[ Register ]

### Question #: 476

Question: WHAT ARE CHINA PRICES FOR COLLETS?

Current Solution

From: Milan Shah
ACCU-FIX Precision Tools Pvt Ltd
458, Manjusar GIDC, Savli, Vadodara, Gujarat, India
Mobile: +(91) 7567975718

ER 11 - STD. Precision Collet \$3.61 - No 1/2" shank sizes.
ER 16 - STD. Precision Collet \$4.05
ER 20 - STD. Precision Collet \$4.27
ER 25 - STD. Precision Collet \$4.34
ER 32 - STD. Precision Collet \$4.69
ER 40 - STD. Precision Collet \$5.32
---------------------------------------------------------------

Respond:

### Other Possible Solutions to this Question

• WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Click the link to add information to this solution:
WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

• WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Click the link to add information to this solution:
WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

• WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE

The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Click the link to add information to this solution:
WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE

• WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?

Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.

https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

Click the link to add information to this solution:
WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?

• WHAT ARE THE SHIPPING DIMENSIONS FOR GREENBULL?

76" X 40" X 26"
230 LBS

Click the link to add information to this solution:
WHAT ARE THE SHIPPING DIMENSIONS FOR GREENBULL?

• WHAT ARE THE ROLLER CHAIN LENGTHS FOR GREENBULL 4X

The roller chain lengths for the greenBull 4x is:
- 13 feet for each side of the X axis (total of 26 feet), and
- 6 feet for the Y-axis

Click the link to add information to this solution:
WHAT ARE THE ROLLER CHAIN LENGTHS FOR GREENBULL 4X

• WHAT ARE THE SHIPPING DIMENSIONS FOR VERTICAL LASER

Shipping crate size 121" X 36" X 92"

Weight 511 LBS

Click the link to add information to this solution:
WHAT ARE THE SHIPPING DIMENSIONS FOR VERTICAL LASER

• WHAT MACHINES DO WE SELL PLANS FOR

Yes, the CNC machine hardware and plans combo is the same machine as in the book. The machine that we provide the plans for, can be found on the website, here http://buildyourcnc.com/Item/cnc-machine-scratchbuild

Click the link to add information to this solution:
WHAT MACHINES DO WE SELL PLANS FOR

• WHAT IS THE LEAD TIME FOR REDFROG?

You can expect a two week lead time for the redFrog pick and place machine.

Click the link to add information to this solution:
WHAT IS THE LEAD TIME FOR REDFROG?

• WHAT IS THE LEAD TIME FOR BLACKTOE?

You can expect a one week lead time for our machines.

Click the link to add information to this solution:
WHAT IS THE LEAD TIME FOR BLACKTOE?

• WHAT IS THE LEAD TIME FOR BLACKFOOT

You can expect a one week lead time for our machines.

Click the link to add information to this solution:
WHAT IS THE LEAD TIME FOR BLACKFOOT

• WHAT DO I SET FOR MY STEPS PER?

blueChick:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackToe:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackFoot:

X-axis
“CW8060 (6.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

greenBull:

X-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110
Mach3 Motor Tuning: 914.29 steps/in

Z-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/4 Microstep
Dipswitches: 01100100
Mach3 Motor Tuning: 1600 steps/in

Scratch-Build / Book-Build Kit:

X-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 1600 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Scratch built/book CNC with NEMA 34 motors and CW8060 microstep driver

L8NiICEm

-1 OR 2+427-427-1=0+0+0+1 --

-1 OR 2+145-145-1=0+0+0+1

-1' OR 2+101-101-1=0+0+0+1 --

-1' OR 2+739-739-1=0+0+0+1 or 'kXOzulhF'='

-1" OR 2+194-194-1=0+0+0+1 --

if(now()=sysdate(),sleep(15),0)

0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

-1; waitfor delay '0:0:15' --

TO93cbNY

-1 OR 2+824-824-1=0+0+0+1 --

-1 OR 2+681-681-1=0+0+0+1

-1' OR 2+805-805-1=0+0+0+1 --

-1' OR 2+93-93-1=0+0+0+1 or 'MpFdFb3O'='

-1" OR 2+275-275-1=0+0+0+1 --

-1); waitfor delay '0:0:15' --

if(now()=sysdate(),sleep(15),0)

-1); waitfor delay '0:0:7' --

0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

-1); waitfor delay '0:0:15' --

0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

-1)); waitfor delay '0:0:15' --

0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

1 waitfor delay '0:0:15' --

0"XOR(if(now()=sysdate(),sleep(9),0))XOR"Z

2k2XS4cL'; waitfor delay '0:0:15' --

(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

g7NWXuig'); waitfor delay '0:0:15' --

-1; waitfor delay '0:0:15' --

XoN629J2')); waitfor delay '0:0:15' --

-1); waitfor delay '0:0:15' --

-5 OR 247=(SELECT 247 FROM PG_SLEEP(15))--

-1)); waitfor delay '0:0:15' --

-5) OR 122=(SELECT 122 FROM PG_SLEEP(15))--

1 waitfor delay '0:0:15' --

-1)) OR 455=(SELECT 455 FROM PG_SLEEP(15))--

o1WPxXu4'; waitfor delay '0:0:15' --

X3pq07N4' OR 218=(SELECT 218 FROM PG_SLEEP(15))--

i2jhQp7d'); waitfor delay '0:0:15' --

xMv7x4te') OR 71=(SELECT 71 FROM PG_SLEEP(15))--

IbKvmZZx')); waitfor delay '0:0:15' --

YkhmkP9W')) OR 826=(SELECT 826 FROM PG_SLEEP(15))--

-5 OR 539=(SELECT 539 FROM PG_SLEEP(15))--

-5) OR 160=(SELECT 160 FROM PG_SLEEP(15))--

1'"

1����%2527%2522

@@EQr47

-1)) OR 220=(SELECT 220 FROM PG_SLEEP(15))--

-1)) OR 266=(SELECT 266 FROM PG_SLEEP(9))--

-1)) OR 107=(SELECT 107 FROM PG_SLEEP(0))--

vL4vUHTG' OR 262=(SELECT 262 FROM PG_SLEEP(15))--

gGLXRSqE' OR 938=(SELECT 938 FROM PG_SLEEP(15))--

WT10Ii3x' OR 598=(SELECT 598 FROM PG_SLEEP(9))--

QUuBKFso') OR 152=(SELECT 152 FROM PG_SLEEP(15))--

nI56G5Pp')) OR 493=(SELECT 493 FROM PG_SLEEP(15))--

1'"

1����%2527%2522

@@nxzWO

vJlQYk5k

-1 OR 2+406-406-1=0+0+0+1 --

-1 OR 2+236-236-1=0+0+0+1

-1' OR 2+914-914-1=0+0+0+1 --

-1' OR 2+282-282-1=0+0+0+1 or '9J7jHjSj'='

-1" OR 2+210-210-1=0+0+0+1 --

if(now()=sysdate(),sleep(15),0)

0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

0"XOR(if(now()=sysdate(),sleep(14),0))XOR"Z

0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

0"XOR(if(now()=sysdate(),sleep(0),0))XOR"Z

(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

-1; waitfor delay '0:0:15' --

-1); waitfor delay '0:0:15' --

-1)); waitfor delay '0:0:15' --

1 waitfor delay '0:0:15' --

RO4xZyuD'; waitfor delay '0:0:15' --

n2HpQRHN'); waitfor delay '0:0:15' --

hd4dcDEY')); waitfor delay '0:0:15' --

-5 OR 237=(SELECT 237 FROM PG_SLEEP(15))--

-5) OR 65=(SELECT 65 FROM PG_SLEEP(15))--

-1)) OR 486=(SELECT 486 FROM PG_SLEEP(15))--

-1)) OR 399=(SELECT 399 FROM PG_SLEEP(14))--

x4ZvP74B' OR 337=(SELECT 337 FROM PG_SLEEP(15))--

0VRZpjOv') OR 601=(SELECT 601 FROM PG_SLEEP(15))--

DrCdekI1')) OR 16=(SELECT 16 FROM PG_SLEEP(15))--

MQqu0z64')) OR 87=(SELECT 87 FROM PG_SLEEP(7))--

1'"

1����%2527%2522

@@HJ5oY

Click the link to add information to this solution:
WHAT DO I SET FOR MY STEPS PER?

• THESE MACHINES ARE DANGEROUS, WHAT DO DO?

These machines are inherently dangerous. Before the machine moves, the machine should be clear of any person by a dimension of at the distance of a persons reach plus a few more feet. This is the policies we institute in our shop and what is recommend to all of our customers. Treat these machines as you would treat any major power tool in the shop.

With that said, you can certainly add some protective parts, but still keep folks away even with those installed. I would use the gantry side to do all of the mounting of the protective parts. Consider using sheet metal that you can bend and make a simple installation right on the gantry side.

Click the link to add information to this solution:
THESE MACHINES ARE DANGEROUS, WHAT DO DO?

• WHAT THE TECHNICAL SUPPORT FOR STAMPS.COM?

The stamps.com technical support is developersupport@stamps.com

Click the link to add information to this solution:
WHAT THE TECHNICAL SUPPORT FOR STAMPS.COM?

• WHAT COMES IN THE BOX FOR BASIC GREENLEAN?

The base greenLean CNC Machine Kit package includes:
- Structure (all of the structural parts that make up the gantry and rib system). The structure does not include the spoilboard.
- Hardware (All of the fasteners, like screws, nuts, cross dowels, washers, etc.)
- Mechanical components (bearings, rails, sprockets, shafts, etc.)
- Electronics (3 NEMA 651 Motors, 3 6.0 Amp drivers power supply, interface card to connect the drivers to a computer, and 91 feet of motor cable. Hookup wire to connect the electronics is not included.)
- 2.2kw Spindle and VFD

Here is a link to the greenLean CNC Macnine page: https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1

Click the link to add information to this solution:
WHAT COMES IN THE BOX FOR BASIC GREENLEAN?

• AND WHAT SIZES ARE THE PACKAGES OF MACHINE.

the package sizes will be listed in your shopping cart, in the item detail. The site will also fully calculate shipping charges directly from the carrier, for each package you purchase.

Click the link to add information to this solution:
AND WHAT SIZES ARE THE PACKAGES OF MACHINE.

• WHAT ARE THE BLACKTOOTH SHIPPING DIMENSIONS?

The blacktooth ships in 3 boxes.

Structure 38x22x5 #54

Components 14x13x13 #30

Laser Tube 35x7x6 #4

Click the link to add information to this solution:
WHAT ARE THE BLACKTOOTH SHIPPING DIMENSIONS?

• WHAT DOES FFC STANDS FOR

FFC stands for Film Finance Corporation

Click the link to add information to this solution:
WHAT DOES FFC STANDS FOR

• WHAT CABLE LENGTHS SHOULD USE FOR THE BLACKTOE

The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Click the link to add information to this solution:
WHAT CABLE LENGTHS SHOULD USE FOR THE BLACKTOE

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales