Can the 2.2k water cooled spindle have internally clogged water ways? Mine stopped passing water.

Yes, our spindles can get build up over time dependent on how clean you keep the water that will be cooling the spindle. We recommend replacing the water (tap water) every other week, unless you have a clear setup that has minimum amount of debris entry to your reservoir. Then we recommend every 2-3 weeks. To unclog we recommend using an air compressor to push as much debris out and then using the water pump to clear the remaining debris through running water. Additional Information: I have big problem with my water colling system on CNC. I think some things are internally clogged on water cooled spindle.. It's not debris, It's heavy than debris.. Please help me immediate if you can.. Additional Information: I have big problem with my water colling system on CNC. I think some things are internally clogged on water cooled spindle.. It's not debris, It's heavy than debris.. Please help me immediate if you can.. Additional Information: i have problem with my water cool spindle. it heatup and water is not comming out properly. what should i do. my email is mwjm1974@gmail.com