[ Log In ]
[ Register ]
Mini binding post with tin contact looking towards the screw end Mini binding post with tin contact looking at the post side. Mini binding post with tin contact looking at the back of the screw terminal The mini binding post applied to the laser tube on the high tension line Binding post applied to the laser tube
Mini binding post with tin contact looking towards the screw end Mini binding post with tin contact looking at the post side. Mini binding post with tin contact looking at the back of the screw terminal The mini binding post applied to the laser tube on the high tension line Binding post applied to the laser tube
Price Options Your Cart $0.00
Post with screw terminal
$0.60
Introduction:

Soldering to the tungsten lead of a laser tube can be a frustrating ordeal. Use this post with a screw terminal to make the soldering easier and create a non permanent connection at the same time!

Description:

The mini binding post with tin contact will allow you to solder a wire on the post side and screw a wire into the other side. This allows you to disconnect the screw side anytime you want.

If this binding post is used with your laser tube, you will be able to change the laser tube much easier just by unscrewing the terminal from the tungsten lead and the new tube can be inserted without re-soldering the wire to the tungsten lead.

Related Tutorials
Laser mirror alignment Laser Mirror Alignment Tutorial for Vertical Laser XL
In this series we'll be explaining how to align the laser mirrors on your Vertical Laser XL machine. Note that these techniques can also be used for alignment on the blackTooth laser cutter and engraver.
Vertical Laser XL graphic Press Release: BuildYourCNC Announces New Vertically-Oriented Laser Engraving Machine
BuildYourCNC is pleased to announce the new Vertical Laser XL: 4x8 80W CO2 Laser Engraver.
Laser Controller Tutorial Part 1: Wiring
In this series we'll be examining how to install the laser control unit. We will start with the basic wiring and move all the way up to software and functions.