[ Log In ]
[ Register ]

Question #: 412

Question: WHAT ELSE?

Current Solution

PC with parallel port and USB port
20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
18awg stranded wires for power supply to drivers
24awg stranded wires for breakout board to drivers
(location and spacing of components varies from one person to another, so we do not provide cables/wires)
- General purpose extension cord (cut the female end off) to provide power to power supply
- USB cable to power breakout board
- Parallel cable to communicate to breakout board
- Router
- (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
- (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
- End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
- CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
- CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx
- If the machine does not have the table included, then a table will need to be built. The rails, chain and chain mounts are included that are used on this table.

Additional Information:

Respond:

Other Possible Solutions to this Question

  • WHAT ELSE DO I NEED TO BUY?

    PC with parallel port and USB port
    20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
    18awg stranded wires for power supply to drivers
    24awg stranded wires for breakout board to drivers
    (location and spacing of components varies from one person to another, so we do not provide cables/wires)
    - General purpose extension cord (cut the female end off) to provide power to power supply
    - USB cable to power breakout board
    - Parallel cable to communicate to breakout board
    - Router
    - (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
    - (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
    - End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
    - CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
    - CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx
    - If the machine does not have the table included, then a table will need to be built. The rails, chain and chain mounts are included that are used on this table.

    Additional Information:

    Click the link to add information to this solution:
    WHAT ELSE DO I NEED TO BUY?

  • WHAT ELSE DO I NEED WITH THE MACHINE?

    PC with parallel port and USB port
    20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
    18awg stranded wires for power supply to drivers
    24awg stranded wires for breakout board to drivers
    (location and spacing of components varies from one person to another, so we do not provide cables/wires)
    - General purpose extension cord (cut the female end off) to provide power to power supply
    - USB cable to power breakout board
    - Parallel cable to communicate to breakout board
    - Router
    - (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
    - (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
    - End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
    - CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
    - CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx
    - If the machine does not have the table included, then a table will need to be built. The rails, chain and chain mounts are included that are used on this table.

    Additional Information:

    Click the link to add information to this solution:
    WHAT ELSE DO I NEED WITH THE MACHINE?

  • WHAT IS PI?

    Approximately 3.1415927

    Click the link to add information to this solution:
    WHAT IS PI?

  • WHAT CNC?

    CNC stands for Computer Numeric Control. In simple terms it means that a machine is controlled by a computer.

    Click the link to add information to this solution:
    WHAT CNC?

  • WHAT H2O?

    H2O is water. 2 atoms of hydrogen and 1 atom of oxygen

    Click the link to add information to this solution:
    WHAT H2O?

  • WHAT PI?

    Approximately 3.1415927

    Click the link to add information to this solution:
    WHAT PI?

  • WHAT IS KERF?

    Kerf is the cutting width from the lasers beam. This will change in width depending on your power level, higher power will increase your kerf width. This is usually around 0.15mm for a 40w laser using a 2" lens

    Click the link to add information to this solution:
    WHAT IS KERF?

  • WHAT COPYRIGHT?

    Copyright is a form of protection grounded in the U.S. Constitution and granted by law for original works of authorship fixed in a tangible medium of expression. Copyright covers both published and unpublished works.

    Click the link to add information to this solution:
    WHAT COPYRIGHT?

  • WHAT THE BRAIN?

    The ALL POWERFULL!!!

    Click the link to add information to this solution:
    WHAT THE BRAIN?

  • WHAT IS "BACKLASH"

    Backlash is a term used to describe the looseness in a mechanical system. Backlash can occur anywhere in a machine, but is generally emphasized at the nut and lead screw connection. If the nut threading doesn't perfectly match the lead screw thread, there will be a wiggle, or play between both the screw and nut. This is backlash. Backlash can also be located in the motor bearings, coupling (connecting a shaft or lead screw to the motor shaft), collars not being hard against the bearing, or temperature change that causes various materials to expand or contract, making the connections loosened.

    Click the link to add information to this solution:
    WHAT IS "BACKLASH"

  • WHAT IS FOCAL LENGTH

    The lens is 20mm wide and a 50.6mm focal length (the one included). This lens will stand up to at least 30PSI air assist.

    The mirrors are 25mm wide mirrors.

    Focal length is the distance from the lens to the material for the laser converge into the best focal point. If a lens is listed as 2". You measure 2" from the lens to the material, this will be the tightest point the laser can go before it starts to re-expand again losing focus.

    Click the link to add information to this solution:
    WHAT IS FOCAL LENGTH

  • WHAT IS CNC MACHINE?

    A CNC machine is basically a computer controlled high precision tool that is able to make intricate movements accurately and repeatedly. Our machines use common routers and spindles to mill, cut, engrave and shape materials in automated machining operations.

    Click the link to add information to this solution:
    WHAT IS CNC MACHINE?

  • WHAT MY WIFE'S NAME?

    I don't have a wife... I'm just a brain!

    Click the link to add information to this solution:
    WHAT MY WIFE'S NAME?

  • WHAT THE BRAIN MADE OF?

    Grey matter and a few integrated circuits!

    Click the link to add information to this solution:
    WHAT THE BRAIN MADE OF?

  • WHAT DOES COPYRIGHT MEAN

    Copyright, a form of intellectual property law, protects original works of authorship including literary, dramatic, musical, and artistic works, such as poetry, novels, movies, songs, computer software, and architecture. Copyright does not protect facts, ideas, systems, or methods of operation, although it may protect the way these things are expressed

    Click the link to add information to this solution:
    WHAT DOES COPYRIGHT MEAN

  • WHAT THE MEANING OF LIFE

    The BRAIN!!

    Click the link to add information to this solution:
    WHAT THE MEANING OF LIFE

  • WHAT DOES FFC STANDS FOR

    FFC stands for Film Finance Corporation

    Click the link to add information to this solution:
    WHAT DOES FFC STANDS FOR

  • WHAT CAN CNC MACHINES DO?

    There is virtually no limit to what a CNC can do. CNC machines are responsible for almost all modern day machining operations in manufacturing industries. They normally costs tens of thousands of dollars, or hundreds of thousands of dollars. Our machines can be used to engrave plaques, cut wood for kits, mill aluminum parts, and inject plastic components. All it requires is willing to learn and understand how to use the machines to accomplish what you want to do.

    Additional Information:
    Curved Trophy

    Additional Information:

    Click the link to add information to this solution:
    WHAT CAN CNC MACHINES DO?

  • WHAT DOES YOUR HEART PUMP?

    Your heart pumps blood.

    Click the link to add information to this solution:
    WHAT DOES YOUR HEART PUMP?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.