[ Log In ]
[ Register ]

Laser Components

Below you will find all of the laser components you will need to start lasing. In a general system for 2 axes you will need one (1) laser tube and laser tube power supply, two (2) mirror mounts, three (3) mirrors, one laser nozzle also called laser head (where the final mirror and lens is held) and one (1) lens. Don't forget to pick up the motion electronics. You will need two stepper motors, two stepper motor drivers, one power supply and one interface card (prallel breakout, or USB breakout).

Price Options Your Cart
Gold Plated 20mm Laser Mirror

$30.00
Qty:

This mirror is mounted within a mount for 20mm and 25mm mirror sizes. The mirror has high reflectivity and is gold plated for this reason.

Click here for more information on this product.

Price Options Your Cart
40 Watt CO2 Laser Tube

$250.00
Qty:

This is the component that contains the CO2 (Carbon Dioxide) that is excited by the voltage coming from the 40W Power Supply. The diameter of the tube is 50mm (approximately 2 inches). The length of the tube is 712mm (28 inches) This CO2 Laser Tube has an inlet and outlet for water cooling and wire connections for the anode and cathode sides of the tube.

Click here for more information on this product.

Price Options Your Cart
40 Watt CO2 Laser Tube Power Supply - 220V

$200.00
Qty:

These 40 watt laser tube power supplies are available in 110 or 220 input voltage. The power supply comes with a fan to provide cooling, two banks of terminals, a test firing button for testing laser output, and connection for the laser high-tension line.

Click here for more information on this product.

Price Options Your Cart
50K Potentiometer Panel Mount (Non Trimmer)

$1.49
Qty:

A three terminal resistor that serves as a voltage divider and a variable resistor (rheostat). Also functions as a position transducer when operated by a mechanism. Perfect for Joystick modding.

Click here for more information on this product.

Price Options Your Cart
50K Potentiometer Panel Mount (Non Trimmer) With Knob

$2.45
Qty:

50K Potentiometer Kit. Includes Small adjustable knob for sleeker look and easier, more accurate operation.

Click here for more information on this product.

Price Options Your Cart
5K Potentiometer - Rotary

$0.95
Qty:

A three terminal resistor that serves as a voltage divider and a variable resistor (rheostat). Also functions as a position transducer when operated by a mechanism. Perfect for Joystick modding.

Click here for more information on this product.

Price Options Your Cart
80W CO2 Laser Tube

$599.00
Qty:

This is the component that contains the CO2 (Carbon Dioxide) that is excited by the voltage coming from the 80W Power Supply. The diameter of the tube is 80mm (approximately 3.15 inches). The length of the tube is 1250mm (approximately 49.2 inches) This CO2 Laser Tube has an inlet and outlet for water cooling and wire connections for the anode and cathode sides of the tube.

Click here for more information on this product.

Price Options Your Cart
80W CO2 Laser Power Supply - 110V

$299.99
Qty:

Connect this power supply to an 80 Watt CO2 Laser Tube to create the lasing. Currently these are for 110v mains but we will be stock 220v versions in the near future.

Click here for more information on this product.

Price Options Your Cart
CO2 Laser 50.80mm (2 inch) Focal Length Lens 20mm Diameter

$95.00
Qty:

The lens is the final component that the laser beam will pass until it hits the surface of the workpiece. This lens has a focal length of 50.80mm or 2 inches. The diameter of the lens is 20mm. Make sure to get/make the correct nozzle that has a 20mm seat for the lens.

Click here for more information on this product.

See instructions for this product.
Price Options Your Cart
Honeywell Laser CO2 Goggles

$85.00
Qty:

These goggles are made to help protect your eyes from the wavelength(s) of the laser. Please always make sure you are wearing protective eyewear when running our blackTooth. The manufacturer of these goggles is Honeywell. The appearance of these goggles may differ from the image of frame color. Specs for the CO2 Goggles are as follows: OD> 9 @ 190-360NM, OD> 5 @ 9.000-11, 100NM OD > 7 @ 10, 600NM, 9000-1000 DILB 3 GPT S CE

Price Options Your Cart
Industrial Water Chiller - 110V

$399.99
Qty:

This is an industrial water chiller used to circulate coolant to a 60-80W CO2 laser tube. These chillers are specifically made to work on 110v mains.

Click here for more information on this product.

Price Options Your Cart
Laser Connector Wire to Power Supply

$19.95
Qty:

This is a laser connector wire which connects the power supply high tension line to the laser tube

Click here for more information on this product.

Price Options Your Cart
Laser Control System - Comes With Everything Shown in Pictures

$449.99
Qty:

This is a complete control unit for a laser system. It comes with a control box and LCD panel. This control unit will allow you to run a file directly without needing an external computer. It will also allow for laser power intensity to be adjusted within the software rather than manually.

Click here for more information on this product.

Price Options Your Cart
Mirror Mount for 20mm Mirrors

$40.00
Qty:

This is the holder of 20mm and 25mm mirrors. The mirror mount has a seat for the mirror behind the large cylindrical part at the front. There are two screws in the back for minor adjustment of the angle of the mirror. There are M6 threaded holes on two sides of the mount for attaching to a machine or other device.

Click here for more information on this product.

Price Options Your Cart
Laser Head Mount for 20mm Lens and 20mm Final Mirror - CURRENTLY OUT OF STOCK

$75.00
Qty:

A 20mm lens and final mirror needs to be mounted in this part. The lens mounts in the tapered (conical) section of this part. Notice the component showing partly blue. This is the air assist tube inlet fitting.

Click here for more information on this product.

Price Options Your Cart
Laser Nozzle Tube Fitting For Air Assist

$4.95
Qty:

This is the air assist tube inlet fitting used with our blackTooth Laser Cutter and is installed at the nozzle of the laser head (where the lens is located).

Click here for more information on this product.

Price Options Your Cart
Post with screw terminal

$0.60
Qty:

Soldering to the tungsten lead of a laser tube can be a frustrating ordeal. Use this post with a screw terminal to make the soldering easier and create a non permanent connection at the same time!

Click here for more information on this product.

Price Options Your Cart
Small Knob for Potentiometer - Black with Red Cap

$0.94
Qty:

This small knob will fit onto a standard potentiometer knob to provide a more aesthetically pleasing look and an easier grip. The single adjustment indicator line helps in determining adjustment position. .63" (16mm) Diameter X .59" (15mm) Height.

Click here for more information on this product.

Price Options Your Cart
Black Laser CO2 Goggles - Tinted

$55.00
Qty:

These safety goggles are made to help protect your eyes from the 10500nm or 10.5um wavelength(s) of the laser.

Click here for more information on this product.