[ Log In ]
[ Register ]
Type K Thermocouple Temperature Sensor Type K thermocouple - view of probes.
Type K Thermocouple Temperature Sensor Type K thermocouple - view of probes.
Price Options Your Cart $0.00
Type K Thermocouple - Temperature Sensor
$4.95
Introduction:

Type K Thermocouple Temperature Sensor. 1 meter length. A general purpose thermocouple with probes for temperature sensing.

Description:

The Type K Thermocouple is a common purpose sensor for temperature reading. The cable length is 1 meter.

Related Tutorials
blacktoe build from Katy Makerspace - all parts laid out on a table. Katy Makerspace blackToe Build Part 1
We're proud to be affiliated with the Katy Makerspace. We recently provided them with a blackToe for their members to use. In this first part we'll be examining how they went about organizing parts for the initial build, as well as constructing the table.
Steve Hobley's Fabrications Using the blackToe CNC Machine
Steve Hobley has done many projects using his blackToe Machine, including a Theremin Stand and a spectacular wooden geared clock.
Step 29: Heat Sink and Driver Connections
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. Yes, we've used heat shrink, but now it's time for a heat sink. No, it's not a hot tub. A heat sink is usually a piece of metal that allows something that gets hot to dissipate the heat. It is advised for the three driver chips on the HobbyCNC board. The installation is straight forward. Holes are marked and then drilled. It is important to note that the drill will create many metal shavings. Metal shavings are incompatible to the proper functioning of the driver board. If any of those shavings get on the board, you will risk a blown chip. Before final installation of the heat sink, a white compound should be spread between the component and the metal, like a peanut butter sandwich.