Step 36 - Software Toolchain Part 3 - The toolchain concept
At this point, you should have the control software that is described in Software Part 1 and Software Part 2. Software part 1 shows the process to install Mach3 and Software Part 2 shows the process to install a Linux control software application called EMC2. If you're still unsure what I'm talking about, then here is my detailed explanation of the entire workflow. Later posts will go into greater detail and tutorial on each program.

Installing the Spoilboard on the greenLean CNC Machine
Here is a tutorial on setting and permanently mounting the Spoilboard on the greenLean 4x8 Vertical CNC Machine. We recommend you use a 2nd person to help you lift and place the board. You should also mount your machine to the wall before permanently attaching the Spoilboard.

Laser Mirror Alignment Tutorial for Vertical Laser XL
In this series we'll be explaining how to align the laser mirrors on your Vertical Laser XL machine. Note that these techniques can also be used for alignment on the blackTooth laser cutter and engraver.