CNC Questions And Answers

On the YL600 VFD which connections are DCM, ACM...

On the YL600 VFD which connections are DCM, ACM, V1 & Forward?

On the YL600 VFD which connections are DCM, ACM...

On the YL600 VFD which connections are DCM, ACM, V1 & Forward?

What are the fault conditions of the DM556 and ...

What are the fault conditions of the DM556 and DM542 drivers?

What are the fault conditions of the DM556 and ...

What are the fault conditions of the DM556 and DM542 drivers?

How can I determine which wires on my stepper m...

How can I determine which wires on my stepper motor bellong to A+ A- B+ or B-?

How can I determine which wires on my stepper m...

How can I determine which wires on my stepper motor bellong to A+ A- B+ or B-?

What happened to the blue chick v3.0? I have on...

What happened to the blue chick v3.0? I have one and I need a Z-Axis Mount for the dewalt dnp 611 router. The colt is nolonger supported by Precise bits.

What happened to the blue chick v3.0? I have on...

What happened to the blue chick v3.0? I have one and I need a Z-Axis Mount for the dewalt dnp 611 router. The colt is nolonger supported by Precise bits.

Hi I recently replaced my parallel port breakou...

Hi I recently replaced my parallel port breakout bored with a USB breakout board, Motors Earl working properly but my wireless MPG is not working properly, it is jerky when...

Hi I recently replaced my parallel port breakou...

Hi I recently replaced my parallel port breakout bored with a USB breakout board, Motors Earl working properly but my wireless MPG is not working properly, it is jerky when...

How fast can I cut 1/4" wood with the 40 watt C...

How fast can I cut 1/4" wood with the 40 watt CO2 laser?

How fast can I cut 1/4" wood with the 40 watt C...

How fast can I cut 1/4" wood with the 40 watt CO2 laser?

I purchased a Blackfoot 4ft X 8ft in 2015 I hav...

I purchased a Blackfoot 4ft X 8ft in 2015 I have yet to run it. Do y’all offer any classes that can help me?? I would very much like to...

I purchased a Blackfoot 4ft X 8ft in 2015 I hav...

I purchased a Blackfoot 4ft X 8ft in 2015 I have yet to run it. Do y’all offer any classes that can help me?? I would very much like to...

I was wondering what you recommend to use to co...

I was wondering what you recommend to use to cool your spindle when continuously exposed to freezing temperature. Can I use winter windshield cleaner (cheap) or do I have to...

I was wondering what you recommend to use to co...

I was wondering what you recommend to use to cool your spindle when continuously exposed to freezing temperature. Can I use winter windshield cleaner (cheap) or do I have to...

I can turn the flood coolant on using the toogl...

I can turn the flood coolant on using the toogle in Mach3 so Mach3 is talking to the PokeysCNC board (using output3). In spindle setup, Output3 is assigned to flood...

I can turn the flood coolant on using the toogl...

I can turn the flood coolant on using the toogle in Mach3 so Mach3 is talking to the PokeysCNC board (using output3). In spindle setup, Output3 is assigned to flood...

My pokeysCNC board creates and analog signal of...

My pokeysCNC board creates and analog signal of 0-10V for 0 to 24000 spindle rpm just like it should from Mach3. However, when the spindle is on, the voltage only...

My pokeysCNC board creates and analog signal of...

My pokeysCNC board creates and analog signal of 0-10V for 0 to 24000 spindle rpm just like it should from Mach3. However, when the spindle is on, the voltage only...

reverse stepper motor direction on pokeys

How many poles on 1.5 KkW spindle? Customer se...

How many poles on 1.5 KkW spindle? Customer service says 2, the product guide for 2.2kW spindle says 4. Can't find anything definitive for 1.5 kW spindle.

How many poles on 1.5 KkW spindle? Customer se...

How many poles on 1.5 KkW spindle? Customer service says 2, the product guide for 2.2kW spindle says 4. Can't find anything definitive for 1.5 kW spindle.