planet-CNC.

Click the link to add information to this solution:
i have a redfly box for a greenbull 5x10 do I need to load a firmware to use planet cnc or is it already done

Mach4 is designed to run in both 64 and 32-bit computers and operating systems, however, the parallel port interface will not work with 64-bit windows. The easiest solution would be to use a more modern CNC controller, like the:

pokeys57cnc that I sell
https://buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board

Or other options like the Smoothstepper board that I do not sell.

Both are great options.

Click the link to add information to this solution:
[468] I wanted to know if I could use a computer with 64 bits windows installed (with Parallel port in the mainboard) or not. Thanks

Is this CNC related. If so, what controller are you using?

Additional Information:
I'm using the Mach 3/USB CNC interface board, with the Mach 3 software.

Additional Information:
Does the LED on the controller light up, or blink?

Additional Information:
I believe I've corrected the issue. I found that their are 2 spring like tabs on the female USB port. And take a sharp point like on a compass and gentle raise those tabs a bit. This tighten up the connection, and I never received an error from losing connection.

Click the link to add information to this solution:
It appears I have a connection issue with the USB port on my computer with the USB cord. I purchased a new cord but has the same issue. Is there anything I can do to correct this issue?

The KL-4030 is a Keling 3.0 amp stepper motor driver. These are generally pretty robust drivers. You mentioned in the question that it worked for one hour. This sounds like it could be a contact issue with the wiring in the terminals. I would recommend that you check all of the connections. The terminals that are used in these drivers have terminals that are easily used incorrectly.

Make sure to open the terminal all the way using a small screw driver. Then insert the exposed wire into the opening and re-tighten the terminal. Make sure of a good connection by tugging on the wires.

Also, check kthe digital wires that connect from the driver to the control board.

Click the link to add information to this solution:
I have a KL-4030 stepper motor driver that I only have about an hour use on it but seems to be bad already. Has anyone out there had the same problem?

If the Z-Axis is moving down when you press the page up or page down (or by moving the z-axis by another means like with an MPG, Pendant, or the built-in MPG in Mach3), then the direction signal wire is not connected correctly. The direction signal wire works by moving in one direction with a low signal (like gnd) and moving in the other direction with a high signal (like 5v). If the signal stays at one of the two signals, it will only move in the direction of the current signal state. Recommended action is to determine if the DIR- and DIR+ signal wires are connected securely and make good contact at the driver and controller sides.

Click the link to add information to this solution:
I installed a pokeys57cnc and use Mach3 for the mill. When I page up or down the Z axis moves down. Is there a setting I need to change? I checked the Z axis wiring and it matches the X and Y axis which function correctly.

If the Z-Axis is moving down when you press the page up or page down (or by moving the z-axis by another means like with an MPG, Pendant, or the built-in MPG in Mach3), then the direction signal wire is not connected correctly. The direction signal wire works by moving in one direction with a low signal (like gnd) and moving in the other direction with a high signal (like 5v). If the signal stays at one of the two signals, it will only move in the direction of the current signal state. Recommended action is to determine if the DIR- and DIR+ signal wires are connected securely and make good contact at the driver and controller sides.

Click the link to add information to this solution:
I installed a pokeys57cnc and use Mach3 for the mill. When I page up or down the Z axis moves down. Is there a setting I need to change? I checked the Z axis wiring and it matches the X and Y axis which function correctly.

To make an axis move in the opposite direction to what it is currently moving, you will need to toggle the ":direction:" active low setting for that axis. for instance, if when you press the page up button and your z-axis move down instead of up, then you need to make this change in the configuration.

To do this in Mach3:
- Click on the config option in the top menu
- Click on ports & pins
- Click on the motor outputs tab
- on the axis you wish to reverse, click on the "dir active low" to toggle the state of that parameter.

Click the link to add information to this solution:
I installed a pokeys57cnc and use Mach3 for the mill. When I page up or down the Z axis moves down. Is there a setting I need to change? I checked the Z axis wiring and it matches the X and Y axis which function correctly.

The redLeaf CNC computer systems will have either Mach3 or LinuxCNC installed as per the customer's request. If the Mach3 license is purchased, the license file will also be installed on the redLeaf CNC computer system.

The Mach3 or LinuxCNC settings will be configured during the assembly of the system. We contact the customer to determine the drive (mechanics) and inertial (weight of gantry and other parts of the gantry) specifications in order to correctly configure the steps per inch, velocity and acceleration.

Click the link to add information to this solution:
I ordered a redLeaf with Mach3 installed. Do you guys configure any of the setting in mach3 or will I need to do that all myself?

There is a diagram on the breakout board page that covers this topic you can find here: https://www.buildyourcnc.com/images/breakout%20suggested%20diagram.jpg

The "P" is the relay input. The "O" is the normally open connection and the "S" is the normally closed connection.

Hope this helps. Thanks.

Click the link to add information to this solution:
Recently ordered relay board from you, there was no documents pertaining to signal in, gnd,5v,etc. Figured out the signal, .gnd and 5 v. Problem is I don’t see where O S P are to be connected?, I assume OS normally open or closed, and P don’t have a clue. Although I see the 2 up arrows and one down arrow. Thanks in advance Richard

If you read the description the first uses a parallel interface for computer hookup. The second uses USB interface for computer hookup. The third utilizes an integrated computer which is built into the package thus you do not need an external computer.

Click the link to add information to this solution:
What is the difference between the 3 Blacktooth laser packages offered? Specifically, one with/without a computer? Why do I need one? Also, is the $2100 assembled vs the $1700 which is not? What am I paying $400 more for?

Most motherboard do contain parallel ports, but the port connector may not be at the back (in the section where external connectors will be connected). Instead, the motherboard may contain an LPT ribbon connector on the actual face of the motherboard (usually along one of the edges). You will need a ribbon connector to a DB25 female connector.

If your motherboard does not contain an LPT header on the motherboard, you can purchase a parallel printer adapter that plugs into one of the PCI slots. The price of the adapter is very inexpensive and sometimes is actually less costly than the actual ribbon connector.

Click the link to add information to this solution:
As I am building my 20" x 24" laser engraver cutter, I notice that there is no parallel port on the onboard computer and I have the parallel breakout board any answers?

a 2' (24 inches) diameter workpiece for a 2'x8' machine may be a bit too much for an overhang. I would recommend the 4'x8' that can house a 4th axis in a cavity within the limits of the machine for a 24-inch part. If you need the rotary axis on the side of the machine, I can design a machine that would work.

Click the link to add information to this solution:
[790] Is there a way to build a 2x8 flat cnc with a 4 th axis on the side so I can do 24” diameter objects. Or have the z axis that tall

Youmay be able to find an adapter for your cable, or even a new cable, locally. This is the cable we sell that will work, https://www.buildyourcnc.com/item/electronicsAndMotors-cable-wire-db25-male-male

Click the link to add information to this solution:
The female 25 pin socket on my computer has to be connected to a similar socket on the breakout (parallel) board which came with my Blacktooth. Do I need a DB25 to DB25 cable, if such a thing exists? The cable I have is male to female.

Currently the only options available for our computer systems, are for our machines which included all the motors and drivers. If you would like to talk about a custom order, please email (customerservice@buildyourcnc.com).

Click the link to add information to this solution:
Do you sell the computer system only ? My Dell has given up the ghost. I may want to buy the PC, Power and case. I have everything else.

If one or more motor is not responding, please follow the troubleshooting directions below:

For parallel Bob only! Make sure both the parallel and USB are connected.

Re-check wiring, and connections for continuity (no breaks in the wires) and check for correct wiring locations from driver to BoB.
Check dip switch settings on the driver.
Check components, by swapping the motors (ex. y-axis motor to z or x-axis driver and z or x-axis motor to y-axis driver) to check if motor functions on another driver.
Depending on software check step low active (mach 3) or invert pulse (planet-cnc) for the axis which is not responding.
Mach 3 - config/port & pins/motor outputs / Planet-CNC - file/settings/axes

Click the link to add information to this solution:
I have an engine NEMA 34 from Y axis on my green bull that do not response, I already check connections and everything seems to be OK, how can I check that the motor it's working properly or not?

The bluchick CNC router is a perfect small format CNC that can handle most jobs. Please check here to see the latest information on this CNC router. blueChick CNC Machine. The machine can be purchased assembled. Al you will need is a computer and spindle.

Click the link to add information to this solution:
I'm looking for a complete CNC router, out the box ready to use system. Computer and software. What do you suggest? I need a working area of 12"x24"

If you purchased the ArtCAM from us, please send an email to us at customerservice@buildyourcnc.com with the name used with making the order and we will contact the developer to send you the license.

Click the link to add information to this solution:
i have Artcam 2013 for an General Inc. Icarver 40913. My computer crash with the Licenses from Delcam i would like to know how to get the licenses.