Tech Video Clips
PWM (Pulse Width Modulation) Setting the Invert...
Inverted mode is where the pulse happens at the end of the period. Non-Inverted mode is where the pulse happens at the beginning of the period. In inverted mode, the...
PWM (Pulse Width Modulation) Setting the Invert...
Inverted mode is where the pulse happens at the end of the period. Non-Inverted mode is where the pulse happens at the beginning of the period. In inverted mode, the...
PWM (Pulse Width Modulation) Selecting the Corr...
There are two types of WGM (Waveform Generation Modes), phase correct or fast PWM. Within those modes, you can set the WGM to be CTC (Clear on Timer Compare) where...
PWM (Pulse Width Modulation) Selecting the Corr...
There are two types of WGM (Waveform Generation Modes), phase correct or fast PWM. Within those modes, you can set the WGM to be CTC (Clear on Timer Compare) where...
PWM (Pulse Width Modulation) General Discussion...
The 8-bit timer for the AVR can create a PWM using OCR (Output Compare Register). The OCR can be used as an overflow for the timer (CTC - Clear on...
PWM (Pulse Width Modulation) General Discussion...
The 8-bit timer for the AVR can create a PWM using OCR (Output Compare Register). The OCR can be used as an overflow for the timer (CTC - Clear on...
PWM (Pulse Width Modulation) General Discussion...
This video specifically applies to hobby servo control, but is a good discussion on using the 16-bit timer to create a PWM. The period can be created using the 16-bit...
PWM (Pulse Width Modulation) General Discussion...
This video specifically applies to hobby servo control, but is a good discussion on using the 16-bit timer to create a PWM. The period can be created using the 16-bit...
PWM (Pulse Width Modulation) General Discussion...
Phase Correct PWM is just the pulse positioned at the middle of the period. The timer/counter is able to do this because instead of the timer overflowing and resetting the...
PWM (Pulse Width Modulation) General Discussion...
Phase Correct PWM is just the pulse positioned at the middle of the period. The timer/counter is able to do this because instead of the timer overflowing and resetting the...
PWM (Pulse Width Modulation) Determine the Peri...
The period is determined according to what period the device that you will be delivering the PWM to will accept. In this case, the PWM is being sent to a...
PWM (Pulse Width Modulation) Determine the Peri...
The period is determined according to what period the device that you will be delivering the PWM to will accept. In this case, the PWM is being sent to a...