[ Log In ]
[ Register ]

Question #: 576

Question: WHAT IS THE LEAD TIME FOR BLACKFOOT

Current Solution

You can expect a one week lead time for our machines.

Respond:

Other Possible Solutions to this Question

  • WHAT IS THE LEAD TIME FOR BLACKTOE?

    You can expect a one week lead time for our machines.

    Click the link to respond:
    WHAT IS THE LEAD TIME FOR BLACKTOE?

  • WHAT IS THE LEAD TIME FOR BLACKTOE?

    You can expect a two week lead time for the redFrog pick and place machine.

    Click the link to respond:
    WHAT IS THE LEAD TIME FOR BLACKTOE?

  • WHAT IS THE LEAD TIME FOR REDFROG?

    You can expect a two week lead time for the redFrog pick and place machine.

    Click the link to respond:
    WHAT IS THE LEAD TIME FOR REDFROG?

  • WHAT IS THE LEAD TIME FOR REDFROG PICK AND PLACE MACHINE?

    You can expect a two week lead time for the redFrog pick and place machine.

    Click the link to respond:
    WHAT IS THE LEAD TIME FOR REDFROG PICK AND PLACE MACHINE?

  • WHAT'S THE LEAD TIME FOR REDFROG?

    You can expect a two week lead time for the redFrog pick and place machine.

    Click the link to respond:
    WHAT'S THE LEAD TIME FOR REDFROG?

  • WHAT CABLE LENGTHS SHOULD USE FOR THE BLACKFOOT CNC MACHINE

    The blackfoot requires a total of 50 feet of cable.

    The X axis needs 15 feet
    The Y axis needs 17 feet
    and the Z-axis needs 18 feet

    These are 20 gauge 4 conductor cable.

    Click the link to respond:
    WHAT CABLE LENGTHS SHOULD USE FOR THE BLACKFOOT CNC MACHINE

  • What is the z-axis max drop on the blackfoot?

    The Z-axis max drop with a table is 6", if you have a adjustable midsection or a hollow table, then your maximum is 6" - 3/4".

    Click the link to respond:
    What is the z-axis max drop on the blackfoot?

  • WHAT LEAD TIME CAN EXPECT FOR THE BLACKTOE MACHINE?

    You can expect a one week lead time for our machines.

    Click the link to respond:
    WHAT LEAD TIME CAN EXPECT FOR THE BLACKTOE MACHINE?

  • WHAT IS THE PICK AND PLACE LEAD TIME?

    You can expect a two week lead time for the redFrog pick and place machine.

    Click the link to respond:
    WHAT IS THE PICK AND PLACE LEAD TIME?

  • Do you make blackfoot with leadscrew for x and y axis?

    Currently we do not have any lead screw driven machines except our scratch build kit, all other models use either timing belt or are chain driven.

    Click the link to respond:
    Do you make blackfoot with leadscrew for x and y axis?

  • Do you make blackfoot with leadscrew for x and y axis?

    Currently we do not have any lead screw driven machines except our scratch build kit, all other models use either timing belt or are chain driven.

    Click the link to respond:
    Do you make blackfoot with leadscrew for x and y axis?

  • Is there an option for 4th axis on blackfoot?

    You can add a head stock and tail stock on the blackFoot by designing the table in a way the head and tail stock is positioned at the correct level so the end mill will be at the correct position. The correct position will depend on the end mills that you will be using. The end mill should be centered to the center of the head stock jaw near the lowest z-axis position.

    Click the link to respond:
    Is there an option for 4th axis on blackfoot?

  • WHAT LEAD TIME CAN EXPECT FOR BLACKTOE SO PICK UP THE MACHINE?

    You can expect a one week lead time for our machines.

    Click the link to respond:
    WHAT LEAD TIME CAN EXPECT FOR BLACKTOE SO PICK UP THE MACHINE?

  • what are all the settings i'd need for mach3 for use with a blackfoot and a redfly?

    These are the recommend values(default) for our blackFoot CNC machine, the acceleration and velocity can be adjusted as high as the motor can rotate without stalling! Suggested increment's will be by 10's.

    blackFoot:
    X-axis
    “CW8060 (6.0A) Driver”
    Set to 1/16 Microstep, 5.43A
    Dipswitches: 01100110 (“0”=down, “1”=up)
    Mach3 Motor Tuning: 914.29 steps/in, Velocity 400.02, Acceleration 4
    Y-axis
    “CW230 (3.0A) Driver”
    Set to 1/16 Microstep, 2.7A
    Dipswitches: 11001100
    Mach3 Motor Tuning: 1422.22 steps/in, Velocity 400.02, Acceleration 4
    Z-axis
    “CW230 (3.0A) Driver”
    Set to 1/4 Microstep, 2.7A
    Dipswitches: 10101100
    Mach3 Motor Tuning: 1600 steps/in, Velocity 79.98, Acceleration 5

    Additional Information:
    how can we tuning the CNC motor

    Click the link to respond:
    what are all the settings i'd need for mach3 for use with a blackfoot and a redfly?

  • I have a 4x8 CNC and would like to cut my own parts for the Blackfoot. What is the price for the plans and the electronics ?

    The available options for the blackFoot, is only structural components with hardware, and structure components/hardware with electronic components.
    However we currently do not have any plans available for public use/distribution.

    Click the link to respond:
    I have a 4x8 CNC and would like to cut my own parts for the Blackfoot. What is the price for the plans and the electronics ?

  • is there a DXF file for the vac brush assembly for Blackfoot 4.2

    We don't offer the dxf files for the parts of our machines; however, if you purchased this machine from us in the past, and you wish to cut this part on your machine, you can call our office and request the dxf file. We will provide an NDA for this type of transaction.

    Click the link to respond:
    is there a DXF file for the vac brush assembly for Blackfoot 4.2

  • I need a customised blackfoot without spindle but mount for vacuum pump pick and place.What software do I need and what's the quote

    We currently do not have that application implemented in our design. please suggest this in our R/D section (http://buildyourcnc.com/ResDev.aspx).

    Click the link to respond:
    I need a customised blackfoot without spindle but mount for vacuum pump pick and place.What software do I need and what's the quote

  • What is travel speed of the blackfoot machine ?? I read in a forum somewhere that it's around 100inches/minute. Is that accurate ??

    The jog speed of the blackToe is 1000 - 1500 ipm (inches per minute). I generally set this to about 700 ipm just to be safe and 700 ipm is plenty fast for most scenarios. The cutting speed will depend on the tool (end mill) that you will use for the application, the material being used and whether a spindle or router is used. In a scenario that a spindle is used and cutting relatively hard plywood at 3/4" full depth using an Onsrud 1/4" diameter compression end mill, you can cut at around 100 - 300 ipm. Using a router would be only half the speed and cutting depth due to the poor torque.

    Click the link to respond:
    What is travel speed of the blackfoot machine ?? I read in a forum somewhere that it's around 100inches/minute. Is that accurate ??

  • What electronics configuration is included with the blackfoot if I choose that option?

    There are three options on the blackFoot product page.

    Two options include either electronics that use the USB interface, or parallel interface. Both of these options include stepping motors (two 425 oz-in and one 651 oz-in), motor drivers (two 3.0 amp and one 6.0 amp), power supply and either a parallel breakout board, or USB breakout board. The USB interface must be used with the planet-cnc software. The parallel interface can be used in a wider variety of control software but will require a parallel port on your computer. If a parallel port doesn't exist, you can purchase a PCI parallel port adapter (for desktop computers only).

    The other option does not include electronics. This option is if you already have electronics, motors and drivers that will work with this machine, or you wish to purchase the redLeaf or redSprout assembled and plug and play CNC electronics and computer system.

    Click the link to respond:
    What electronics configuration is included with the blackfoot if I choose that option?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.