Tech Video Clips
On Paper: ADC (Analog to Digital Conversion) AD...
The ADC allows the data registers (ADCH and ADCL) to be right adjusted or left adjusted. This makes it easier to pull the number out of the data registers (ADCH...
On Paper: ADC (Analog to Digital Conversion) AD...
The ADC allows the data registers (ADCH and ADCL) to be right adjusted or left adjusted. This makes it easier to pull the number out of the data registers (ADCH...
On Paper: Accelerometer Described
An accelerometer measures acceleration. The unit of measurement for acceleration is m/s/s or m/(s^2): meters per second per second, or meters per second squared. Generally, accelerometers measure gravity which is...
On Paper: Accelerometer Described
An accelerometer measures acceleration. The unit of measurement for acceleration is m/s/s or m/(s^2): meters per second per second, or meters per second squared. Generally, accelerometers measure gravity which is...
On Paper: A Brief Description of PWM on Creatin...
In non-inverted mode, the pulse is stared at the beginning of the period. The Period to match 50 Hz (20 ms period time frame), a timer/counter is used and the...
On Paper: A Brief Description of PWM on Creatin...
In non-inverted mode, the pulse is stared at the beginning of the period. The Period to match 50 Hz (20 ms period time frame), a timer/counter is used and the...
On Paper: A Brief Description of PWM Non-Invert...
Nonm-Inverted mode is where the PWM signal starts at 5v and the jumps down to 0v within the period. The pulse is located at the beginning of the period.
On Paper: A Brief Description of PWM Non-Invert...
Nonm-Inverted mode is where the PWM signal starts at 5v and the jumps down to 0v within the period. The pulse is located at the beginning of the period.
On Paper: A Brief Description of PWM Inverted Mode
Inverted mode is where the PWM signal starts at 0v and the jumps to a 5v within the period. The pulse is located at the end of the period.
On Paper: A Brief Description of PWM Inverted Mode
Inverted mode is where the PWM signal starts at 0v and the jumps to a 5v within the period. The pulse is located at the end of the period.
Only one interrupt can be handled at a time
There is only enough memory to handle a single interrupts. If there is a desire to handle two interrupts, only one of them will fire is the current interrupt is...
Only one interrupt can be handled at a time
There is only enough memory to handle a single interrupts. If there is a desire to handle two interrupts, only one of them will fire is the current interrupt is...