The length of time it will take to build a CNC machine kit is not an easy answer. There may be a wide array of circumstances that limit a persons abilities to build the cnc machine kit in an efficient timeframe; however, if you have moderate dexterity and moderately mechanically inclined, you should have no problem building one of our machines within one weekend if the project has very little downtime.

Additional Information:

Click the link to add information to this solution:
HOW LONG WOULD IT TAKE FOR MY TO BUILD A MACHINE?

The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

Click the link to add information to this solution:
HOW DIFFICULT IS IT TO BUILD THE BLACKTOOTH

Unfortunately I am not able to give an estimate of shipping time. This is because there are multiple shipping options, Some of them cost more than others, but ensure the package arrives in a certain number of days. Others do not give a number of days, and many factors could change the length of shipping time, such as weather, or busy season. It would be best to choose an option you are comfortable with the price of, and then Google search the typical times it takes for that option to get to you, or call the shipping company and request that estimated time from them.

Additional Information:

Click the link to add information to this solution:
HOW LONG DOES IT TAKE TO SHIP

The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

Click the link to add information to this solution:
HOW DIFFICULT IS IT TO BUILD THE BLACKTOOTH LASER CUTTER?

The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
HOW LONG SHOULD THE MOTOR CABLES BE FOR BLACKTOE

Yes, we have the optional table for the blackToe, but we need to fabricate it, which only takes one day. We generally reserve one week for the total fabrication and packing of all parts.

Click the link to add information to this solution:
DO YOU HAVE BLACKTOE MACHINES WITH TABLES READY TO GO OR HOW LONG DOES IT TAKE MAKE ONE?

The average lifespan of a tube is 1000-1500 hours IF ran at a max of 16mA for most of it's life. It's life will go down if you run constantly at it's max rating.

CO2 laser tubes also have a shelf life. So make sure to only buy a replacement tube close to when you plan to install it, keeping it on a shelf for the future will only compromise it's life span.

To measure your amperage going through your system. You go from the negative line of the tube and run it THROUGH your multimeter/ammeter and back out to the laser PSU. This will give you your amp usage. It will not hurt your multimeter either. Just be sure your connections are very snug since 20,000V is liable to arc very easily if a connection comes loose.

Additional Information:
what is life span of CO2 generator in videojet laser coding machineVJ3320

Click the link to add information to this solution:
HOW LONG DOES THE TUBE LAST?

Yes, it is ok if the thickness is plus or minus +/- about 2mm.

Additional Information:



Additional Information:

Click the link to add information to this solution:
THICKER MATERIAL OK TO BUILD THE MACHINE?

BYCNC Response:
The book build was intended to be 20 inches x 40 inches. Larger machines were designed after the book build was introduced so customers would have the option to go bigger than what the book offered. Check out our larger machines on the website as the machines sizes range from 1 foot x 3 feet all the way up to 6 feet x 12+ feet.

User Response:
I'm not wanting to spend $3,000+ on a machine, I want to build one that will do a 4x8 sheet of wood. Will the plans in the book scale up?

BYCNC Response:
It is possible to scale the book build up, but the rigidity of the gantry would be questionable at that span, even if the height of the gantry structure were to be increased. The gantry design would need to be modified to become a box shape rather than a flat configuration. The kits on the site were design for those wanting a larger machine.

Click the link to add information to this solution:
I BOUGHT YOUR BOOK AND WAS HOPEING IT HAD PLANS OR DIMENTIONS ON HOW TO BUILD A CNC HOLD 4X8 SHEET OF PLY. WILL THE IN SCALE UP?

Yes, it is ok if the thickness is plus or minus +/- about 2mm.

Additional Information:



Additional Information:

Click the link to add information to this solution:
IT OK TO USE THICKER PLYWOOD (MATERIAL) BUILD THE CNC MACHINE, BLACKFOOT, BLACKTOE?

Vines are normally planted bare root from January to March and spaced 7 to 8 feet apart in rows 10 to 12 feet apart. Vertical stakes or posts with 1 or 2 wires on the side, or with “T” tops with wire are desirable supports for grapevines. Cane prune Thompson seedless and Concord. Spur prune other varieties. Frost (31oF) damages new shoots and fruit clusters in April or May, so plant where the frost is minimized. Spraying or dusting sulfur for mildew is necessary on wine and table grapes, but rarely needed with American types. (From http://ucce.ucdavis.edu/files/filelibrary/40/935.pdf )

Click the link to add information to this solution:
HOW SHOULD I CARE FOR MAY GRAPEVINES?

The greenlean requires 56 feet of 1/4 Inside Diameter and 3/8 Outside Diameter silicon tube for the spindle.

Additional Information:
20

Additional Information:
20

Click the link to add information to this solution:
HOW MUCH SILICONE TUBE DO I NEED FOR A GREEN LEAN TO CONNECT THE SPINDLE

The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
HOW MUCH MOTOR CABLE FOR THE BLACKFOOT?

Yes, it is ok if the thickness is plus or minus +/- about 2mm.

Additional Information:



Additional Information:

Click the link to add information to this solution:
is IT OK TO USE THICKER PLYWOOD (MATERIAL) to BUILD THE CNC MACHINE, BLACKFOOT, BLACKTOE?

Protection from influenza vaccine is thought to persist for a year or less because of waning antibody and because of changes in the circulating influenza virus from year to year.

Click the link to add information to this solution:
HOW LONG DOES IMMUNITY FROM INFLUENZA (FLU) VACCINE LAST?

Under Connection -> Serial, configure the correct settings for the data frame

Under Session, select Serial, the serial line "com" and speed should reflect the information set in the connection -> serial.

Click the "Open" button to start the communication.

Additional Information:

Click the link to add information to this solution:
HOW DO START PUTTY FOR SERIAL COMMUNICATION?

Under Connection -> Serial, configure the correct settings for the data frame

Under Session, select Serial, the serial line "com" and speed should reflect the information set in the connection -> serial.

Click the "Open" button to start the communication.

Additional Information:

Click the link to add information to this solution:
HOW DO SET UP PUTTY FOR SERIAL COMMUNICATION?

The blackfoot requires a total of 50 feet of cable.

The X axis needs 15 feet
The Y axis needs 17 feet
and the Z-axis needs 18 feet

These are 20 gauge 4 conductor cable.

Additional Information:

Click the link to add information to this solution:
HOW MUCH MOTOR CABLE DO I NEED FOR A BLACKFOOT

Input to VFD:
240V Active - R
240V Neutral - S
Ground - E

Additional Information:

Click the link to add information to this solution:
HOW TO CONNECT THE INVERTER WALL?