The biggest state is the USA is Alaska.

Click the link to add information to this solution:
WHAT THE BIGGEST STATE IN U.S.A.?

Amazon and the Nile are the longest rivers in the world.

Click the link to add information to this solution:
THE LONGEST RIVER IN WORLD IS

Mount Everest

Click the link to add information to this solution:
THE HIGHEST MOUNTAIN IN WORLD

Trans-Canada

Click the link to add information to this solution:
THE LONGEST HIGHWAY IN WORLD IS

Mount Everest

Click the link to add information to this solution:
THE HIGHEST MOUNTAIN IN WORLD IS

Amazon and the Nile are the longest rivers in the world.

Click the link to add information to this solution:
NAME THE TWO LONGEST RIVERS IN WORLD.

Russia has the biggest land area.

Click the link to add information to this solution:
WHICH COUNTRY HAS THE BIGGEST LAND AREA?

Grand Central Terminal, Park Avenue, New York is the largest railway station.

Click the link to add information to this solution:
WHICH RAILWAY STATION THE LARGEST IN WORLD?

Asia has the biggest population.

Click the link to add information to this solution:
WHICH CONTINENT HAS THE BIGGEST POPULATION?

Brazil

Click the link to add information to this solution:
THE LARGEST COFFEE GROWING COUNTRY IN WORLD

Boxing is the sport Muhammad Ali was the world champion.

Additional Information:
Where was ricky martin born

Additional Information:

Click the link to add information to this solution:
IN WHICH SPORT WAS MUHAMMAD ALI THE WORLD CHAMPION?

Africa contains the Sahara Desert.

Additional Information:

Click the link to add information to this solution:
ON WHICH CONTINENT THE SAHARA DESERT?

Boxing is the sport Muhammad Ali was the world champion.

Additional Information:
Where was ricky martin born

Additional Information:

Click the link to add information to this solution:
WHAT SPORT WAS MUHAMMAD ALI THE WORLD CHAMPION?

The cutting tool is an end mill (it looks like a drill bit). It is a cutting tool that can plunge and cut sideways. That item is not included and is a consumable. You will purchase these very frequently and will have geometry that is very specific to how you apply the cnc machine.

Additional Information:

Click the link to add information to this solution:
IS DRILL BIT USED IN THE CNC MACHINE?

The base greenLean CNC Machine Kit package includes:
- Structure (all of the structural parts that make up the gantry and rib system). The structure does not include the spoilboard.
- Hardware (All of the fasteners, like screws, nuts, cross dowels, washers, etc.)
- Mechanical components (bearings, rails, sprockets, shafts, etc.)
- Electronics (3 NEMA 651 Motors, 3 6.0 Amp drivers power supply, interface card to connect the drivers to a computer, and 91 feet of motor cable. Hookup wire to connect the electronics is not included.)
- 2.2kw Spindle and VFD

Here is a link to the greenLean CNC Macnine page: https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1

Click the link to add information to this solution:
WHAT COMES IN THE BOX FOR BASIC GREENLEAN?

Influenza is the most frequent cause of death from a vaccine-preventable disease in the United States. From 1990 through 1999, an average of approximately 36,000 influenza-associated pulmonary and circulatory deaths occurred during each influenza season. In addition to fatalities, seasonal influenza is also responsible for more than 200,000 hospitalizations per year. Rates of infection from seasonal influenza are highest among children, but the risks for complications, hospitalizations, and deaths are higher among adults ages 65 and older, children younger than 5 years, and people of any age who have medical conditions that place them at increased risk for complications from influenza.

A novel H1N1 virus was first detected in March of 2009 and quickly spread to pandemic levels. In the U.S., it is estimated that approximately 43-89 million persons became ill with 2009 pandemic H1N1 from April 2009 to April 2010. The virus also resulted in significant hospitalizations and deaths among children, adults 19-65 years, obese persons, and pregnant and post-partum women.

Click the link to add information to this solution:
HOW SERIOUS A PROBLEM INFLUENZA IN THE U.S.?

Basketball is the most popular indoor sport in the USA

Additional Information:
boxing

Additional Information:
boxing

Additional Information:
boxing

Additional Information:
Basketball


Additional Information:
Basketball


Additional Information:
Which indoor sport is the most popular in the US

Additional Information:
Who recorded A Boy Named Sue

Click the link to add information to this solution:
WHAT THE MOST POPULAR INDOOR SPORT IN U.S.A.?

If you use the 2.2kW spindle, it can cut at 3/4 inch or 19 mm deep with at least a 1/4" cutting diameter single flute end mill. You will get better results with larger diameter end mills, but that is the worst case scenario. I still recommend doing a finishing pass on the edge to make sure everything is perfect.

Click the link to add information to this solution:
CAN THE GREENBULL CUT 18MM BIRCH IN ONE PASS?

An axis is a direction of motion controlled by the CNC machine control. It can be linear (motion along a straight line) or circular (a rotary motion). The number of axes a machine has determines it's machining capabilities. A 2.5 axis machine really has three moving axes, but only two axes can move together (most machines sold today are full three axis machines). For machining centers, a three axis machine will have three linear axes. A four or five axis machine will have three linear axes as well as one or two rotary axes.

Note that 2.5 versus 3 axis has yet another context. 2.5 axis machining requires that the machine have three axes, but only two axes must be moving simultaneously at any one time. (Simple operations, like drilling and most milling, fall into this category). On the other hand 3-axis machining requires that all three axes be moving at the same time (More complex operations, like the machining of sculptured surfaces required in molds and airfoils, fall into this category.)

Additional Information:


Additional Information:

Click the link to add information to this solution:
WHAT IS THE DIFFERENCE IN A 2.5 AXIS MACHINE?