[ Log In ]
[ Register ]
Laser Lens and mirror mount (nozzle)
Laser Lens and mirror mount (nozzle)
Price Options Your Cart $0.00
Laser Head Mount for 20mm Lens and 20mm Final Mirror - CURRENTLY OUT OF STOCK
$75.00
Laser Head Mount for 20mm lens and 25mm final mirror
$75.00
Introduction:

A 20mm lens and final mirror needs to be mounted in this part. The lens mounts in the tapered (conical) section of this part. Notice the component showing partly blue. This is the air assist tube inlet fitting.

Description:

The air is pumped into the conical section of the nozzle and creates a positive air pressure inside this area and doesn't let particles (smoke and dust) near the lens. The air assist will also mitigate flare-ups and if strong enough, can clean the area that is being marked by the laser. This product includes the Nozzle Tube Fitting for Air Assist.

Related Tutorials
Laser mirror alignment Laser Mirror Alignment Tutorial for Vertical Laser XL
In this series we'll be explaining how to align the laser mirrors on your Vertical Laser XL machine. Note that these techniques can also be used for alignment on the blackTooth laser cutter and engraver.
Laser Controller Tutorial Part 2: Connecting the Stepper Motor Drivers
In this series we'll be examining how to install the laser control unit. We will start with the basic wiring and move all the way up to software and functions.
Laser Controller Tutorial Part 3: Wiring Motors to Drivers and Calculating Steps Per Inch
In this series we'll be examining how to install the laser control unit. We will start with the basic wiring and move all the way up to software and functions.