[575] After reset of E stop, I get error message "RnR Motion Card Not Found". Have you any advice?

If you are getting the message RNR Motion Card Not Found, the controller is shorting. Check the wiring to make sure you have all of the correct wires in the correct terminals. Check the voltages of all the terminals to make sure everything shows the correct polarity and voltages. Additional Information: Mine did the same thing. Try pushing the USB cable all the way into the port and slightly up. My usb port on the card is slightly oversized and breaking the connection. Ordering some USB type B connectors off of amazon, gonna try and re-solder a new port on the card before replacing the card. Additional Information: Additional Information: I am having the same problem but nothing has fixed it. I have replaced the card but still no results. Additional Information: I am having the same problem but nothing has fixed it. I have replaced the card but still no results.