I have Nema 34 motors but I need the electrical components do you have a kit without motors included?

If you are looking for the drivers to pair with NEMA 34 stepper motors, you can find the 6.0 amp drivers here: https://www.buildyourcnc.com/item/electronicsAndMotors-stepper-driver-6!0a The other electronics to send the signals to the 6.0 amp drivers (the control board that operates with the control software) is subject to personal preference, but here they are listed: Our breakout board (works with Mach3 and LinuxCNC and requires a parallel port on your computer): https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay The PoKeys57CNC (works with Mach3 and Mach4): https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board Generic USB breakout board (works with Mach3): https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board Additional Information: Do I need a driver for every motor or can I use one driver for all four motors Additional Information: Each motor needs its own driver.