Other items you will need if you are purchasing the electronic combo (motors, drivers, power supply and computer interface) and the hardware and plans kit:

You will need the wood to create the structure of the machine. You will need a router to serve as the cutting instrument. You will need a computer to control the machine and the software that will serve as the control program. You will also need lead screws and rails (aluminum angles). If you intend to have faster travel than 20 ipm, we recommend purchasing the 5 start lead screws so you can achieve up to 300 ipm. https://www.buildyourcnc.com/item/mechanical-leadscrews-leadnuts-!5-5-starts-10-tpi

Click the link to add information to this solution:
if i purchase the 4 Axis Electronic Combos and the Combo #1 with hardware, plans and DVD what else do i need to have a complete cnc machine

Wood structural parts are not included with combo #1 kit. If you would like a kit that contains all of the structural parts, hardware and electronics, consider the 2'x4' kit at this link:
https://www.buildyourcnc.com/Item/cnc-machine-blacktoe-v4-2x4

Of if a smaller routing are is needed, consider this 1'x3' kit:
https://www.buildyourcnc.com/Item/cnc-machine-bluechick-v4

Click the link to add information to this solution:
from the pictures of your combo#1 with plans and DVD are any MDF parts included?

No the skirt does not come with the kit. Here's a link to where you can buy it https://www.buildyourcnc.com/item/strip-brush.

Click the link to add information to this solution:
does the skirt come with combo #1

Yes, you can use the Autodesk123D CNC Utility found here: http://www.123dapp.com/aboutcnc

This utility will work with any standard CNC machine. Our machines use standard electronics and you choose the software that controls the CNC machine.

Click the link to add information to this solution:
If I buy the Combo #1 with hardware, plans for $255.00 and get all the required parts, will i be able to use with Autodesk 123D?

Looks like you are trying to screw me out of $30 plus tax as there will be no pdf files forthcoming unless I shell out another $255. Unless you provide the pdf files I will be forced to seek return of funds and will be notifying VISA, GOOGLE PLAY and the BBB doing so until I get satisfaction. If you are not going to honor your book title by providing complete usable information you should remove your book from the market place, or offer it for free. At this point I don't know how you justify screwing your customers like this, but this one ain't going to take it laying down.

Additional Information:
Official Buildyourcnc response:
Thanks for informing us of this issue. Have you looked at this part of the wabsite:
https://www.buildyourcnc.com/Book.aspx

The link to the "book" portion of the website is in the footer of every page of the website. If there is a problem with the pdf documents on any page of this portion of the website, please let me know here. Many thanks, Patrick Hood-Daniel

Click the link to add information to this solution:
I PURCHASED YOUR BOOK TO BUILD A CNC ROUTER, THE PLAN DRAWINGS ARE INDECIPHERABLE AND TEXT WITH THEM IS ILLEGIBLE. THERE NOTE REFER MDF PARTS LAYOUT 1 PDF, 2 PDF PLANS & CUT LIST DOWNLOADABLE FROM THIS SITE. WHERE THEY CAN'T FIND THEM?

No the ZY plate is part of the machine kit not the head combo kit.

Click the link to add information to this solution:
DOES ZY PLATE COME WITH LASER HEAD COMBO.

Yes, you can use the Autodesk123D CNC Utility found here: http://www.123dapp.com/aboutcnc

This utility will work with any standard CNC machine. Our machines use standard electronics and you choose the software that controls the CNC machine.

Click the link to add information to this solution:
I buy the Combo #1 with hardware, plans for $255.00 and get all the required parts.please tell me what forms of payment as well as shipping costs like. huynhthachngockhai@gmail.com please contact email. Thank you

Yes, you can use the Autodesk123D CNC Utility found here: http://www.123dapp.com/aboutcnc

This utility will work with any standard CNC machine. Our machines use standard electronics and you choose the software that controls the CNC machine.

Click the link to add information to this solution:
I buy the Combo #1 with hardware, plans for $255.00 and get all the required parts.please tell me what forms of payment as well as shipping costs like. huynhthachngockhai@gmail.com please contact email. Thank you

No, at this time, we do not offer any .dxf or any other type of file to cut the pieces for the DIY Combo #1. Just the directions that you are already able to access with the dimensions in them.

Additional Information:

Click the link to add information to this solution:
Are there .dxf files or other files for the MDF parts in Combo #1 so that they may be cut using a CNC?

The kit was designed to be hand cut, however if you want to get a CNC machine to cut it, you will have to add the dimension(etc.) Into the code of the CNC machine software to process and cut the MDF.
Since we do not provide the files/code.

Click the link to add information to this solution:
Do you all provide files to cut the MDF parts in the combo #1 on a CNC instead of having to hand cut them?

The plans supplied with the DVD combo has the measurements and is built to spec. according to the manual. There may be dimensions missing from both of the download version and the physical plans that can be purchased; however, these measurements can be derived from other measurements on the page.

Click the link to add information to this solution:
The plans supplied for Combo #1 for download on the book page is missing some of the measurements. Is this PDF the same plans supplied when you purchase the dvd and plans? Is there a corrected plans file?

Yes, all of the spindles come with collets. The collets have a 1/4" (6.35mm) bore for end mills that have a 1/4" shank. The ER specification is different for the 1.5kW (ER-11) and the 2.2kW (ER-20).

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I’M LOOKING TO PURCHASE SPINDLE AND VFD WAS CURIOS IF THE SPINDLES COME WITH COLLETS SO WHICH ONES?

The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

Click the link to add information to this solution:
HOW COMPLEX IS YOUR KIT TO ASSEMBLE, AND MOST IMPORTANTLY - HARD IT SETUP CONTROL THE LASER WITH MACH3?

Yes, the CNC machine hardware and plans combo is the same machine as in the book. The machine that we provide the plans for, can be found on the website, here http://buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:



Additional Information:

Click the link to add information to this solution:
IS THE CNC MACHINE HARDWARE & PLANS COMBO SHOWN AT LINK YOU LISTED SAME DESCRIBED IN BOOK?

BYCNC Response:
The book build was intended to be 20 inches x 40 inches. Larger machines were designed after the book build was introduced so customers would have the option to go bigger than what the book offered. Check out our larger machines on the website as the machines sizes range from 1 foot x 3 feet all the way up to 6 feet x 12+ feet.

User Response:
I'm not wanting to spend $3,000+ on a machine, I want to build one that will do a 4x8 sheet of wood. Will the plans in the book scale up?

BYCNC Response:
It is possible to scale the book build up, but the rigidity of the gantry would be questionable at that span, even if the height of the gantry structure were to be increased. The gantry design would need to be modified to become a box shape rather than a flat configuration. The kits on the site were design for those wanting a larger machine.

Click the link to add information to this solution:
I BOUGHT YOUR BOOK AND WAS HOPEING IT HAD PLANS OR DIMENTIONS ON HOW TO BUILD A CNC HOLD 4X8 SHEET OF PLY. WILL THE IN SCALE UP?

Note that the plans(with DVD) is for a smaller scale machine and for DYI CNC from the ground up,

Here is the Plans with Hardware: (http://www.amazon.com/CNC-Machine-Hardware-and-Plans/dp/B005WD8WBO/ref=sr_1_1?ie=UTF8&qid=1407187007&sr=8-1&keywords=plans+and+hardware+kit+cnc)

Here is our blackToe 2' x 4': (http://www.amazon.com/CNC-Routing-Machine-Kit-BuildYourCNC/dp/B005VTB23O/ref=sr_1_1?ie=UTF8&qid=1407186874&sr=8-1&keywords=blacktoe+cnc)

Click the link to add information to this solution:
can you offer the blackToe 2'x4', Combo #1 (Plans with DVD) on amazon so I can use my amazon credit to purchase?

There are several CAD/CAM programs out there for MacOS. Here is a list of a few: http://www.macuser.de/forum/f53/3d-2d-cad-395058/#post4499316
I've also read good things about punchCAD: http://www.punchcad.com/
Of course, there is always SketchUp if you are in a pinch. There are a few CAM plugins for SketchUp as well, but I've never used them, so I can't vouch for them.

CAD/CAM will get you as far as designing your parts and producing the g-code, but if you also want to run the CNC machine with your Mac, you will need a piece of software similar to Mach3 or EMC to run the g-code. I haven't been able to find anything like these programs that runs on Mac, so you may have to run Mach3 or EMC in Windows using Boot Camp or a virtual machine such as VMware or Parallels.

Personally, I would use the Mac to do all the CAD/CAM, then use a cheap PC to run the CNC machine.

Additional Information:


Additional Information:
EasyDNC for OSX
www.dnc-x.com

Additional Information:


Additional Information:
Hi guys I’m new to the cnc and I’m beginning to learn how to operate and cad-cam software also my cnc runs on Mach3 my questions is if I should use MacBook to do all designs if I can have all this software to run on Mac or I have to use windows software to operate it? I have separate small computer connected to the cnc table who have Mach3 on it please help. Also if you know any other software much easy for beginners please let me know thank you guys!
My email if needed is r1jastrzebski@gmail.com

Additional Information:


Additional Information:
Hi , thank you for your advise!

Additional Information:
Hi , thank you for your advise!

Additional Information:
Hi , thank you for your advise!

Additional Information:
Hi , thank you for your advise!

Additional Information:

Click the link to add information to this solution:
DOES ANY OF THE SOFTWARE THAT COMES WITH IT COMPATIBLE MAC 10.6?

For the combo DVD there is 2 packages as seen on the website(https://www.buildyourcnc.com/cnckitintro.aspx) and on the DVD and plan combo you only get the plans and the DVD. However the combo with the hardware you will receive the Plans and Assembly DVD.

Screws:
#8 or #10 Screws 2" in length- 12
1/4" diameter - Pan Head
1" - 12
1 1/2" - 6
2" - 20
3" - 8
1/4" Diameter - Angled Head 1" - 16
Bolts:
1/4" Diameter
1" - 10
1 1/2" - 6
2" - 28
5/16" - Diameter
3/4" - 24
Nuts:
#8 or #10 - 36
1/4" - 30
5/16" - 24
1/2" - 15 (13 TPI Allthread Compatible, not ACME Precision)
Cross dowels - 52
Mechanical:
Couplings 1/4" to 1/2" with center bunas - 3
Bearings 1/2" Inside Diameter - 6
Bearings 5/16" Inside Diameter - 24
Aluminum Angles to serve as bearing trucks - 6

Click the link to add information to this solution:
What is on the combo #1 dvd?

A cell phone emits electromagnetic radiation of various frequencies at very low intensity and would not affect the development of a fetus whose mother placed the cell phone on her abdomen during her pregnancy. The mother's reproductive and developmental risk for her growing embryo would not be altered by these exposures. If you are healthy, young, and have no reproductive problems or family history of reproductive or developmental problems, your risk for birth defects is 3% and for miscarriage, 15%. These are background risks with which every woman begins her pregnancy. Neither you nor I can change these risks. Good luck with your pregnancy.

Robert Brent, MD, PhD

Click the link to add information to this solution:
DOES CELL PHONE VIBRATION ON YOUR STOMACH DURING PREGNANCY AFFECT THE BABY?