BuildYourCNC
Flexible Kupplungssets - Verbindet einen einzelnen Motor mit einem Spindelende (Zwei Naben und eine mittlere Spinne)
Flexible Kupplungssets - Verbindet einen einzelnen Motor mit einem Spindelende (Zwei Naben und eine mittlere Spinne)
Verfügbarkeit für Abholungen konnte nicht geladen werden
Flexible Kupplungsätze – Verbindet einen einzelnen Motor mit einem Spindelende (zwei Naben und eine mittlere Spinne). Wir haben eine Auswahl an Bohrungsdurchmessern (Wellendurchmessern). So wählen Sie: Die erste Messung bezieht sich auf die eine Seite und die zweite Messung auf die gegenüberliegende Seite, ganz einfach. Angenommen, Sie haben eine 1/4 Zoll Motorwelle und die Leitspindel ist 5/8 Zoll, dann benötigen Sie eine 1/4 Zoll auf 5/8 Zoll Kupplung. Jede Kupplung besteht aus drei Teilen: zwei Naben und einem Einsatz.
Teilen
Questions & Answers
Have a Question?
-
What is the OD and the overall length of this coupler?
OD: 27.35 mm/1.08 in
Length: 42.80 mm/1.69 in
-
Is a 2x4 -> 4x8 upgrade kit available? or plans to cut parts.
We still have the upgrade available for purchase however we currently have done quite a few updates to our website. So it is currently been moved, the total price minus shipping was at $1,041.00. That price will include the all the wood gantry pieces, rails, driver/motor, and the hardware that will be needed for the upgrade. Please email customerservice@buildyourcnc.com for further assistance.
-
How feasible would a vacuum hold-down system be for a vertical CNC like the greenLean?
Building a vacuum table, for any CNC machine is possible but doing it right might take a adequate amount of information and extensive planning. Depending on the overall complexity you want to build. Example, you want sections, and valves that can be operated to close sections of the table to allow vacuum to a specific spot of you material. It is possible and would be a very precise method to hold down your material. Additional Information: Thanks. It may be something I'd like to try on my greenLean at some point. Dan Spangler wrote a nice article on building a "Universal" CNC vacuum table in the latest issue of Make magazine, volume 41.
-
Is there extra backlash with these installed?
Yes, there is backlash with flexible couplings. The backlash exists between the spaces of the buna spider and the hub connection. The fit is tight, but there is a bit of backlash, and over time, the buna spider can change in dimension, causing more backlash. These couplings are best used on leadscrew with a tight pitch.