[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 494

Question: BLACKTOE REQUIRED HOW MUCH CABLE

Current Solution

The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Respond:

Other Possible Solutions to this Question

  • THE BLACKTOE REQUIRES HOW MUCH MOTOR CABLE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    THE BLACKTOE REQUIRES HOW MUCH MOTOR CABLE

  • HOW LONG SHOULD THE MOTOR CABLES BE FOR BLACKTOE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    HOW LONG SHOULD THE MOTOR CABLES BE FOR BLACKTOE

  • WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

  • WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

  • BLACKTOE MOTOR CABLE LENGTH

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    BLACKTOE MOTOR CABLE LENGTH

  • BLACKTOE MOTOR CABLE LENGTH

    The total length of cable for the greenBull 5x is 50 ft.
    Now the individual lengths for all three axis, is x=15 ft, y=17 ft, z=18 ft.

    Click the link to respond:
    BLACKTOE MOTOR CABLE LENGTH

  • WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE

  • BLACKTOE MOTOR CABLES

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    BLACKTOE MOTOR CABLES

  • WHAT CABLE LENGTHS SHOULD USE FOR THE BLACKTOE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    WHAT CABLE LENGTHS SHOULD USE FOR THE BLACKTOE

  • BLACKTOE MOTOR CABLE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    BLACKTOE MOTOR CABLE

  • BLACKTOE CABLE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    BLACKTOE CABLE

  • HOW MUCH MOTOR CABLE FOR THE BLACKFOOT?

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to respond:
    HOW MUCH MOTOR CABLE FOR THE BLACKFOOT?

  • HOW MUCH MOTOR CABLE DO I NEED FOR A BLACKFOOT

    The blackfoot requires a total of 50 feet of cable.

    The X axis needs 15 feet
    The Y axis needs 17 feet
    and the Z-axis needs 18 feet

    These are 20 gauge 4 conductor cable.

    Click the link to respond:
    HOW MUCH MOTOR CABLE DO I NEED FOR A BLACKFOOT

  • HOW MUCH MOTOR CABLE SHOULD PURCHASE FOR THE BLUECHICK

    The recommended total length of motor cable should be 15 feet for the blueChick v4.2

    Z - 6 feet
    Y - 5 feet
    X- 4 feet

    20 AWG 4 conductor

    If your drivers will be positioned farther from the machine, you may need longer cable.

    Click the link to respond:
    HOW MUCH MOTOR CABLE SHOULD PURCHASE FOR THE BLUECHICK

  • How many hours are required top build the 40 watt kit?

    Assembling any of our machines will vary from customer to customer as it is a measure of the ability of the assembler. For the blackTooth laser machines, you should be able to have it assembled between two to four well focused days.

    Click the link to respond:
    How many hours are required top build the 40 watt kit?

  • I HAVE BLACKTOE 4.1 WITH PORTER CABLE 890 ROUTER.TO CONVERT TO SPINDLE(2.2KW) CAN JUST CHANGE THE MOUNT?

    If you would like to use a spindle rather than a router on your existing CNC, we will send you another set of components that will allow the spindle to be mounted properly which includes the z-axis rails, rail support, spindle mounts and the dust shoe components. You can find this item to purchase here: https://www.buildyourcnc.com/category/z-axis

    Click the link to respond:
    I HAVE BLACKTOE 4.1 WITH PORTER CABLE 890 ROUTER.TO CONVERT TO SPINDLE(2.2KW) CAN JUST CHANGE THE MOUNT?

  • I have blacktoe 4.1 with porter cable 890 router.To convert to spindle(2.2kw) can I just change the mount?

    If you would like to use a spindle rather than a router on your existing CNC, we will send you another set of components that will allow the spindle to be mounted properly which includes the z-axis rails, rail support, spindle mounts and the dust shoe components. You can find this item to purchase here: https://www.buildyourcnc.com/category/z-axis

    Click the link to respond:
    I have blacktoe 4.1 with porter cable 890 router.To convert to spindle(2.2kw) can I just change the mount?

  • I have a blacktoe router table with a porter cable 892 currently in it. Which other router(s) fit the same mount?

    The motor mounts for the PC 890 series routers will fit the Bosch 1617 routers as well, however you will need to adjust the top mount to accept the slight edge of the Bosch 1617 router at the top motor mount.

    Click the link to respond:
    I have a blacktoe router table with a porter cable 892 currently in it. Which other router(s) fit the same mount?

  • DO YOU HAVE BLACKTOES WITH TABLES?

    Yes, we have the optional table for the blackToe, but we need to fabricate it, which only takes one day. We generally reserve one week for the total fabrication and packing of all parts.

    Click the link to respond:
    DO YOU HAVE BLACKTOES WITH TABLES?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.