Hola puedo venderte una maquina nueva completa chocofrutfc@yahoo.es

Click the link to add information to this solution:
Hi, I’m purchasing an ox build workbee cnc router from China but I need to purchase the spindle mount, router and all cables/wires. Please can you give a list and quote of what I will need? I am purchasing the electrical pack with it but it doesn’t come with the cables and all other bits I need. Thank tou

You can find the datasheets to our motors be going to the the stepping motor category page https://www.buildyourcnc.com/category/nema and selecting the motor. This will bring you to the product page for the motor and all of the motor information will be found there.

Click the link to add information to this solution:
I would like to design my own CNC router around one of your electronics bundles, either the 3 Axis - Heavy Gantry or 3 Axis - All Large Motors. Do you have the data sheets for the motors so that I can use the dimensions in my model?

We will contact you with a list of options.

Click the link to add information to this solution:
I would like to upgrade my older engraver to usb or parallel port i want to build as much of it as possible to cut down on expense. The name of the engraver is New Hermes vanguard 4000 the specs can be found on the internet. Looking to purchase parts today please contact me at 937-262-8446 or email me at isaacjcrawford@sbcglobal.net with the information and part numbers thanks.

If you were logged in when you made the purchase, you can click the "My Account" link at the top of any page on this website and see all of your orders, order line items (with direct links to these items), and shipment information.

Here is a link to the "My Account" page for your convenience:
https://www.buildyourcnc.com/CustomerInfo.aspx

I did not see your username on your internal customer record, so I added this username and you should be able to see the information in the "My Account" page.

Additional Information:
I just tested your accounts page and the cable carrier links are in there. Thanks and please let me know if you need further assistance.

Click the link to add information to this solution:
I have purchased cable carrier chain and would like to know if you could send me a copy of that order as I need to purchase extra lengths of the links I bought. Thanks

When dealing with 3rd party machines, we have a universal setup that will fit almost any other machine, although please take in consideration the specifications in which your stepper motors and drivers are used and set to!
Now changing the controls, would be more or less changing the Breakout board/interface board to a different one that might use a different program to run your machine. Usually you will not need to change your interface board or breakout board, unless the 3rd party manufacture made it specifically to that set up.

Click the link to add information to this solution:
I purchased a 3040 CNC router off eBay a year ago and would like to change the controls. The steppers are 185oz.in motors. My question do i need to purchase a interface board and break out boards?

Sure, our blueChick and blackToe CNC Routers are considered relatively small machines at 1'x3' and 2'x4' respectively. They both use NEMA 23/24 motors. We recommend connecting the machines to either Mach3 or LinuxCNC and come with the necessary interface for either control software. You will need a computer for the control software and if you desire LinuxCNC, you will need a parallel port. Mach3 will accept either parallel port, or USB interface.

Click the link to add information to this solution:
I recently purchased the linksprite cnc engraving router and was wondering if your 3 axis small kit would be ok? the engraver came with nema 17 motors and a arduino board but but not liking the grbl control. could you point me in the right direction .Thanks.

Can you send me a link to the digitizer you are using?

Click the link to add information to this solution:
Hi my names is Minh Truong I would like to said thank you very much for your video I got the system mach3 working fine but one thing I can NOT set and config the digitizer on the board IN4 I am not sure how to setup because in the Mach3 pin 14 for digitizer Please shoe me hoe to set it up for the digitizer.

That order did not show up in our system. We searched and found it in our PayPal activity. We are sending it today. My apologies for this.

Additional Information:
I received my order, thank you. However the collet nut will not fit my Porter Cable 690, the threads are too coarse. Can you please send the correct nut, and I will return the wrong nut.
Thank you,
Tom

Additional Information:
I believe the wrench is different also.

Additional Information:
Ok. I will send the correct wrench and collet nut.

Additional Information:
It’s Monday 11-16, and I have not received the nut and wrench. Have you shipped it yet?

Additional Information:
Let me check.

Additional Information:
The set of collets and nut/spanner came straight from the supplier PreciseBits. I am working to understand what went wrong and get it resolved.

Additional Information:
Do you have any new info on the status?

Additional Information:
It’s now Dec 2nd, I ordered this on Oct 7th. No resolution yet! Still waiting, Not very happy.

Click the link to add information to this solution:
I ordered a collet set for a Porter Cable router on 10/7, my card was charged on 10/8. I have not heard anything from you as to when it would ship, or even a confirmation of the order. Please let me know the status.

Considering enlarging the machine, might have its down sides do to the structural integrity of the scratch build machine. Primarily by making the width longer it will start to sag in the center, which will lead to having to redesign the gantry to be more structurally rigid to support the added length. Which then will increase the weight and height of your gantry to support the add size, which will always end up to creating a larger CNC.

We usually do not recommend modifying the scratch build CNC, due to the very limited capabilities, and the structural design of the scratch build. We also do not recommend using longer than 48" ACME screw/leadscrew due to the increasing chance of warping and bending in the ACME screws/leadscrew in the given length.
We do recommend modifying the CNC machines we sell to accommodate the added requests that some of our customers desire, but you will be limited to the width of the gantry with our machines.

Click the link to add information to this solution:
I've read your book and I'm looking to purchase the hardware kit with DVD as well as an electronics kit. I would like my machine to have a working area of at least 24" wide by 48" long. Can I just make the bed (and gantry) wider to accommodate larger priceslike 30"x60"? If so what electronics kit would you recommend?

We are developing plans for our machine, but they are not completed yet. Please let me know if you would like to be added to our list of customers wanting plans. Thanks,

Additional Information:
If you have specific questions regarding CAD, CAM and Control, please add another question to the customer service and I will answer them in detail.

Click the link to add information to this solution:
How do I get started I would like to build a cnc router. Making the machine I can do, but I am weak on cad,cam and mach3. I am thinking about a 4’x4’. Do you have plans I can buy?

You will need PlanetCNC software for the USB breakout board and when plugging in the USB the computer should automatically recognize the board, however you can go into device manager to see if the USB terminal is working correctly.
The parallel breakout board; the USB is not a connection terminal rather than a power source, and the parallel port will be the communication terminal.
The items you will need for a water cooled spindle would be: water pump, silicon tubing(length desired by customer), a extension cord(from a hardware store(orange))(1 same gauge wire/length as extension cord).

Click the link to add information to this solution:
I am making my own CNC setup using all the electronics from your website and I have many questions. Please advise how to have my computer recognize the USB connection from my breakout board also I would like to use a water cooled spindle but I need to know the parts required for a 4x10 bed area used for woods and plastics

Dealing with a 4' x 12' machine, our blackFoot kit will be your best option. Since our machines are only limited to the width but not length wise, you can add however much extra rail and roller chain to accommodate your extended length. Now adding our 4th axis kit (https://www.buildyourcnc.com/item/axes-4th) will be needed for your 4th axis (unless custom design is required).

These items will be the best requirements to build a 4' x 12' 4th axis machine.
Machine (either parallel/USB BoB): https://www.buildyourcnc.com/blackFoot48v40.aspx
4th axis: https://www.buildyourcnc.com/item/axes-4th

Click the link to add information to this solution:
Hi, I am very interested in this CNC Router unit [4'x8'], but from South Africa with our exchange rat [1$ =13,4 ZAR presently, make these kits out of reach. The plans part has been discontinued, but in our situation, would you reconsider and supply full plans and instructions at a cost? please let me know.

We are toying with the idea of re-introducing plans for some of our machines. Please give us a call to discuss further.

Click the link to add information to this solution:
Hi, I am very interested in this CNC Router unit [4'x8'], but from South Africa with our exchange rat [1$ =13,4 ZAR presently, make these kits out of reach. The plans part has been discontinued, but in our situation, would you reconsider and supply full plans and instructions at a cost? please let me know.

Yes. The VFD (Variable Frequency Drive) has a large set of parameters that can be modified. This is typically called "programming" the VFD. The parameters can be accessed using the front control panel of the VFD.

Since the VFD is the mechanism that control the allowable current draw from the spindle, there is a parameter that assigns the motor rated current; however, it is probably better to match the rated current of the motor and "up" the circuit breaker current instead. If the current limit is set too low, then there is a possibility that the spindle will cause a current overload error on the VFD and cause the spindle to stop.

Click the link to add information to this solution:
With your 120v drive systems for your 2.2kw spindles, do you do something to limit the output to the spindle so that the current draw doesn't exceed the 80% limitations of a 20a circuit? I have a dedicated circuit for my router and I am considering a spindle upgrade, but I am curious how the configuration matches the math.

Yes, servo motors can be mounted on this machine. If the mounting dimensions are different than NEMA 23 or NEMA 34, then all you need to do is keep the center of the motorshaft with the center of the bearing location and locate the mounting holes for he servo you wish to use. Most industrial servos used for these machines share the same mounting dimensions and NEMA specifications.

Additional Information:
This machine is one of the most customizable machines out in the wild. Customers of these machines have fashioned many modifications to suit their needs.

Additional Information:
20

Click the link to add information to this solution:
[796] Hello. To what extent can the design plans be customized? For example, if I wanted servo motors instead of steppers? That would requirements for motor mounting, controls, and electrical. Thank you.

Currently we do not have that modification kit, our set up is fixed for our greenBull only modification kit we have for this model is the long z-axis kit(Designed for Foam cutting).

Click the link to add information to this solution:
I am building your "Green Bull' 6 foot wide kit and I am at the stage of attaching the motor and drive chain. I would like to know if you have an modification kit available to put the 1/2" ACME screw on the Y-axis?

What is the item that you purchased on Sept 24?

Click the link to add information to this solution:
Hi my name is Robert and I have try to contact you on a purchase from you around 24 sept and i have not received it so i tried calling you via 281-815-7701 and talked to many other person except you . 9am to 5pm Could you Please send a Phone number that work please.

If you have an existing PC with a parallel port you will not need to purchase the onboard computer system on the blackTooth laser cutter and engraver. You will want to purchase the blackTooth laser engraver that comes with the parallel interface (breakout board). If you have an existing CNC machine that is being used with this PC, you can disconnect the CNC machine and connect the blackTooth to this PC. You will want to have two configurations for your control software.

Additional Information:
We have a version of the blackTooth that is 110v and 220v. We generally determine which is sent according to the requirements of the customer and in what country they live.

Additional Information:
20

Additional Information:
Parallel Port Configuration BIOS settings and Mach 3.

Click the link to add information to this solution:
I'm interested in purchasing your black tooth laser engraver and am curious what setup to get. I already have a cnc wired via parallel port to my PC. Do I need to purchase the black tooth laser with the integrated computer or can I just disconnect my current cnc's parallel port and connect it to the black tooth laser engraver? Also is the black tooth 110v?

Please contact us at sales@buildyourcnc.com so we can provide you with assistance on your order

Click the link to add information to this solution:
I am trying to purchase a kit for our school in Singapore, and your site keeps refusing our corporate AMEX card. Can you help us figure out what is up with that? Are you not ship to Singapore or something? Our AMEX rep says that the account is authorised for this purchase from our end, so the problem may be with your site? Please advise.