[ Log In ]
[ Register ]
Price Options Your Cart $0.00
Porter Cable 690 / 7500 Series without nut
$25.95
Bosch (1617/1618/1619) without nut
$25.95
Bosch (1617/1618/1619) with Collet Nut
$50.95
Porter Cable 690 / 7500 Series with Collet Nut
$50.95
Introduction:

This collet will accept tools with a 1/4" shank (the shank is the smooth part of the bit that is inserted into the collet). If you don't have the nut below, make sure you get that too. This is a clamping precision grade collet with a TIR (Total Indicated runout) of less than 0.0004 inches (PG - Precision Grade). NOTE: We no longer carry collets and nuts for Porter Cable 890 Series or Bosch Colt (PR20EVSK) series

Description:

Accepts 1/4" shank
Available for:
Bosch 1617/1618/1619 series
Porter Cable 690 /7500 series

Related Tutorials
Thumbnail: greenLean instructional image Installing the Spoilboard on the greenLean CNC Machine
Here is a tutorial on setting and permanently mounting the Spoilboard on the greenLean 4x8 Vertical CNC Machine. We recommend you use a 2nd person to help you lift and place the board. You should also mount your machine to the wall before permanently attaching the Spoilboard.
Laser mirror alignment Laser Mirror Alignment Tutorial for Vertical Laser XL
In this series we'll be explaining how to align the laser mirrors on your Vertical Laser XL machine. Note that these techniques can also be used for alignment on the blackTooth laser cutter and engraver.
Step 36 - Software Toolchain Part 3 - The toolchain concept
At this point, you should have the control software that is described in Software Part 1 and Software Part 2. Software part 1 shows the process to install Mach3 and Software Part 2 shows the process to install a Linux control software application called EMC2. If you're still unsure what I'm talking about, then here is my detailed explanation of the entire workflow. Later posts will go into greater detail and tutorial on each program.