Please send a diagram of connections for pokeys57cnc to YL-620 VFD for Mach4

When you install Mach4 and use the Pokeys57cnc, you will use the plug-in provided by Polabs. You can get this plug-in here: https://www.poscope.com/product/pokeys57cnc/ The Pokeys57cnc has a 0-10V output pin (a pulse width modulated (PWM) output pin) labeled onthe diagram as pin 17. You can see this pin at the top of the diagram here: https://buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board In Mach4, you will need to set the spindle speed output top this pin #17. In the plug-in, set this pin at 10kHz.