Tech Video Clips
On Paper: Schematic Converting AC to DC with Ex...
The AC (Alternating Current) first goes through a transformer to step down the voltage from the mains power (110v or 220v). The sine wave after the transformer is now a...
On Paper: Schematic Converting AC to DC with Ex...
The AC (Alternating Current) first goes through a transformer to step down the voltage from the mains power (110v or 220v). The sine wave after the transformer is now a...
On Paper: Schematic Best Practice - The Ground ...
The ground (GND) symbol should be drawn pointing down (like it's pointing to the ground). The positive voltage is best draw pointing up. This is a best practice tidbit. just...
On Paper: Schematic Best Practice - The Ground ...
The ground (GND) symbol should be drawn pointing down (like it's pointing to the ground). The positive voltage is best draw pointing up. This is a best practice tidbit. just...
On Paper: Regulator in the Context of a Power S...
Regulators are used after the power supply has been converted to DC from AC. The regulator requires capacitors to create a current that the regulator will accept. The lowest portion...
On Paper: Regulator in the Context of a Power S...
Regulators are used after the power supply has been converted to DC from AC. The regulator requires capacitors to create a current that the regulator will accept. The lowest portion...
On Paper: PWM (Pulse width Modulation) Brief De...
PWM is a digital way of outputting a specific voltage between the top and bottom voltages (i.e. 5v to 0v). The output would be a pulse within a period of...
On Paper: PWM (Pulse width Modulation) Brief De...
PWM is a digital way of outputting a specific voltage between the top and bottom voltages (i.e. 5v to 0v). The output would be a pulse within a period of...
On Paper: Power Requirements of the Atmega32 an...
The power requirements for the the two microcontrollers (Atmega32 and Atmega324): Atmega32 - 4.5v to 5.5v Atmega324A - 1.8v to 5.5v (a much broader range of voltages) Atmega324P - 2.7v...
On Paper: Power Requirements of the Atmega32 an...
The power requirements for the the two microcontrollers (Atmega32 and Atmega324): Atmega32 - 4.5v to 5.5v Atmega324A - 1.8v to 5.5v (a much broader range of voltages) Atmega324P - 2.7v...
On Paper: On Paper: Part 2 Accelerometer Described
Accelerometer will contain the ability to measure one of more axes. In this case, an axis is a plane about which the accelerometer is tilted, or a direction on which...
On Paper: On Paper: Part 2 Accelerometer Described
Accelerometer will contain the ability to measure one of more axes. In this case, an axis is a plane about which the accelerometer is tilted, or a direction on which...