The ANYCUBIC Wash and Cure 3 Plus Station is an upgraded 2-in-1 solution for post-processing resin 3D prints. With its larger capacity, innovative features, and improved efficiency, this station streamlines the cleaning and curing process for a wide range of resin 3D printers, including the ANYCUBIC Photon Mono series and other LCD/SLA/DLP printers.
The amazon pick button is an affiliate link specifically curated for your benefit. With our knowledge, we scour the 3D printing space for the most exceptional 3D resin printers.
Enhanced Capacity and CompatibilityThe ANYCUBIC Wash and Cure 3 Plus boasts an upgraded washing size of 8.97" x 5.03" x 10.23", with an increased washing basket volume of 7.6L - about 13.4% larger than its predecessor. This expansion makes it compatible with a broader range of LCD 3D printers, including the Photon Mono M5s, Photon Mono M7 Pro, Saturn 3/4 series, and other printers up to 10.6 inches.
Innovative Flexicure Gooseneck Light
A standout feature is the Flexicure gooseneck light, which increases energy value by 30,000µW/cm² in the 1-3cm irradiation range. This design significantly enhances the curing effect on intricate areas like model tops and figure skirts. The adjustable light tube adds flexibility to the curing process.
Improved Curing Uniformity
The Wash and Cure 3 Plus incorporates a new arrangement of lamp beads combined with a lens light source. This results in a 20% improvement in curing uniformity compared to the previous generation, ensuring a more thorough and comprehensive cure across the entire model.
Efficient IPA Utilization
The dual-layer PP material cleaning basket is designed for efficient use of isopropyl alcohol (IPA). It supports washing with the printing platform attached and offers two adjustable heights (150mm and 250mm), accommodating printing platforms from 6.6 to 10.6 inches. This feature maximizes alcohol usage efficiency, an important consideration for frequent users.
Dual-layer Curing Design
A specially designed double-layer curing platform increases the number of models that can be cured in a single cycle, significantly improving overall curing efficiency.
Additional Features and Specifications
Dimensions: 16"D x 23.62"W x 15"HWeight: 7 KilogramsMaterial: Aluminum construction for durabilityCompatibility: Suitable for a wide range of LCD/SLA/DLP 3D printers
Wavelength Considerations
While not explicitly stated in the product description, it's important to note that most resin curing stations, including this ANYCUBIC model, typically use UV light in the 395-405nm wavelength range. This spectrum is optimal for curing most standard 3D printing resins. Users should ensure their resin is compatible with this wavelength range for effective curing.
Safety Features
The product description doesn't detail specific safety features, but users should look for:
UV-blocking lid or enclosure to protect eyes and skin from UV exposureAutomatic shut-off timer to prevent overcuringStable base to prevent tipping during operation
Ease of Use
The station appears designed for user-friendly operation with its adjustable features and dual functionality. The gooseneck light adds versatility to the curing process, allowing users to target specific areas of their prints.