[ Log In ]
[ Register ]
variant image of LMT Onsrud 37-35 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, .090 primary image of LMT Onsrud 37-35 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, .090 variant image of LMT Onsrud 37-35 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, .090 variant image of LMT Onsrud 37-35 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, .090
variant image of LMT Onsrud 37-35 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, .090 primary image of LMT Onsrud 37-35 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, .090 variant image of LMT Onsrud 37-35 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, .090 variant image of LMT Onsrud 37-35 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, .090
Introduction:

LMT Onsrud 37-35 LMT Onsrud 37-35 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, .090" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1)

Description:

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Half round engraving tool. Use for wood, plastic, aluminum and solid surface. Single flute, 30 degree angle. 0.090" Tip diameter, 1/4" shank diameter, 2" overall length.

Related Tutorials
Laser mirror alignment Laser Mirror Alignment Tutorial for Vertical Laser XL
In this series we'll be explaining how to align the laser mirrors on your Vertical Laser XL machine. Note that these techniques can also be used for alignment on the blackTooth laser cutter and engraver.
Thumbnail: greenLean instructional image Installing the Spoilboard on the greenLean CNC Machine
Here is a tutorial on setting and permanently mounting the Spoilboard on the greenLean 4x8 Vertical CNC Machine. We recommend you use a 2nd person to help you lift and place the board. You should also mount your machine to the wall before permanently attaching the Spoilboard.
Step 36 - Software Toolchain Part 3 - The toolchain concept
At this point, you should have the control software that is described in Software Part 1 and Software Part 2. Software part 1 shows the process to install Mach3 and Software Part 2 shows the process to install a Linux control software application called EMC2. If you're still unsure what I'm talking about, then here is my detailed explanation of the entire workflow. Later posts will go into greater detail and tutorial on each program.
Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.