HOW DO I SET UP MY MOTOR DRIVERS?

blueChick: X-axis “CW230 (3.0A) Driver” Set to 1/16 Microstep, 2.7A Dipswitches: 11001100 Mach3 Motor Tuning: 1422.22 steps/in Y-axis “CW230 (3.0A) Driver” Set to 1/16 Microstep, 2.7A Dipswitches: 11001100 Mach3 Motor Tuning: 1422.22 steps/in Z-axis “CW230 (3.0A) Driver” Set to 1/4 Microstep, 2.7A Dipswitches: 10101100 Mach3 Motor Tuning: 1600 steps/in blackToe: X-axis “CW230 (3.0A) Driver” Set to 1/16 Microstep, 2.7A Dipswitches: 11001100 Mach3 Motor Tuning: 1422.22 steps/in Y-axis “CW230 (3.0A) Driver” Set to 1/16 Microstep, 2.7A Dipswitches: 11001100 Mach3 Motor Tuning: 1422.22 steps/in Z-axis “CW230 (3.0A) Driver” Set to 1/4 Microstep, 2.7A Dipswitches: 10101100 Mach3 Motor Tuning: 1600 steps/in blackFoot: X-axis “CW8060 (6.0A) Driver” Set to 1/16 Microstep, 2.7A Dipswitches: 11001100 (“0”=down, “1”=up) Mach3 Motor Tuning: 914.29 steps/in Y-axis “CW230 (3.0A) Driver” Set to 1/16 Microstep, 2.7A Dipswitches: 11001100 Mach3 Motor Tuning: 1422.22 steps/in Z-axis “CW230 (3.0A) Driver” Set to 1/4 Microstep, 2.7A Dipswitches: 10101100 Mach3 Motor Tuning: 1600 steps/in greenBull: X-axis “CW8060 (6.0A) Driver” Set to 5.43A, 1/16 Microstep Dipswitches: 01100110 (“0”=down, “1”=up) Mach3 Motor Tuning: 914.29 steps/in Y-axis “CW8060 (6.0A) Driver” Set to 5.43A, 1/16 Microstep Dipswitches: 01100110 Mach3 Motor Tuning: 914.29 steps/in Z-axis “CW8060 (6.0A) Driver” Set to 5.43A, 1/4 Microstep Dipswitches: 01100100 Mach3 Motor Tuning: 1600 steps/in

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.