Nucleus is the organelle of a living cell DNA is found.

Additional Information:


Additional Information:
nucleus


Additional Information:
qwertyuio

Click the link to add information to this solution:
IN WHICH ORGANELLE OF A LIVING CELL DNA FOUND?

There is very little radiofrequency (RF) energy exposure to people inside a building from a cellular base station located on its roof. There are several reasons for this. First, the transmitters operate at low power levels. Second, the antennas are normally mounted near the edges of the roof and are aimed away from the building. Third, most cellular transmitters use "high gain" or panel antennas. Such antennas transmit most of their energy in a narrow beam (in the vertical direction) from their front surfaces, away from the building. They radiate very little energy downwards towards the roof or backwards from their rear surfaces. Finally, building materials absorb a significant fraction of the RF energy passing through them. As a result, the RF signal levels at any location inside the building are invariably low and far below safety limits. The situation might be different in some locations on the roof itself. RF signal levels close to (within a few feet) and directly in front of cellular base station antennas can easily exceed safety limits. Some precautions are needed to prevent people from walking directly in front of the antennas while they are transmitting. This applies also to paging and other systems that use rooftop antennas, some of which transmit at higher power levels than many cellular base stations. Kenneth R. Foster, Ph.D.

Click the link to add information to this solution:
WHAT ARE THE HEALTH RISKS OF LIVING NEAR A CELL PHONE TOWER?

Yes, we have fully assembled machines that come complete with the spindle (and laser if needed) with sizes ranging from 1'x2' all the way up to 6'x12' or longer. We can also make custom fully assembled machines with other sizes. All of these machines are perfect for very intricate detailed work including but definitely not limited to sign making, bas relief, cabinetry, architectural model making, engraving, machine parts, automotive, custom sound enclosures (automotive or other), and other scientific application which we have delivered machine for many types of these applications.

Our machines are as follows (in order by size, larger at top):

The Fabricator Pro (although stated on the website at 4'x8') can be provided up to a 6'x12' (or longer) size. Call us for the price above the 4'x8' size.
https://www.buildyourcnc.com/item/cnc-machine-fabricator-pro-milling

The greenBull 4x, 5x or 6x CNC Machine is available fully assembled; however, you are responsible for building the table on this machine, but the price is considerably lower. The 4x, 5x, and 6x is a width specification and the length is determined by your table length.
4x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-4X-milling-hybrid
5x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-5X-milling-hybrid
6x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-6X-milling-hybrid

The 4'x8' greenLean CNC Router (Table bed is vertically oriented with a slant) fully assembled:
This machine is fully assembled with the overall frame. The customer would need to fasten the frame to the wall and affix a spoilboard to the bed.
https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1-milling

The 4'x8' Vertical Laser XL Laser Cutter and Engraver fully assembled:
https://www.buildyourcnc.com/item/cnc-machine-vertical-laser-xl-laser-cutter

The 4'x8' blackFoot CNC Router:
This machine requires a table to be built by the customer.
https://www.buildyourcnc.com/item/cnc-machine-blackFoot-v4-milling

The 2'x4' blackToe CNC router fully assembled complete with table:
https://www.buildyourcnc.com/item/cnc-machine-blacktoe-v4-2x4-milling

The blueChick CNC Router fully assembled completel with table:
https://www.buildyourcnc.com/item/cnc-machine-bluechick-v4-milling

Click the link to add information to this solution:
WHAT IS THE PRICE OF ASSEMBLED MACHINES COMPLETE?

Yes, we have fully assembled machines that come complete with the spindle (and laser if needed) with sizes ranging from 1'x2' all the way up to 6'x12' or longer. We can also make custom fully assembled machines with other sizes. All of these machines are perfect for very intricate detailed work including but definitely not limited to sign making, bas relief, cabinetry, architectural model making, engraving, machine parts, automotive, custom sound enclosures (automotive or other), and other scientific application which we have delivered machine for many types of these applications.

Our machines are as follows (in order by size, larger at top):

The Fabricator Pro (although stated on the website at 4'x8') can be provided up to a 6'x12' (or longer) size. Call us for the price above the 4'x8' size.
https://www.buildyourcnc.com/item/cnc-machine-fabricator-pro-milling

The greenBull 4x, 5x or 6x CNC Machine is available fully assembled; however, you are responsible for building the table on this machine, but the price is considerably lower. The 4x, 5x, and 6x is a width specification and the length is determined by your table length.
4x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-4X-milling-hybrid
5x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-5X-milling-hybrid
6x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-6X-milling-hybrid

The 4'x8' greenLean CNC Router (Table bed is vertically oriented with a slant) fully assembled:
This machine is fully assembled with the overall frame. The customer would need to fasten the frame to the wall and affix a spoilboard to the bed.
https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1-milling

The 4'x8' Vertical Laser XL Laser Cutter and Engraver fully assembled:
https://www.buildyourcnc.com/item/cnc-machine-vertical-laser-xl-laser-cutter

The 4'x8' blackFoot CNC Router:
This machine requires a table to be built by the customer.
https://www.buildyourcnc.com/item/cnc-machine-blackFoot-v4-milling

The 2'x4' blackToe CNC router fully assembled complete with table:
https://www.buildyourcnc.com/item/cnc-machine-blacktoe-v4-2x4-milling

The blueChick CNC Router fully assembled completel with table:
https://www.buildyourcnc.com/item/cnc-machine-bluechick-v4-milling

Click the link to add information to this solution:
WHAT IS THE PRICE OF ASSEMBLED MACHINES COMPLETE?

You can determine if the country is serviceable by:
- selecting the items you want to purchase on the website
- go to the cart (shopping cart top left of any webpage)
- log in, or register
- Enter the address and click on calculate shipping.

The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

The shipping times are determined by the service you select in the shopping cart. If a machine is purchased, we generally have a one week lead time unless otherwise stated in the description of the machine's product page.

Additional Information:

Click the link to add information to this solution:
WHAT IS THE SHIPPING COST OF MACHINE TO AUSTRALIA?

An axis is a direction of motion controlled by the CNC machine control. It can be linear (motion along a straight line) or circular (a rotary motion). The number of axes a machine has determines it's machining capabilities. A 2.5 axis machine really has three moving axes, but only two axes can move together (most machines sold today are full three axis machines). For machining centers, a three axis machine will have three linear axes. A four or five axis machine will have three linear axes as well as one or two rotary axes.

Note that 2.5 versus 3 axis has yet another context. 2.5 axis machining requires that the machine have three axes, but only two axes must be moving simultaneously at any one time. (Simple operations, like drilling and most milling, fall into this category). On the other hand 3-axis machining requires that all three axes be moving at the same time (More complex operations, like the machining of sculptured surfaces required in molds and airfoils, fall into this category.)

Additional Information:


Additional Information:

Click the link to add information to this solution:
WHAT IS THE DIFFERENCE IN A 2.5 AXIS MACHINE?

The blackfoot requires a total of 50 feet of cable.

The X axis needs 15 feet
The Y axis needs 17 feet
and the Z-axis needs 18 feet

These are 20 gauge 4 conductor cable.

Additional Information:

Click the link to add information to this solution:
WHAT LENGTH OF CABLE DO I NEED FOR A BLAKCFOOT

Depth of Field. This is how far the focal point goes before re-expanding again. With a 2" lens, you have approximately 2-3mm of DOF. This means that you'll have 2-3mm of perfectly focused laser before it starts to re-expand again. If you have a 4" lens, you will have up to 7mm of DOF.

Additional Information:

Click the link to add information to this solution:
WHAT IS D.O.F OR DEPTH OF FIELD FOR THE BLACKTOOTH LASER AND LENS?

The capital of norway is oslo.

Click the link to add information to this solution:
WHAT THE CAPITAL CITY OF NORWAY?

You can expect a two week lead time for the redFrog pick and place machine.

Additional Information:

Click the link to add information to this solution:
WHAT IS THE LEAD TIME FOR REDFROG?

You can expect a one week lead time for our machines.

Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
WHAT IS THE LEAD TIME FOR BLACKTOE?

You can expect a one week lead time for our machines.

Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
WHAT IS THE LEAD TIME FOR BLACKFOOT

There are almost no limits to the kind of materials you can machine. Anything from wood or plastic to exotic materials like stainless steel can be cut as long as the part can be safely and firmly held and the proper cutting tool and cutting speed are used

Click the link to add information to this solution:
WHAT KIND OF MATERIALS CAN MACHINE?

The lens is 20mm wide and a 50.6mm focal length (the one included). This lens will stand up to at least 30PSI air assist.

The mirrors are 25mm wide mirrors.

Focal length is the distance from the lens to the material for the laser converge into the best focal point. If a lens is listed as 2". You measure 2" from the lens to the material, this will be the tightest point the laser can go before it starts to re-expand again losing focus.

Click the link to add information to this solution:
WHAT IS LASER AND LENS FOCAL LENGTH?

You can expect a two week lead time for the redFrog pick and place machine.

Additional Information:

Click the link to add information to this solution:
WHAT IS THE PICK AND PLACE LEAD TIME?

Kidneys filter the blood.

Additional Information:


Additional Information:


Additional Information:
abc

Additional Information:
the kidneys

Click the link to add information to this solution:
WHAT PAIR OF ORGANS FILTER THE BLOOD?

Wellington is the capital of New Zealand.

Click the link to add information to this solution:
WHAT THE CAPITAL CITY OF NEW ZEALAND?

We provide a one year warranty from the date the item is delivered.

Click the link to add information to this solution:
WHAT IS THE WARRANTY ON YOUR PRODUCTS

We provide a one year warranty from the date the item is delivered.

Click the link to add information to this solution:
WHAT IS THE WARRANTY ON COMPLETE UNIT?